Satellite L750D-14R - keyboard missing letters when you type
I recently bought a laptop L750D-14R and he has problems with the keyboard completely ignoring letters when you type.
If I type any faster than the pace of 1 finger of each hand, and then I can abandon typing altogether.
If anyone else has had a similar problem and if so is there a solution?
Hello
Yes, I know that this question.
As far as I know that this has been fixed by the updated BIOS
See the European driver of Toshiba page and download the latest BIOS for your laptop model.
Update the BIOS and check how it works.
Tags: Toshiba
Similar Questions
-
Satellite A200-1AI: keyboard missing letters when I type
My keyboard seems to be missing a few letters when I type them. I have to type very slow to make sure that all the letters reach the screen. Any ideas?
Hello
The same thing happened to me. I use an old notebook and the problem has been resolved by the BIOS updated.
It seems you laptop computer A200 is a series of very new and not very long on the market.
That's why I put t think that new BIOS is already available.Take a look at the Toshiba page from time to time, and perhaps the new BIOS will be available.
Best regards
-
Satellite P300-22R - missing letters when you type too fast
Hello!
I found a lot of articles about my problem in the internet, but I have not found a solution
My keyboard on my P300-22R ist no longer works. If I write a little too fast, there are a few missing letters or they come twice.
I already read the http://aps2.toshiba-tro.de/kb0/TSB1103370000R02.htm of Toshiba, that I should install a BIOS update to fix the problem. The update of the Bios was a success, the inexplicable laptop properly. But it doesn't seem to work so far. Still a few letters are missing.
Do you have any other ideas? It's really boring, write a text like this: Pei
Do you need information more?
Thanks for your help!
>... ist no longer works
How to understand this? And in the past, everything was OK?
What operating system do you use?
When you type a little slower is there a difference?To be honest this problem on P300 is not known to me because I've installed on my Win7 32 bit a year ago and so far all brothers works perfectly.
-
Missing letters when you type on Satellite M105
I use a Satellite M105-S3084 (Windows XP MCE) and fighting in vain with a keyboard problem since I bought it first. I tend to type fast, especially the double letters and find that very often a single of double letters appears on the screen. For example, 'kk' translate to 'k' only and the similar missing letters even if not doubled. This causes a lot of waste of time correcting what I type.
I know that there are parameters under control Panel\Keyboard ("repeat delay" and "repeat rate") which allow the adjustment of speeds, but I found the frustrating to use. I tried both with different settings and still have a problem with the missing letters. Maybe I don't know how to define that, and I just get frustrated, or there is another bet in another place which I do not know.
Others have had this problem with the mising letters while typing and found a solution?
Thank you.
Hello, Jeff
If I'm remembering right, there was a similar problem with the Satellite L10 and L20, I don't remember. This problem has been fixed with the new version of the BIOS. US models of laptops are not known to me, but if you have time you can check IRIS ask on the page we Toshiba. You will find many interesting documents.
Check it out under the http://askiris.toshiba.com/ToshibaSupportSite/supportcentral/supportcentral.do?id=m1
Maybe you will be lucky and find something on your problem with the keyboard.
-
How can I stop my laptop keyboard jump letters when I type
How can I stop my laptop keyboard jump letters when I type
Hello anitadaniels,
In Control Panel, click the mouse/keyboard.
Check on the sensitivity of the mouse, which makes it not so sensitive.Let us know if that helps.
Marilyn
-
After upgrading to W10 1607, I get a tilde in front of some letters when you type in FF and FF only ~ l ~ ike th ~ is
What's with Firefox?
Start Firefox in Safe Mode {web link} by pressing on the
key and then from Firefox. A small dialog box should appear. Click start in Safe Mode (no refresh).
(Mac = Options)Is always the problem?
Start your computer in safe mode with network. Then launch Firefox. Try safe sites. Is always the problem?
-
Sam L20: Missing characters when you type
Hi all!
I have a problem with my brand new L20 miss a lot of characters when I type. After searching in the forums, it seems that a few people also have this problem. I was wondering if anyone has had any chance to fix this problem yet.As far as I know, the problem seems to be in Windows XP, (I dual-boot with Linux Slackware 10.2 and do not notice the problem here) and I * think * it might have something to do with the internet. I say this because it is really noticeable for me when I'm online, writing emails etc... (Written on this forum takes a lot of error correction) :)
Has anyone else has been able to isolate when this problem is at its worst?
Also, is it possible to group all those who encounter this same issue in a thread? I think that there are about 3 separate threads here where people have mentioned this problem, it would be nice to get everyone together to see if we can solve.
