Satellite P300-22R - missing letters when you type too fast

Hello!

I found a lot of articles about my problem in the internet, but I have not found a solution

My keyboard on my P300-22R ist no longer works. If I write a little too fast, there are a few missing letters or they come twice.

I already read the http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm of Toshiba, that I should install a BIOS update to fix the problem. The update of the Bios was a success, the inexplicable laptop properly. But it doesn't seem to work so far. Still a few letters are missing.

Do you have any other ideas? It's really boring, write a text like this: Pei

Do you need information more?

Thanks for your help!

>... ist no longer works
How to understand this? And in the past, everything was OK?
What operating system do you use?
When you type a little slower is there a difference?

To be honest this problem on P300 is not known to me because I've installed on my Win7 32 bit a year ago and so far all brothers works perfectly.

Tags: Toshiba

Similar Questions

  • Satellite L750D-14R - keyboard missing letters when you type

    I recently bought a laptop L750D-14R and he has problems with the keyboard completely ignoring letters when you type.

    If I type any faster than the pace of 1 finger of each hand, and then I can abandon typing altogether.
    If anyone else has had a similar problem and if so is there a solution?

    Hello

    Yes, I know that this question.
    As far as I know that this has been fixed by the updated BIOS

    See the European driver of Toshiba page and download the latest BIOS for your laptop model.
    Update the BIOS and check how it works.

  • Missing letters when you type on Satellite M105

    I use a Satellite M105-S3084 (Windows XP MCE) and fighting in vain with a keyboard problem since I bought it first. I tend to type fast, especially the double letters and find that very often a single of double letters appears on the screen. For example, 'kk' translate to 'k' only and the similar missing letters even if not doubled. This causes a lot of waste of time correcting what I type.

    I know that there are parameters under control Panel\Keyboard ("repeat delay" and "repeat rate") which allow the adjustment of speeds, but I found the frustrating to use. I tried both with different settings and still have a problem with the missing letters. Maybe I don't know how to define that, and I just get frustrated, or there is another bet in another place which I do not know.

    Others have had this problem with the mising letters while typing and found a solution?

    Thank you.

    Hello, Jeff

    If I'm remembering right, there was a similar problem with the Satellite L10 and L20, I don't remember. This problem has been fixed with the new version of the BIOS. US models of laptops are not known to me, but if you have time you can check IRIS ask on the page we Toshiba. You will find many interesting documents.

    Check it out under the http://askiris.toshiba.com/ToshibaSupportSite/supportcentral/supportcentral.do?id=m1

    Maybe you will be lucky and find something on your problem with the keyboard.

  • After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is

    After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is

    What's with Firefox?

    Start Firefox in Safe Mode {web link} by pressing on the
    (Mac = Options)
    key and then from Firefox. A small dialog box should appear. Click start in Safe Mode (no refresh).

    Is always the problem?

    Start your computer in safe mode with network. Then launch Firefox. Try safe sites. Is always the problem?

    Start the computer in Mode safe;
    Free online encyclopedia

  • Satellite A200-1AI: keyboard missing letters when I type

    My keyboard seems to be missing a few letters when I type them. I have to type very slow to make sure that all the letters reach the screen. Any ideas?

    Hello

    The same thing happened to me. I use an old notebook and the problem has been resolved by the BIOS updated.
    It seems you laptop computer A200 is a series of very new and not very long on the market.
    That's why I put t think that new BIOS is already available.

    Take a look at the Toshiba page from time to time, and perhaps the new BIOS will be available.

    Best regards

  • Re: Satellite A60-106 - deleting characters when you type

    Hi, hoping someone here can help me...

    Toshiba Satellite A60 106 running Windows XP missing characters when I type. If I type very slowly every key works fine. Many letters are removed to normal typing speed. This happens in all applications and does not load. The key repeat rate is also slower that we should (I know how to define it, the problem is not with the setting but with the fact that the setting is not honored or recognized correctly).

    Virus/spyware scanner reports clean. The problem started all of a sudden for no apparent reason and does not seem to be associated with any hardware or software changes. Tried to start in safe mode, try to disable all non-essential progams services started via msconfg but to no avail. problem still there.

    Laptop has historically suffered badly from overheating, but this problem is not related of course it's the same thing that the machine is hot or cold.

    Any ideas?

    Have you installed drivers for a keyboard or an external mouse? (for example, Logitech or Microsoft)

    If you boot into MSDOS, it always falls of characters? You can download a boot BACK on www.bootdisk.com disk

    What BIOS version? You have the latest version?

  • Sam L20: Missing characters when you type

    Hi all!
    I have a problem with my brand new L20 miss a lot of characters when I type. After searching in the forums, it seems that a few people also have this problem. I was wondering if anyone has had any chance to fix this problem yet.

    As far as I know, the problem seems to be in Windows XP, (I dual-boot with Linux Slackware 10.2 and do not notice the problem here) and I * think * it might have something to do with the internet. I say this because it is really noticeable for me when I'm online, writing emails etc... (Written on this forum takes a lot of error correction) :)

    Has anyone else has been able to isolate when this problem is at its worst?

    Also, is it possible to group all those who encounter this same issue in a thread? I think that there are about 3 separate threads here where people have mentioned this problem, it would be nice to get everyone together to see if we can solve.

    I brought this laptop for programming, and as you can imagine I dare not try try any coding while what is happening, because it would cause too many problems :)
    So please, any help, advice, tips, advice or solutions would be welcome.

