Satellite P300 - keyboard going crazy

Hello!

I have a Satellite P300, and my motherboard broke out weeks.
I picked it back this morning, but since the repair, I have a little problem:

The keyboard has a numeric keypad, separate, which can turn with the NumLock key.
When the num lock is activated (green LED on), by pressing the keyboard give me number; but part of my alphabetical keyboard also gives me number (keys: u, i, o, p, j, k, l, m,...).
This part of the keyboard is supposed to be a keyboard that can be switched on with the Fn key.
As long as I have not any combination of keys + Fn, I can't turn this off.
The only way for me to use my keyboard is to turn it on when I need it and off right after I used it...

Does anyone have a solution?
Thank you

Please don't do anything alone, but contact service again and explain the situation.
They MUST check the functionality and give you work well for laptop.
I assume that they made a mistake. Maybe wrong BIOS or something.

You can't do anything. Contact them again.

Tags: Toshiba

Similar Questions

  • How to replace the keyboard on Satellite P300 - 20H

    Hello!

    I just bought a replacemant for my Toshiba Satellite P300 - 20H keyboard and I was wondering how to actually replace it?

    Any response would be greatly apreciated,

    Thank you, Sophie x

    Video on [http://www.youtube.com/watch?v=UQaBRJoH-M0] (2mins in) you "lever" off the coast of the plastic band that runs across the top of the keyboard and remove the 2 screws. I expect that the connector of the ribbon cable must be of the type where a hinged band (diff color to the body of the connector) holds the cable in place. It appears if the cable is fired and you push it when the cable is inserted. There is normally a line on the cable to show that you have completely inserted the cable and the cable is inserted instead. -Examine the original cable until you remove

  • Satellite P300 - changed keyboard

    Well, I'm running a Toshiba Satellite P300 and I'm having the problem.

    I just returned it to repair and they changed the motherboard. I've updated the BIOS. I did a clean installation of the operating system to Windows 7 which. I don't have this problem before he went out for repair but now when I press the Num Lock key, it becomes my keypad numbers, as expected, but also modifies the right side of my keyboard to numbers together which is very frustrating.

    I've been surfing for 2 days online find a solution to it and has even called the tech who was in charge of the repair and no one has all the answers for me.

    And another problem after repair: without the model name, part number and Serial Nr
    [PC information | http://forums.computers.toshiba-europe.com/forums/]
    Model name * yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
    * Part number * yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
    No number of * Serial *.
    Version of the OS Microsoft Windows 7 Ultimate 6.1.7600
    Version of the BIOS V3.30
    Processor AMD Turion (TM) X 2 Dual-Core Mobile RM-70
    Physical memory 4096 MB RAM
    449,892,560,896 of hard drive capacity [byte | http://forums.computers.toshiba-europe.com/forums/] 418.995 [GB | http://forums.computers.toshiba-europe.com/forums/]
    Drive hard free space capacity 147,790,635,008 [byte | http://forums.computers.toshiba-europe.com/forums/] 137.641 [GB | http://forums.computers.toshiba-europe.com/forums/]
    Video ATI Mobility Radeon HD 3650 version = 8.634.1.0
    Screen resolution 1440 x 900 Pixels
    Color quality, true color (32 bit)
    Audio version of high definition Audio Device = 6.1.7600.16385
    High definition Audio Device version = 6.1.7600.16385
    Atheros AR9281 Wireless Network Adapter network = 8.0.0.325 version = 00:21:63:61:13:EC MAC address
    Modem HDAUDIO Soft Data Fax Modem with SmartCP version = 7.68.0.50
    Internet Explorer 8.0.7600.16385
    IDE device TOSHIBA MK2552GSX ATA Device
    DRM ENGD67O5IR85 SCSI CdRom Device Firmware = 3.5Z
    HL-DT-ST DVDRAM GSA - T50N ATA Device Firmware = RT03

    Hello

    In your case I remove the keyboard from the Device Manager and reboot the laptop. After that Windows recognizes the keyboard again and install it. It happens automatically.