I brought this laptop for programming, and as you can imagine I dare not try try any coding while what is happening, because it would cause too many problems :)
So please, any help, advice, tips, advice or solutions would be welcome.Thanks in advance,
Lee
This problem only appears when you type :)))
Solution of material: external USB keyboard! -
Satellite L750D-14R - BOOTMGR missing Press Ctrl, Atl del to restart"
Hey guys, I need help with my laptop L750D-14R.
Basically, I have a 500 gig HDD in it, which is divided into 2 partitions, one with my operating system on it and the other as a data disc for backups etc. somehow my bootable disc obtained is passed from one partition to the oher, so whenever I start now it comes up with 'press BOOTMGR missing Ctrl Atl delete to restart'
Anyone know how I can pass the boot drive partiion else?
Thanks in advance.
By default the BIOS settings and try restarting Windows preinstalled.
-
How can I stop my laptop keyboard jump letters when I type an email?
my keyboard letters are jumping letters as I type only when I type an e-mail. How can I prevent this accident?
HI anitadaniels,
If it happens only in Gmail, then I suggest to go through their support:
http://support.Google.com/mail/?hl=en
Thank you!
-
Satellite L670-1J0 - keyboard missing letters guard
Hello.
It started to happen a few days ago and I recently bought this laptop about 4 weeks ago. Anyway, whenever I type, keyboard guard running out of letters, symbols, and spaces. It doesn't seem to be a pattern whose lettters etc. are left out. It looks like a delay between each letter while typing / keyboard is slow to respond.
Any ideas?
Thank you.
Hey,.
I think that in this case why you use an older version of BIOS. On the Toshiba Web site, there is an update to resolve this problem:
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jspBut I m wondering about your question. Have you done a search forum before? I found a lot of discussions with the same behavior and update the BIOS has always been the solution for this problem:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=231488
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=231493
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=236329Check this box!
-
Try to connect to NWOLB, when typing my customer number, the numbers to change the mailbox from a and moving in the alphabet, for example 12345 shows that abcde.
The numbers are part correctly if I will allow you to join the site using Microsoft Edge.
What is an incompatibility between Firefox and Windows 10, or what I need to change a setting somewhere I use the latest version of Firefox.Thanks people, problem solved...
Yes, it was Trusteer Endpoint Protection - otherwise known as report - Nat West Bank customers and highly recommended by them who was at fault. Turn it off solved it... Maybe I'll look to see if IBM highlighted in an updated version.
Once again thanks a lot...
-
BlackBerry smartphones double letters when you type
Hello
My phone (BOLD 9700) started to double my letters, it's boring. Any help?
So I type an and get aa or aaa, I fed up
Thank you
Vicki
This problem usually comes from the flattening of contacts tiny keyboard metal inside or corrosion from moisture. It is probably time to replace the unit.
-
Very unusual behavior of Satellite L750D-14R
One of my kids has a portable Satellite L750D-14R and a couple of weeks complained that the laptop was slow. It * was * slow - it took 10 to 15 actual minutes just to load of minecraft, and then the game was unplayable because it was so slow. He already had 6 GB of RAM. To try to fix it, I reinstalled Windows 8 (when we bought, it came with windows 7 and I upgraded to 8.1 Windows), all system updates and the windows update 8.1.
He seemed to be okay, at this point, faster. But he began to blue screen regularly, as every time it has been used. I tried to reinstall another, this time by installing Windows 8.1 directly. I made all the system updates etc and he began to blue screen. At that time, I had already spent a lot of time trying to fix it. This time, I went for the nuclear option full-on and completely formatted the disk including the removal of all partitions. There are 3 partitions, a very small recovery partition and the system partition and data. I thought I wouldn't need recovery - if there were any problems I could format and reinstall again. So I amazed all the scores and grouped into a single partition on the disk.
The laptop is now completely unusable. With the HDD Toshiba original (freshly formatted) installed the laptop starts just directly to a blue screen that says:
"Recovery, your PC needs to be repaired. The application or the operating system could not be loaded because a required file is missing or contains errors. File: \WINDOWS\System32\winload.exe
Error code: 0xc000000fYou will need to use the tools of recovery on your installation media. If you do not have the installation media contact your system administrator to the manufacturer.
Press ENTER to try again
Press F8 for startup parameters.Pressing enter or F8 is simply the screen flashes for less than a second, then it goes back to the same message again. It tries to start, it shows not the BIOS or normal startup messages, or the Toshiba logo or anything like that.
With a drive HARD new, freshly formatted, the laptop does nothing when I turn it on - entirely black screen with a cursor flashing at the top left of the screen. It does not boot to the BIOS, there is no system messages or logos, I can't type in the location of the cursor, it is just flashing indefinitely.
