Satellite P300 - HD 3650 watch the screen when active

Hello. Thanks to anyone with additional ideas on how to solve this problem.

When the HD3650 graphics card is enabled on my new (bought yesterday) satellite screen is dead. As in, no power at all. Even when I plug in an external monitor. It works in safe mode with VGA however.

I took the following measures:

1. reboot with no battery as it is said in the FAQ.
2. set power-> CPU options minimum power in the form of 5% to 100%
3 disable the adapter 3650 in safe mode so that I can start the computer normally. Applied BIOS update 3.4, Chipset and GFX all drivers updated. No effect.

So apart from the usual lack of updates of software and the driver I can't seem to get the GFX card to work.

Are there other config adjustments or updates that I should try?

Thanks again.

Hello!

For me, this looks like a hardware malfunction.

In your case I bring the laptop to the computer dealer and request a new. Or contact you nearest authorized service provider. Technicians can check your laptop and fix it.

I assume you are using the settings of factory and you don t have your own version of Windows or a display driver that is not Toshiba?

Good bye

Tags: Toshiba

Similar Questions

  • Satellite P300 - randomly turns off the power when connected to the external monitor

    Hello

    I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

    Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

    I think it has something to do with the LED screen because my computer was never off his own.

    Hello

    So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

    If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    You close the lid if you have connected the external monitor?
    What operating system do you use?

    In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

    Good bye

  • Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

    Hey,.

    Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
    It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

    This isn't a big problem, but it is annoying that I can not sort.
    I tried to run a check of problem to find a solution, but he says that he can not find a.

    Help, please
    Thank you.

    Hello!

    Can you please explain what you mean with refresh? And what exactly is happening?

    It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

    In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

    Good bye

  • Satellite P200 - 14: nothing on the screen when the power

    Hello

    I have Satellite P200 - 14 h, and a few days ago I started having a problem power on my lap.
    I press the power button / stop, all three LEDs light up, battery, power supply and the first that shows that the adapter is plugged.

    Now my problem is that the Satellite txt is not lit, and nothing indicated on my screen.
    It's the mouth vent, black, on the bottom of the laptop, spin for a couple of times, and they stop

    Does anyone know how to fix this
    Thanks to 1 million...

    Sounds like a serious problem of material.
    Please don t understand me wrong. This is only my personal opinion... If you want to know exactly what's wrong and then the laptop must be controlled by an ASP.

    But try this first before you contact the ASP.
    Remove the battery and unplug the AC adapter
    Wait about 30 minutes and then reconnect the two parts.

    Try turning on the laptop computer.
    If that does not help, ASP is your next step

  • Get blackheads on the screen when it is on some websites, slow stutter sometimes when viewing pictures etc.

    Hello I'm going to have some weird problems with my Mozilla firefox to the end, getting black dots on the screen when on websites, as a DS "http://www.komplett.se/k/ki.aspx?sku=635503" when I click on the image of the screen and stay there by clicking on back I have blackheads after like 10 click on max.

    http://I39.Tinypic.com/2dnion.jpg

    Often and is very enoying overall, I use firefox for years and love it, but at the moment I have to use Chrome to get stuff to work. It is above all this shit with blackheads. Another thing that was my Battlelog didn't show my hollow friends online but firefox which solved I think with reinstall it (done a reinstall and formatted the computer but the problem with the points is still there).

    I installed Java again and tried most things like disable the hardware accelerator but I always get the question, I thought it was my new graphics card but I had no such problems the first day (R9 280 X ASUS). I think it was the next day or 2 days after I upgraded to 8.1 pro (since then reinstalled as said to get pure), and I had these points.

    I almost sent my card back to the seller, but such that she feels right now its something with Mozilla Firefox because it happens that he (not in IE or Chrome) and never in the game in any game so far. Help!

    Try disabling hardware acceleration in Firefox.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.

    If what happens after installing a new graphic display card while there might be a problem with this graphics card or with the drivers.

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

  • Why firefox takes up half of the screen when I go on a website

    my homepage takes up half the screen when I go to any Web site, the site is located on the left side of the screen. I want an entire page of the site hope someone can help

    The 'left side' is probably the sidebar, and I'm assuming you open these sites to bookmark that you saved.

    Right-click on the bookmark and select Properties, then turn off the preference for the load this bookmark in the sidebar, and then click Save.

    Buttons using JavaScript on web pages for "Bookmark this Page" causes this preference to select saving the bookmark in this way. Therefore, do not use these buttons, use the function 'Bookmark this Page' which is integrated with Firefox instead.

  • Flash of the screen when a call arrives?

    It's a great phone. He does everything except tell me when someone calls. Im a hearing impairment and such when cant its sounds. Is there a way to make the strobe of the screen when a call by entering?

    It is not possible by default and I'm not aware of all the apps that do this.

    When a call arrives on the screen should turn on but not Flash.

    Connected by T-Mobile.

    Sep 27, 2010 12:21 AM, "wardo56".

  • Dead zones of the screen when I write

    I get the dead zones of the screen when I write. They are not always in the same area of the screen, but go across the width.
    Everyone knows this and they found how to solve the problem?

    Hello

    It's not easy to say what can be the problem.
    Well, first of all, I would recommend to recover the OS with the recovery CD. If after this procedure, the problem persists then you should try to update the display driver. If this doesn't help, so I guess that it s something wrong with the hardware. In this case, you should ask for help ASP.

