Create a unique standalone program that requires no Labview

Similar Questions

• W7 x 64 SP1 programs that require admin access stop responding

  PC G560

  Windows7 64 bit with SP1 (happened before SP1)

  Hello

  When logged in as a user if I click on anything that requires administrator privileges, the box is to enter the admin password, it does not matter if I get the password or if I click Cancel the program crashes then with the circle icon turns when I hover over the program. CTRL ALT + DEL and close the program is not responding, and everything is OK again.

  Any suggestions please

  Note of the moderator; subject published

  Resolved without a full installation. Thanks to a bad other sole on this forum.

  I searched through the pages of research and the most common problem was with Lenovo PC or some applications, to say that Lenovo have such a small market share, but so many problems is really boring. a search of Yahoo drew back me on this forum, uninstall Veriface has solved the problem, which is a shame because I really liked the face recognition as the laptop is used by the whole family.

  So far Lenovo have not impressed me-Wireless N is almost a fraudulent claim, low autonomy, constant nitpicking like this just resolved, only real support is that this society support forum is crap. Touchpad is also evil.

  An offcast from IBM which I rate highly is poor.

  In any case, I hope this helps others out there.

• Can not run programs that require an internet connection

  My computer has been acting weird lately. I use the Zune marketplace and Playon for my PS3 and everytime I try to login or use programs that they say that they cannot connect to the server, or the bandwidth is low, even if I get 3mps. Even when I try to download templates for Microsoft word in the program or try to access my itunes store. I tried all the troubleshooting various tech support people have come to me as allowing programs on my AVG, disable my firewall, etc and even get rid of it completely but not luck. I can use internet very well and that you have run all the antivirus programs, spyware and malware, I and as usual everything comes out clean. I use a 2wire modem/router with AT & T DSL and I restarted and reset the unit. My wife can do it all on his laptop computer so computer m. My computer did something weird to the other day, he could get on the internet but then I got rid of my proxy and still, it was nice but my programs don't always work. I also called my ISP and there is nothing wrong with the line, but when I use the AT & T self support tool that it says that there is a problem with my connection even if he does not show it on their end. It is also said that my line, DSL and Ethernet status is down all what that means.
  I am running windows Vista 64 on a HP Pavilion m9340f.
  I'm OK with computers, but not great, and'd appreciate any help there ' All can give.

  Thank you!

  PS is there a good trustworthy program that I can download to search and solve problems like those that might help? I have Glary Utilities but that did not work...

  I feel like such a decoration, I disabled the proxy in firefox, but totally forgot to do in Internet Explorer. Thank you very much, everything works again.

• Errors of installation of programs that require administrator privileges - ON a user administrator account

  I don't necessarily get coverage error messages (and in some cases I don't get any other error message that the computer tells me an error has occurred), but when I try to install/load of programs that are based on the internet (Viewer gotomypc, photo uploader facebook, other programs uploader, etc.) I can not install the program, unless I have save the file on my computer then right click on the file and select "Run as Administrator" When my user account is the main account on my PC.

  My account shows that it is an admin acocunt, so it's not as if this has been changed.

  I can't pin-point when this started to happen, but it lasts for quite awhile - maybe since the latest service pack installed...?

  This is the normal way to solve any problems with the installation of programs > download/save to the desktop > right - click > run as admin.

  It's updated operating system Vista, upgraded installation and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• How to create a sign in sheet that requires several different signatures but sent to an address

  I have tried to create a sign in sheet in MS Pro, which requires that each Member of a crew of job site to sign

  The form is sent to each crew only foreman.

  The question I have, is that once the form is signed by the participant 1 name of people

  and signing is filled in each line of the form. How to edit the form so that it does not automatically

  fill?

  The shape of different domain names.

• Try to install a program that requires to be run as an administrator.

  I think that I am the administrator and it still does not work.  How to recognize me as an administrator. I have only one account and it says administrator under him. I tried the command run as when I click on the .exe file that I downloaded.

  Forgive me of repitition.
  You said you tried...

  A click with the right button on the exe > clicked run as administrator > and then right click on the exe again, and he ran?

• is it ok to remove the most recent version of the redistributable file in VC ++ in order to install a program that requires an older version?

  I have a file in VC ++ 2010 version Re distributable 10.0.40219. One of the programs will install vcredist_86.exe and he is unable to do so because I have a newer file. What is the solution?

  Have you tried installing via a right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view, navigate to the mentioned location of Temp or to see all the files in there...

  As has been said it is not uncommon to have several versions of VC ++ installed.  If you want you can uninstall them and reinstall them as should be.

