Satellite P300-1CN - blurry video and damage

Similar Questions

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Satellite P300-1CN has installed Bluetooth?

  I just bought this laptop bluetooth anf it says on the box, but I can't seem to find it anywhere

  Can any1 help me at all and tell me where it is and how to enable it?

  Hello

  I checked the specs on the Toshiba Satellite P300-1CN site and it seems that this laptop is not equipped with Bluetooth so that you can t enable this :(

  You can only buy an external Bluetooth USB adapter. It s not expensive nowadays and you can therefore use Bluetooth too! :)

• Satellite P300-1CN - error message when download of MSN messenger

  I recently updated my Satellite P300 - 1CN PSPCCE to Windows 7, after this everything seems to work ok but if I try to download msn messenger is comes up with an error saying the file may be corrupted hr: 0x8007000d.

  I am not the most technical of the world, but would like to know what I need to do on this issue!

  Help please!

  Hi Brian,.

  I think that it of really difficult to tell why you get an error when you download MSN messenger.
  Where do you download the Messenger? You should try MSN or Microsoft page.

  This will happen if you click on download or start the downloaded file?

  Have you noticed this behavior with other downloads too?

• Satellite P300-161: alarm low and criticism not fire

  Hello.

  I just bought a Satellite P300-161 with Vista and every time alarm if there is only a pop-up notification at the low or critical level, you but no sound alarm. I checked the settings under "advanced power management" and "battery" and both have the value default to 'ON' for low and critical battery alarm.

  I also made sure there is a noise linked to these events under 'Hardware and sound', 'System sounds' and "low battery alarm" and a criticism.

  The default sounds are really sweet so I registered and chosen my sensors clean up but still no luck.

  I did a search on google and apparently several people had the same problem. In addition to suggest to both look like the above parameters, some have said that it is a general problem with Vista that will be fixed with service pack 1. I already service Pack1 so that does not solve it.

  The other thing that I found via google is that apparently Vista doesn't offer it through the message system, but makes it available for 3rd party software. It seems ridiculous that Toshiba withdrew its usefulness because of power management especially in Vista.

  I wouldn't mind an alarm from the BIOS, but looking at the settings, I couldn't find all the options. I can only note a pop up and if I play music or something, I have completely run out and the computer into hibernation which is really annoying.

  I would be grateful if anyone has any suggetions on how to solve the problem.

  Alfonso.

  Open the Volume mixer and make sure that Windows sound option is not set to mute.

• Satellite C650-1CN - no start and secure Windows 7

  Here's the problem:
  Satellite C650-1CN, after exactly 30 days Windows 7 blocked, and now push the power botton, the pc entirely, then start?

  Hello hans,.

  Wait a minute: what's the problem now?

  Can you start your computer and access the Windows?
  Or the computer does not start and you have a black screen only?

• Satellite P300-1CN - failed to create the recovery disk

  Hi, I tried to create the disks of backup for my new P300-1CN recovery, but I get a power calibration error (error code: 0E01B5-26-00037304) when the progress gets 50% on the first disc of "current" bar and 25% along the bar of"progress".

  I have now tried 3 times and exactly the same thing happens every time.

  I have the cable power in and power on a full battery.

  Any ideas?

  G.

  Hello!

  Have you tried the disks from different manufacturers? I prefer to use DVD - R Verbatim and TDK discs.
  Check it!

  Also on the site of Toshiba, I can find a few updates firmware for the CD/DVD drive. Check if you have such a unit and update the firmware.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite P300-1 year - backward and forward compatibility

  Hi all

  fisrt of all thanks in advance to anyone who could help me.

  I had some problems with my Satellite P300-1 year, which comes with Vista Home premium, I think that for some 'bad' something SW installation becomes to be 'unstable' (i.e. help guide disappeared and also search folder no longer works, other things more "spots"...).

  So, since vista is not my favorite one (start too long), I intend to advance towards the back (Win XP, which I already drive), or (windows 7, I need to buy).
  So here's the question: is compatible P300-1 year (I want to say is there every driver available for) under Windows XP or Windows 7.

  Latest: is it possible to upgrade directly WITHOUT doing a CLEAN install (to avoid the backup or re - install SW) from vista to 7 (and if yes which: home, pro, ultimate?).

  Thanks again
  BRs

  Hello

  You can use both: Win XP and Win 7.
  But I prefer Win 7 because it is the most recent Windows system and the best.
  In addition, Win 7 will build more Win XP and all new applications are designed for Win 7.

• Blurry video and text after rendering

  Recently, I was faced with a problem with Premiere Pro CS6. For some reason after I made video after the addition of some sort of effect (usually RGB curves), rendering the image is blurred in the program monitor. It is the same for the text. I'll go in the RGB curves and twist it slightly to get it non-rendus and it appears as sharp as possible. Exporting is another matter. So I make my pictures and everything looks blurry, but the final exported mp4 seems fine, apart from the text. The text is still not clear after rendering. For now, I do not make my text when I export and the text looks sharp in final mp4. Anyway to fix this? Or is it just a bug?

  There are settings for your images in the "Sequence settings" dialog box

  Perhaps you could look under sequence and sequence settings and show us what you see there. If you change in 1920 X 1080, for example, and your images are half this size, that could be the reason for you to be unhappy with the program monitor, but not your exports.

• Satellite P300 question, shuts down and does not restart intermittently.

