Satellite P300-21F - display drivers error in the Windows XP support site!
Hello from Greece!
Satellite P300-21st model PSPCCE, I bought 3 days ago and I am still installing display drivers for the ATI Mobility Radeon HD 4650 graphics card.
The drivers that are provided on the official website of support are wrong, because they are for the Mobility Radeon HD 34xx/36xx series, not the 46xx series.
Installing drivers is impossible and please give me a solution for this problem.
I have already informed the local partner of TOSHIBA named IDEAL.
Kind regards.
The driver for Win XP is NOT bad!
The fact is that the same notebook was equipped with 3 different graphics chips!
The series of laptop Satellite P300 PSPCCE uses graphics chips: Radeon HD 34xx/36xx/46xx series
The driver on the page is designed and compatible only with Mobility Radeon HD 34xx/36xx chip. It does not support the 46xx series.
Unfortunately, it seems that XP driver for your graphics card is not yet out.
Maybe you should check some 3rd party Web page for a compatible XP driver for Mobility Radeon HD 46xx
Tags: Toshiba
Similar Questions
-
Satellite T130-02F - display driver error
Hello
I just bought the Satellite T130-02F and after choosing 32-bit operating system, I had the power to recharge the battery and then started to get 'to display driver errors"where the screen black flash and then flash back on. I checked Device Manager and Driver Details, the reader is up to date and as far as I can see is the suitable driver. I searched websites to see if there are other drivers out there ar, but its update.
I have nothing more have not installed on the computer again and find that I get the error more regularly on the farm rather than power, that concerns me. The computer is less than 24 hours old.
Any advice?Mobile Intel (R) display firmware.
Windows 7 32-bit is installed.Hello
In your case I would try to reinstall the display driver. You can find the latest version on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversAfter that, make sure that the latest version of the BIOS is installed. You can download the Toshiba site too.
If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and should be checked for professional people.
Welcome them
-
Microphone does not work on my Satellite P300-21F
Hello
I formatted my pc from windows Vista to windows 7 (32-bit) and for some reason any microphone does not work. Any ideas or where can I find the right drivers to download. I have the Toshiba Satellite P300-21F
Thank you
I installed Win7 32 bit on brothers P300 and it works properly.
Have you installed driver sound right?
When you open the sound properties > recording devices is the Microphone which is are listed? -
I used to be able to watch VIDEO (including the .avi) files in the preview pane in windows Explorer, but it has since stopped working. This change took place after the update to the latest version on windows media player. (version 12.0.7601.18150)
attempted fixes:
1. in options from files of the variations of tab - all reviews of checking / unchecking "always show icons, never thumbnails" and "show previewhandlers in the preview pane. the first has nothing to do with this problem. However, the 'show previewhandlers... '. "when checked this error message is displayed in the preview pane" "this file cannot be previewed because of an error in the windows media player rich preview Manager." When unchecked the poster preview pane a thumbnail with the icon of the program it is supposed to open, in the present case, WMP, this correction allows the preview of the PHOTO but NOT of VIDEO. " also I reset by default, of course.
2. they also examined the options under system settings panel-advanced control and troubleshooting without success.all the less someone ' one can confirm that there is a problem with windows media player? or it comes from windows Explorer?
UPDATE:
https://www.YouTube.com/watch?v=xBgrJ3XO-Z8This shows that the problem is with WMPRPH.exe (Windows Media Player Rich Preview Handler) it happens when wmprph farm, now if someone knows how to impose this program to continue to work as it should which would solve my problem.
-
I get an error message, the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Is there any solution for this? Also I can't find service.msi. Make sure you typed the name correctly and then try again. Any help I can get for this will be appreiated. System restore not working anymore. Carolyn Stallings
Always, always, first specify what operating system you are using before you begin to explain the problem.
Try this tutorial. It works for Vista and Win 7.
http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/
-
error downloading the Windows install cleanup
error downloading the Windows install cleanup, c:\docume~\owner\local~1\Temp\ixp000.tmp\startmsi.vbs do not know what to do. Help, please
Hello timbo 1976,.
The Microsoft Installer Cleanup (MSICU2.exe) utility has been removed as this may damage some of the files on the computer. The tool has been replaced by a new installation and uninstall set, you can download and run the tool from here:
http://support.Microsoft.com/kb/2438651
Hope this helps
Bobby
-
I just reinstalled XP pro and I can't get the updates from the windows update web site. Whats up with this please help
There is no way that anyone might be able to help without more. My initial guess and it is just a guess, is that you have to update Internet Explorer .v8. Click HERE and download IE8 and install it. Try again updates once the installation is complete.
-
Re: Satellite P200-1EE - displays an error message in the windows Boot Manager
I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.It also reads this:
File: \BOOT\BCD
Status 0xc000000f
Info: an error occurred trying to read the boot configuration data.Does anyone know how to deal with this, or this happened to anyone before?
Hello
Maybe this article can help http://support.microsoft.com/kb/927391
-
Problems with my satellite P300 - 15 ° C to start after the upgrade to windows7
After that I installed windows 7 on my laptop Toshiba Satellite P300 - 15 c every time I start my laptop it gives me an error until I get home the log on screen with my user account.
He says the following:
Microsoft C++ Runtime Library
This application has requested the execution in an unusual way.
For more information, contact the application support team.I can press OK or closing 'X' top right of the window. When I push one of these buttons several times (any one it seems) my phone enters the login screen correctly.