    Good bye

  • Turn off the bookmarks bar bulging feature automatically on the left side of the screen when you move the pointer to the left

    It's bothers me a lot, because I'm used to move the pointer to the left of the screen when I don't want to see it. Now, it increases the Favorites bar, which was not my intention. I checked all the options, but I couldn't turn it off. Maybe you can change to the code level?

    Thanks in advance!

    Sadowskim,

    Cancel Safari, bookmarks/favorites bar appears on the left side, if the cursor of the mouse is on the left. This link addresses the problem you describe.

    I suggest that you provide Safari comments describing your need for a user option.

  • How always show left column on the screen, when I scroll to the right of a large spreadsheet

    How always show left column on the screen, when I scroll to the right of a large spreadsheet

    If the left column is a column header, you can check freeze header columns in the table menu.

    Better not to use TOO many columns.  Numbers works best with relatively little.

    SG

  • Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

    The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

    Next time please indicate what opersting system you first use before describe you your problem.

    You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    If for some reason it does not restore the Volume icon, then...

    For Vista, use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

    2. for the Volume icon

    To activate the Volume - icon Enable_Volume.reg< click="" to="">
    Then, follow the instructions from #5 to #9.
    Make sure that you restart the computer to complete the process.

    For Windows 7, use this tutorial:
    http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

    Go directly to the Option two

    9. to activate the Volume icon

    (A) click on the download button below to download the file below.

    Enable_Volume_Notification_Icon.reg

    then follow the instructions from #11 to #15.

    Make sure that you restart the computer to complete the process.

  • I get an error code of 1311 with Windows Installer to appear on the screen when I try to navigate.

    the Windows Installer

    Presentation of adobe acrobat 7.0

    Error 1311. Word of source file found

    c:\Program files \adobe\acrobat 7.0\ configuration files\acropro\enu\data 1.cab. Check that the file exists and that you can access.

    Original title: Error 1311, windows installer appears on the screen, when I Browse.

    Hi-mountain dew,

    Thanks for posting your query in the Microsoft Community. It seems that you have a problem with Windows Installer pop up on the screen while browsing. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

    We start with a few questions-

    (1) do you get this pop-up when you navigate to a specific Web site?

    (2) you are trying to install Adobe Acrobat 7?

    (3) have you made changes on the computer before the show?

    I would like more information about the issue.

    Method-

    I would have you see the article from the adobe website as he talks about the Error 1311-

    Error 1311, 1335, or 2350 "... not found Source file data1.cab ' | Install Adobe products | Windows

    http://helpx.Adobe.com/Creative-Suite/KB/install-Error-1311-1335-or.html

    We know if you need help. We will be happy to help you.

    Thank you.

  • I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it.

    I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it. I know you can do induvdually but I was wondering if there was a way to select all and then make the longer time for each of them. Help, please!

    original title: NEED HELP Please REPLY as soon as POSSIBLE. Windows movie maker question

    Hello

    My friend John Papa - MVP - is the expert on Windows Movie Maker.

    PapaJohn.org
    http://Papajohn.org/

    PapaJohn - online tutorials
    http://www.Papajohn.org/mm2-online-tutorials.html

    Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
    main screen.
    http://www.windowsmoviemakers.NET/tutorials/

    Windows Live Movie Maker help & how-to and Forums are good sources of information:

    Windows Essential - Movie Maker help
    http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

    Answers - Windows Essentials - Microsoft Windows Movie Maker Forums
    http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=threads
    ====================

    These might help:

    Getting started with Windows Movie Maker

    Import video, photos and audio on Windows Movie Maker

    Import video from a videotape

    Get a movie in Windows Movie Maker

    Make a movie quickly in Windows Movie Maker (AutoMovie)

    Publish a movie in Windows Movie Maker

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My toolbar was at the bottom and is not on the right side of the screen when I turned on the PC. How do come back on the bottom?

    How do you reposisition the toolbar background down

    Wednesday, June 13, 2012 19:45:28 + 0000, BJWoodham wrote:

    My tool bar downstairs was on the right side of the screen when I turned on the PC this morning. How do come back on the bottom?

    You say "toolbar." Do you mean the taskbar?

    Although by default, the taskbar is displayed on the bottom of the screen,
    It can be on any of the sides on what you prefer. To move any
    side to side, simply click an unused portion and drag
    where you want it. Don't forget to click inside it, not on the edge.
    by clicking on the edge and dragging will resize not move.

    If it does not move, it can be locked. In this case, right click on it
    and uncheck "Lock the taskbar", then try again.

    Moreover, with the screen monitors wide today, I prefer the taskbar
    on the left or the right of the screen. I think that allows a better
    use of real estate than have it at the bottom of screen.
    Ken Blake, Microsoft MVP

  • The volume and brightness display showing is not on the screen when I change the volume or brightness

    Hi all

    My laptop used to display the controls volume and brightness on the screen when I would try to change. A few weeks ago, he stopped, and I'm just trying to understand how to solve this problem?

    Hello

    In this case, uninstall the current version, restart and then reinstall HP Quick Launch Buttons (1e) and SmartMenu again.

    Reboot after that.

    Regads,

    DP - K

Maybe you are looking for