It's as if there was something on the "valorisation" partition which stops users to upgrade the HARD drive or something - any player who does not have this 'special' recovery partition do not work, thus ensuring that consumers buy a new laptop when it grinds to stop instead of the upgrade. This may sound cynical, but I saw anti-mise at material level similar solutions in the past - Compaq PC used to have special notches plastic cast on optical drives, so that readers could be used in the frame of Compaq.
Just to put things in context, I'm not a computer expert, qualified or not, or whatever it is, * but * I was an engineer office support for a very large company for a long time, a few years ago. I have built, repaired and updated hundreds of computers over a period of about 20 years, and in all this time, I've never seen a problem like this. What I mean is, I'm not a total computer novice! Usually a full format and reinstall everything except material patches broke, and it does not feel like a broken hardware problem.
The laptop is 1 to 2 years. I'm sure laptops should last longer than that. I really don't want it's bin again. Is there something I can do? I can recreate this special anti-mise to partition somehow level?
With a drive HARD new, freshly formatted, the laptop does nothing when I turn it on - entirely black screen with a cursor flashing at the top left of the screen
The cursor blinking in the upper left corner is a typical sign of HARD drive / partition problems or memory problem.
But HARD DISK must be check at the first stage.According to your message, you could reinstall Win 8 on this HARD drive...
I recommend you install Windows system once more after the HARD drive has been formatted.
The best choice would be the use of the support of recovery Toshiba (disk) which allows you to reset the phone to factory settings, but I guess that you have not created this record in the past. Right?Well, if you need this disk, you can always order the middle of Toshiba Arvato serice.
More I would recommend checking the HARD drive using some 3rd party software such as
Drive Fitness Test (google for free download)As mentioned, next to the potential problem of HARD drive, the RAM might be the troublemaker...
Then you should also consider the RAM check or replacement of RAM... -
Re: Satellite A60-106 - deleting characters when you type
Hi, hoping someone here can help me...
Toshiba Satellite A60 106 running Windows XP missing characters when I type. If I type very slowly every key works fine. Many letters are removed to normal typing speed. This happens in all applications and does not load. The key repeat rate is also slower that we should (I know how to define it, the problem is not with the setting but with the fact that the setting is not honored or recognized correctly).
Virus/spyware scanner reports clean. The problem started all of a sudden for no apparent reason and does not seem to be associated with any hardware or software changes. Tried to start in safe mode, try to disable all non-essential progams services started via msconfg but to no avail. problem still there.
Laptop has historically suffered badly from overheating, but this problem is not related of course it's the same thing that the machine is hot or cold.
Any ideas?
Have you installed drivers for a keyboard or an external mouse? (for example, Logitech or Microsoft)
If you boot into MSDOS, it always falls of characters? You can download a boot BACK on www.bootdisk.com disk
What BIOS version? You have the latest version?
-
Re: Satellite L750D-14R - I can't play any game/bad screen resolution
Hello
I used TOSHIBA Satellite L750D-14R but yesterday when I install win7 to a problem all breaks.
My chart of the computer looking for very bad. Now I get better service. I can, t play any game and my video resulation is mediocre. My rating of computer graphics is 1.I have no driver cd. How can I slove this problem? Which driver now I need?
I am using windows 7 64 bit
Please help me.
Right display driver is installed on your laptop?
Are you using the original pre-installed OS that you got with your laptop?
Maybe you are looking for
-
Search took over my home page and the search page.I understand that it is a malicious virus that is designed to send a lot of adds invade the PC and check out personal details. I accidentally installed this while working on wordpress.I have received
-
Upward at the top where you put in the web site that you are looking so that it stores. I double click on the yellow star and it gives me an option to remove this site. However I can't do something just because it is not delete it.
-
p6608f: driver Realtek PCIe GBE Family Controller required
I recently updated my HP p6608f for Windows 10 desktop computer. I have a few question that report in the adapter Ethernet. In Device Manager, it is identified as Realtek PCIe GBE Family Controller. I would like to download the latest driver for i
-
Is it possible to connect with FACEBOOK Customer / Tech Support? I got my FB ID stolen and I can't connect with a living soul! I'm really tired of FACEBOOK and ZUCKERBERG, boasts getting its 1 billionth Member, meanwhile, its members have problems wi
-
Generating function independent of sweep with 8648 has using GPIB
Hello I use a generator of signals (HP 8648 A) with GPIB compatibility. Currently I have worm LabVIEW 6.1 and have established their basic control with reading of GPIB, LabVIEW and write functions. What I want to do is to generate an AM signal that c