However, naturally I'm not really satisfied with this condition to my laptop. Advice how can I solve this problem?
Thanks in advance,
Heuts
Work for an answer please.
-
Satellite A30 XP latest drivers - found on the Site of Toshiba Canada
RE: Toshiba Satellite A30 XP drivers
After several days of trying all the drivers on the Tosh Europe site and get errors, I found the latest Satellite A30 for XP drivers on the Tosh Canada site.
http://209.167.114.38/support/download/files_downloads/index/satellite/sa33en.htm
Hello
Usually, a common driver installation procedure should get the modem to life.
The installation is very easy. Most of the time you must only start the installation file, but you can also try to install the driver from the Device Manager.
There is also an option to roll back the driver. That you can use if you have installed a modem not compatible or bad driver. -
Satellite P300 - wrong display resolution
Hello
I have Toshiba Satellite P300 and my display work stoppage last month, it does not display anything only turn on the light for a few seconds. So I buy a new and that display all but a bad resolution or Idont know what to see photo
http://ImageShack.us/photo/my-images/64/imag0360ue.jpg/
http://ImageShack.us/photo/my-images/151/imag0362m.jpg/Thanks for help
Hey Buddy,
So you replaced the display yourself?
For me it's like this, you have a bad display that is not compatible.
-
Satellite A135 - S2246 Display drivers for Windows XP
Hello
I have a problem with the display drivers for my laptop. Have ati chipset ATI XPress 200 M 128 MB and I need drivers for windows xp. I downloaded the drivers from ati websides and it does not find my chipset. Toshiba.com, is to be drivers for windows vista. I am looking for web and found forums where someone write "Toshiba Satellite A135-S2246 u must download OMEGA Drivers and it works." I downloaded the drivers and it work, but in windows XP, I have 64 MB of memory. When I have Buyed I Grand Vista and Ati 128 MB memory. Please help me!
Maybe you have the right drivers for my card (chipset).
You founded the pilot. It works and you can use Windows XP Home edition on your laptop.
Is it therefore no serious problems or you are just irritated due to information 64 MB?
-
Satellite P300 - cannot find drivers for Win 7 32 bit
I have the Toshiba Win7 install discs, but I have 2 questions.
1: I installed the 32-bit version, but I can't find the 32-bit drivers (reinstalled). The Australian Toshiba site is the only one that recognizes my model (PSPCCA OC201Y), but it offers only drivers for win7 64 bit.
2: I'd really rather do a clean install of the 64-bit system (the disk too) but it seems no way to do. In an upgrade, it offers the possibility, in a clean installation, it doesn't.
HELP PLEASE
> 1: I installed the 32-bit version, but I can't find the 32 bit drivers (reinstalled). The Australian Toshiba site is the only one that recognizes my model (PSPCCA OC201Y), but it offers only drivers for win7 64 bit.
Visit the page of the European driver Toshiba:
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EUChoose here P Satellite series-> Satellite P300 PSPCCE and Win 7 32 bit
Pilots should be available> 2: I'd really rather do a clean install of the 64-bit system (the disk too) but it seems no way to do it. In an upgrade, it offers the possibility, in a clean installation, it doesn't.
You need a Microsoft Windows 7 64-bit system disk. I doubt that Microsoft Win 7 32 bit disk also contains the 64-bit version.
-
Satellite P300D-15O - display drivers does not-XP/Vista
Hi all
After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.
Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!
THX, endo
Hello
In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.
I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.
You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.What do you think of this?
-
Satellite P300 - I can not turn off the microphone
Hello. There is my problem:
I can't disable the built-in microphone. When I connect another microphone in a mic - record goes on the two microphones.
If the webcam is disabled in Device Manager - microphone works nevertheless.
Change of sound intensity of a microphone in a mixer system - two microphones volume varies.Satellite P300 PSPC4E
Windows XPHi Thomas, this is already known, question - buggy / incomplete drivers for the conexant card, it is possible to cut the mic, but this feature has been disabled by the manufacturer! already half a year toshiba does not not for requests for the user on the Conexant drivers for Windows Vista cause! We need as much as possible, even application of various users push them to realize that this is a serious issue and build an update to solve this problem! Other manufacturers have already solved that for their products. Fans are also experimenting with the conexant drivers welcome!
all similar problems with this sound card I have described in details here:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128858#128858
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128859#128859
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128878#128878
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37343&TSTART=15
Maybe you are looking for
-
I read the article to trigger the new tab on this link page http://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off I used some add ons like viewmark, King of the tab, fvd access. These
-
Tecra S4-125 - no driver found
My (old) Tecra S4-125 is controlled by Word and I forgot my password. Windows XP is installed on this laptop and I want to install Windows 7 Ultimate version. But during installation, it seems that there are no drivers available. How is this possible
-
After trying to connect 3 times, I get the following message: System disabled 77343287 Thank you!
-
Windows server 2008 r2 outgoing smtp
Hello I have a dell t300 running windows server 2008 R2. It is running Hyper-v, also manage a virtual machine running windows server 2008 r2 with exchange 2010 sp1. Everything was fine, then all of a sudden, over the weekend, outgoing calls to port 2
-
What is the red circle icon that appears at the bootom of the screen
Original title: meaning of the following icon My cursor is frozen, and there is an icon in the bottom right of my screen of a computer screen with a red circle and line through it. Does anyone know what is this icon?