    Also, make sure the keyboard language in Windows.

  • Re: Satellite P300-156: keyboard freezes touch touchpad - mic is not w

    Hello

    I installed Windows 8 on my satellite P300-156 and now I have a big problem.
    My keyboard crashes when you touch the touch pad. In addition, the microphone does not work when the Windows Device Manager indicates that it is ok.

    There is no windows driver for this laptop 8...

    There are no drivers for the laptop because it isn't win 8 supported series.
    But even if there is no Win 8 drivers, the system should not freeze affecting the touchpad module.

    However, the Synaptics touchpad driver for Win 7 or 8 to win can be downloaded from Synaptics page.
    Recommend check it out!

  • Satellite P300 - one key works is not on the keyboard

    Hi all

    Someone has a proposed solution to fix a key works is not on my laptop? A letter on my keyboard 'letter b' has stopped working.
    Is the laptop Satellite P300 - "PSPCA-01U013.

    Thanks :)

    Hello

    Maybe there is no contact this button.
    As far as I know, you can not solve simple buttons. You can remove the key caps but I put that this problem is related to the plug defective or similar then it seems that you need to replace the keyboard.
    Keyboard can be ordered from Toshiba ASP in your country. If you have no experience in the replacement of parts, then I recommend asking a support technician.

    Good luck

  • Satellite P300 - overlay of pavement digital full keyboard

    Hello

    I have a PSPC4E Satellite P300 - 13M.

    As you may know, this laptop has a numeric keypad on the right side. Since I'll be back the laptop Toshiba, where they replaced the motherboard, i, o, p, k, l, m keys, behave as if they were layering digital for laptops with keyboards smaller, whenever the number lock is enabled.

    So, either disable NumLock, but then I can't use the numpad brilliant sideways, or I turn it on, but then I can't type i, o, p, k, l, m.

    I found on the internet that Fn + F11 turns the digital overlay, but in my case it turns off just numlock, so the problem of the overlay is fixed, but the keys on the numeric keypad do not give numbers of course :)

    The bios is updated. and the problem is definitely not the windows driver, because when I put in a linux liveCD, the problem is still there.

    Does anyone have advice?

    Someone else has had this problem, I think that they need to return the laptop to the Service Center and get the updated system information. If I remember correctly, they need to change the size of 17 "screen with a special Toshiba utility.

  • Satellite P300-05 x - keyboard is loose at the top right

    Hello

    I have a new Satellite P300-05 x and the keyboard is loose at the top right mainly between the 5 keys and the return key back.
    It's very annoying and he clicks on / noise when it moves up and down when I type...

    I'm sure its nothing to worry about but very annoying with a new laptop

    Someone at - it experianced cela and is this a simple fix?

    Thank you

    Dave

    Hello

    I didn t notice something like that on my laptop satellite but if you think that it s a really annoying issue then contact the ASP for control of the keyboard and the keyboard if necessary replacement.

    Good bye

  • Satellite P300 - 271 - how to replace the keyboard?

    Hello
    I have a Satellite P300 - 271 and there are a few damaged keys. I bought a new keyboard for this laptop.

    Is there a caraa how do I replace the keyboard?

    Greets, Benjamin

    Hi Benjamin,

    As far as I know that these manuals are not for the public. Technicians certified for laptop only can download these manuals. You can download the normal user manual that came with your laptop.

    A friend told me to replace the keyboard to remove the keyboard first, support but it s fixed by screws on the underside. After that, you can remove the keyboard but be careful with the cable.

    Disassembly of the laptop is a little tricky. If you n t have experience with that you should ask a technician for laptop help.

  • Satellite P300 - is there a keyboard backlight?

    Hi - did anyone know whether Satellite P300 has a back light for the keyboard? I suppose that it is that the keys are black but can't for the life of me how to turn it on. Any help is appreciated.