    Thanks in advance,

    Lee

    This problem only appears when you type :)))
    Solution of material: external USB keyboard!

  • Satellite P100: Lack of keystrokes when you type

    Hi, this is my first post on this (or any) forum, so I hope this makes sense.

    Someone else has had problems with missing keys while typing on a satellite p100. Basically, when typing I find that a couple of characters is omitted at random (every 5-6 seconds). This seems to happen with the internal keyboard, I have not noticed anything with my external USB keyboard.

    At first, I thought it was my typing, but if I hold down a key, I can see a visible shift every few seconds. Also if I Alternatively type '1' and '-' get ignored characters evry few keys, like this...

    1-1-1-1-1-1-1-1-1-1-11-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1--1-1-1-1-1-1-1-1

    .. .these symptoms suggest that perhaps it is not material, but I could be wrong

    Looking through the forums, I see similar problems with the M60 but no obvious solution. I don't think that someone came up with something?

    Thanks for the help
    -Chris

    Hello

    I don't think that the motherboard or a key USB, LAN, etc. is responsible for the problem of keyboard.
    I checked in similar forums on different units and especially a BIOS update solved all the problems of keyboard interrupt.
    You should check the page of the Toshiba driver to the most recent BIOS update. If there is no new version update of the BIOS so I am sure it will be available at a later date.

    Good bye

  • BlackBerry smartphones double letters when you type

    Hello

    My phone (BOLD 9700) started to double my letters, it's boring.  Any help?

    So I type an and get aa or aaa, I fed up

    Thank you

    Vicki

    This problem usually comes from the flattening of contacts tiny keyboard metal inside or corrosion from moisture. It is probably time to replace the unit.

  • with win10, cannot open a session in the banking sector, keyboard corrupts the letters when you type numbers, can connect with MS Edge

    Try to connect to NWOLB, when typing my customer number, the numbers to change the mailbox from a and moving in the alphabet, for example 12345 shows that abcde.
    The numbers are part correctly if I will allow you to join the site using Microsoft Edge.
    What is an incompatibility between Firefox and Windows 10, or what I need to change a setting somewhere I use the latest version of Firefox.

    Thanks people, problem solved...

    Yes, it was Trusteer Endpoint Protection - otherwise known as report - Nat West Bank customers and highly recommended by them who was at fault. Turn it off solved it... Maybe I'll look to see if IBM highlighted in an updated version.

    Once again thanks a lot...

  • My HP computer does not two identical letters to be typed side by side with a short break when you type.

    Original title: Hello!  I have a desktop HP running windows7. Typing is weird.   Any ideas?  See below.

    My HP computer does not two identical letters to be typed side by side with a short break when you type.  In addition, it seems that it's always allowing me to use the SPACEBAR and return key back.  Yet once, requiring a pause before it will be displayed on my written text.  I use Window7... I changed the keyboard and no imporvement in this problem... ?

    On Sunday, October 7, 2012 01:44:44 + 0000, RudolphMenchl wrote:

    Original title: Hello!  I have a desktop HP running windows7. Typing is weird.   Any ideas?  See below.

    My HP computer does not two identical letters to be typed side by side with a short break when you type.  In addition, it seems that it's always allowing me to use the SPACEBAR and return key back.  Yet once, requiring a pause before it will be displayed on my written text.  I use Window7... I changed the keyboard and no imporvement in this problem... ?

    Look in Control Panel | Region and language, on keyboards and
    Language tab. What keyboard layout you use?

    Ken Blake, Microsoft MVP

  • When you type an email etc. Satellite A300 - 16 c jumps to the last page

    Hello

    Can someone help?

    I have an a300 - 16 c.
    This problem is in my head.
    When you type an email etc. the computer jump back to the last page.
    It takes forever to do, I can do?

    Cheers in advance

    catch71

    First, what operating system are you using?

    What the page you mean exactly and have you checked if you didn't push the extra buttons accidentally?

  • I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

    I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

    Hold down the key (key in OSX) and press the following letters in this exact order: V T M
    The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

    See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

    Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

  • When you type cursor autour breaks.

    Y at - it qn update that I'm missing?  When I type in an e-mail, facebook etc the cursor away from the next typing letter.  The cursor and usually lie elsewhere in the typical region and that's where I am now typing.  Only make it work on the computer acer laptop and not on the comp. at home.  Thanks for the help.

    Hi Linda

    Because the keyboard is integrated in the housing of the computer laptop, something so simple that the vibration caused by typing can cause the touchpad the cursor or initiate a click, depending on sensitivity settings.

    You must disable the touchpad when typing. Most modern laptops provide an option or a keyboard shortcut to get there.

    Computers laptops ACER , to disable or enable the touchpad press and hold down the Fn key and press F6 or F7 . If you are still experiencing a problem, please contact Acer support for assistance

    Acer support - how to enable or disable the touchpad on the Acer Aspire One netbook? :

    http://Acer.custhelp.com/app/answers/detail/A_ID/3179/kW/touchpad/related/1

    Acer support - how to enable or disable the touchpad on my computer? :

    http://Acer.custhelp.com/app/answers/detail/A_ID/5700/kW/touchpad/related/1

    Concerning

  • What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

    What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

    The images could be anything - check the links Panel.

    What you see (and copy) is just the screen preview, not the actual image data.

Maybe you are looking for