  My wifes p300 presents a very confusing and annoying problem. She is now on her 3rd replacement the last two having the same problem.

  I just turned off intermittently for no reason, a few times, it will restart but sometimes he used. So if I remove the battery and plug in the power that it restarts again however it then turns off again and do not restart unless the battery is returned. I think it may be a problem with the battery and the power cable as she said that the problem will only get worse if the computer will run on battery power for a while.

  I was wondering if anyone else has experienced this problem or had any suggestions as to what could be the problem.

  Bill has soon

  Hello Bill and please describe your opinion on this subject. Reading your first post I ve also thought it should be overheating issue, but after this second announcement, I imagine that the food may be responsible for this turn off suddenly question.

  Please post the results of the investigation. It can be really interesting to know what the problem is here.

• Re: Satellite P300-156 - grainy display and vertical lines on it

  Hello

  whenever I have 1st start of the machine, the screen looks grainy and with 1 green line vertically down the right side of the LCD screen.

  When Vista is finished startup (with my white screen), there are a lot of pink coluring on the icon, when I press "start" and it displays programs, etc., the abckground is all pink! Also the web cam settings/opener popup displays the same.

  To get rid off this, I restarted the machine and everything if fine. It is the only way to rectify.

  Last week, I tried again to look into the problem...

  I changed the LCD, drive hard (updated to 320 GB) and updated the BIOS with the latest version of this site. Now it wil has always do the same thing, but after 30 seconds (or almost) it is automatically sorts.

  I really think this sort want someone at - it ideas?

  Thanks in advance!

  Maybe the BIOS update solved the problem. ;)
  Anyway watch carefully what happens in the future.

• Satellite P300-1CN - impossible to find a program for webcam

  My webcam does not work since I upgraded to Windows 7 with the offer of Toshiba. More precisely, I can't find a program to run with. I checked Device Manager and that's where, and the driver is functional and up to date. Help please!

  Hello

  You have already installed Camera Assistant software Toshiba's official website?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  This program contains the driver for the webcam and webcam program.

  Check it!

• Satellite P300 - stuttering with new BIOS and drivers for sound card

  I have Toshiba laptop Satellite P300 (PSPCCE) with Vista and the latest patches installed.
  Everything was working ok until I installed the last set of patches, has been the Tempro alert about them. I installed the new BIOS (3.40) and card drivers his (Conexant 4.83.1.0) and now all the minutes I see spike high CPU spike freezing enemy of system one or two seconds.

  I see in Process Explorer these spikes are caused by the system and that usually means drivers.
  Anyone else noticed something similar since the last update?

  BTW. There are 2 audio drivers to download site, 4.36.10.0 the 25.05.2009. but the file is named 20081201122001 sounds. ZIP and 4.83.1.0 as of the 07.05.2009. named sound - 20090507143928.zip but with a date more recent AI apparently from 2008.

  > btw. There are 2 audio drivers to download site, 4.36.10.0 the 25.05.2009. but the file is named 20081201122001 sounds. ZIP and 4.83.1.0 as of the 07.05.2009. named sound - 20090507143928.zip but with a date more recent AI apparently from 2008.
  I think that you should use the most recent version and it s a v4.83.1.0. It seems that the v4.36.10.0 was published also, but in this case, it s always recommended to take a newer version.

  With regard to the system of freezing for a second or two:
  I think that this might be related to some background processes. Perhaps a process that runs in the context of the Vista operating system causes this tiny interruptions.

  Of my knowledge tool Tempro runs in the background and scans the system and HARD drive.
  You can check the processes in MSCONFIG and if necessary may disable some of the trials.

• Click right button does not not on Satellite P300 - 19 p

  Hello

  Monday, I bought a Toshiba Satellite P300 - 19 p.
  And I love it! : ^ 0 *

  Only today I turn it on and my right click button does not work! :-(
  I would appreciate any help that can get the button works again before I decide to drive to the store with the cell phone.

  Thank you
  Claire

  Hello

  what you man exactly when you say that the right button does not work? What do you do with it?

  Do you mean the external mouse or button of the laptop?

  You can reinstall the mouse driver. Search for the driver on the site of Toshiba for touchpad drivers or the manufacturer s Web site form the external mouse.

• Satellite P300 connected via HDMI receiver Onkyo 607 - no sound

  Hello

  I have the Satellite P300 1BB for awhile and I'm very happy with it. But now I have a problem with the P300 HDMI port. I connected with my Onkyo TX - SR 607 5.1 receiver HDMI. The image is there, but there is no sound. If I connect the P300 directly to my plasma tv, then there's sound through HDMI.

  I have updated the Conexant audio driver to version 4.83.1.0. The Panel mixer, audio, the audio driver for AMD HDMI Conexant is not connected when I use the 607. It is connected (and works perfectly) if I use the plasma tv.

  Is it possible to get this working?

  Hello abdoulraak

  Please don't be crazy about me, but how you write that you have problems with port HDMI on Satellite P300 when working with TV. I think you have problem with your receiver Onkyo 607.
  All of these updates will be not useful at all and you should check s manual Onkyo to see how it works and what kind of parameters that you can use the receiver itself.

  You have activated a right channel of the receiver? I have big receiver Technics and all the ports on the back will be used with a separate channel that needs to be enabled.

  See receiver manuals and collect information how it works exactly.