    As far as I know bright keyboard will be offered with the new series of laptop A500 and P500.
    I'm 100% sure that satellite P300 doesn't have this keyboard.

    You can check the specifications of the models of different satellite Satellite pro P300 and you will see that is mentioned nowhere this keyboard.

  • PB with keyboard (NumLock) Satellite P300

    I have a satellite P300, and my keyboard does not work normally when I lock numlock in order to write the numbers (1, 2, 3...). In all cases (press 'NumLock' locked or not) I can't seem to write the numbers with the keyboard. When the green light is on it nothing happens when I press a key on the keyboard, when the light is off it works normally, I mean it's like the arrows.
    Maybe someone can help me.
    Thank you.

    I agree with kody seems that only the authorized service partner can solve this problem that is boring and strange with the keyboard
    As far as I know something needs to be updated in the DMI

    DMI is stored on the system board, and it contains different information about the machine.

    Good bye

  • Cannot start from the CD in my Satellite P300-23F

    Hello

    I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

    When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

    I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

    No idea what's going on? Is it possible to make it work?

    Stand by.
    When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
    When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

    Maybe you can use the CD but not DVD. check it out please.

  • Satellite P300 with XP hangs at the screen "starting windows."

    I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

    When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

    Thank you

    > There was an ASP.NET account, and he disappeared after the update of the BIOS
    The whole story is really strange

    I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
    Then install all service packs, hotfixes and patches of the XP!

    Simply show words on XP on P300.
    A friend of mine has installed XP on a P300 yesterday too and the XP works well
    Everything works fine!

  • Satellite P300-172 - you can upgrade to Windows 7?

    Hello

    so I got my Satellite P300-172 for a while now, Windows Vista has always done my head in, and now I think THAT my warranty ran out, I feel its time to upgrade to Windows 7, the other reason im trying to improve because vista is unable to search for updates guard saying: an error occurred when the new updates for your computer Code 80072EFD

    Can some give me advice in weather im going to be better that the upgrade to Windows 7 or do a detail clean installation of it please?

    Hello

    Personally, I prefer to do a clean install any kind of upgrade. If you decide to do an install of Windows 7, look for drivers on the Toshiba driver page.

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  • Re: Satellite P300 PSPCCE - wakes up to the top by itself

    My Satellite P300 pspcce starts to turn more * on * after I manually dump it * off *.
    This happends in the minute following the judgment.

    I started noticing this after that I installed my wireless card, I turned the wake on lan/wlan function * off * in the Bios. But it does not help...

    Before installation of the Wlan card the computer woke up from his sleep too, but not when it was closed.

    I looked in properties of the Wlan card but I couldn't find any wake-up function.

    Any ideas where to look next?

    Hello

    As far as I know THAT BIOS includes more options wake up; so I also recommend disabling these options
    Wake on keyboard
    -Battery clock criticism
    - and Wake-up on LAN (but it seems that you have already disabled)

    In addition, the LAN card support a wake on LAN function in the own properties.
    You should check this in the Device Manager-> properties-> Advanced tab LAN card.

    Also, I read that it automatically updates windows could wake the portable computer too. Try to disable the receipt of the update and check if it would improve your situation.

  • Satellite P300-156 - and the button Return give the same values

    Hello

    I have a satellite P300-156, and it has a numeric keypad.
    I have problems because the Enter key and the Return key give the same values. I believe that it is incorrect.
    Can anyone help.

    Key on the numeric keypad should give an input it does.
    the Enter key on the main keyboard should give a carriage return value, but it gives an input value.

    Usually this does not cause a problem, but with software like photo shop that makes the distinction between a carriage return and a hard fall it does not work.

    Can someone help me please

    Thank you

    Hello

    To my eyes the entry and return keys are the same keys that provides the same functionality.
    I really put t know why you believe that there is something not right

    By the way; Check if you are using the latest version of the BIOS!

Maybe you are looking for