• All my programs that require an internet connection give me a connection error message to the server, restart and try again, or an internet connection is required.

  Hello

  Step 1: Verify the user account control settings.

  See: http://windows.microsoft.com/en-US/windows-vista/How-do-I-change-the-behavior-of-the-User-Account-Control-message

  Step 2: Also check the Windows Firewall settings. Here is a link to an overview of database firewall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-Windows-Firewall-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  what I have to change?

• Program install problem that requires a 64-bit operating system.

  I can't install a program that requires that my computer is 64-bit.  I get an error message that says that it is not a 64 bit system.  When I look at my CPU information, he said that it is an AMD Athlon 64 X 2 Dual Core Processor 3800 +.  What gives here?  I'm edition XP SP3 Windows Media rumming.  There I'm missing something, but don't know what to look for.  Thanks for any help.  Frankycpu

  Monday, January 24, 2011, 19:30:18 + 0000, frankycpu wrote:

  I can't install a program that requires that my computer is 64-bit.

  No, you are not understanding what say you. It does not require
  your computer 64-bit, it requires your version of Windows to
  be 64-bit.

  I get an error message that says that it is not a 64 bit system.  When I look at my CPU information, he said that it is an AMD Athlon 64 X 2 Dual Core Processor 3800 +.  What gives here?  I'm edition XP SP3 Windows Media rumming.  There I'm missing something, but don't know what to look for.  Thanks for any help.  Frankycpu

  Your hardware is capable of running 64-bit Windows, but you
  running 32-bit Windows on it.

  Ken Blake (MS-MVP)

• internal microphone does not work and cannot use a voice recording or Skype or any program that needs a mic

  Original title: his record game

  My internal microphone does not have all said that it is perfect, but I can't use Skype, a voice recording or any program that requires a microphone, so it seems that if my computer doesn´t have a microphone and I should have a digital array microphone. I have a hp pavilion dv7 beats edition

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) do you remember making the last changes made to the computer before this problem?

  You can try the following methods and check if it helps.
  Note: The following troubleshooting methods apply for the Windows 7 operating system.

  Method 1: Run of recording Audio troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  (a) click the Start button, type "MMSYS.» CPL"(sans les guillemets) in the area start search, and then press ENTER."

  (b) on the read tab, click on the speaker, is currently being used and click the Properties button.

  (c) switch to the tab Advanced ; Uncheck the option "allow applications to take exclusive instrument control."

  (d) if the enhancements tab is available, click it. Check "disable all sound effects'.»»

  (e) in the settings section, select none.

  (f) click apply , and then click OK.

  Method 3: Set the default Microphone
  Exercise the functions mentioned below to adjust the Microphone as default:
  a. go to Start and click on Control Panel .
  b. click on her, then a new window will open.
  (c) in the new window click on the recording tab. Right-click in the window and click Show Disabled devices.
  d. now check if the Microphone is listed there. Right-click on it and choose Activate.
  e. Select Microphone and click "set as default"

  Method 4: Update sound card drivers
  Try to update the latest drivers for your sound card and check if the problem persists.

  Please see this article for more information on the update of drivers. http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

  For additional help, you can consult the following articles:

  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

   

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

• Cannot run a standalone program in Win 7 64 bit

  I have a standalone program that was running fine on XP 32-bit, but does not work on my Win 7 Home premium 64-bit. Compatibility does not work, hold mode only, is not part of windows. If I upgrade to Windows 7 Professional, or upgrade and download virtual XP my program will work? Other with Win 7 64-bit can run this program without problem. Or is it my HP? someone told me that I have a version limited to 64-bit?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  Some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657

  32-bit and 64-bit Windows: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Help with Windows 7 compatibility issues
  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  Windows Anytime Upgrade: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

• Any program that you are trying to run requires .exe

  Original title: be able to use the programs!

  Rundell 32exe.doesn't work. What I'm trying to do requires .exe.
  An opensto box asking me to choose what kind of program I want to use to open
  (any program). I make a choice. A window opens Amyuni Doc Converter.
  I can't go any further.

  Hi LaurieDiestler,

  1. When did you start to question?

  2. did you of recent changes to the computer?

  Step 1:

  You can check out the article below and run the fix it tool available and check if the problem.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  For more information, you can also consult the following link:

  Change the programs that Windows uses by default

  Step 2:

  You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Can I create a theme or office that will also allow to save files and programs open?

  I use Win 7 64 bit

  I know how to create a theme in Windows that includes the background, sounds, mouse pointers, screen saver etc, - the usual theme settings. But I wonder if there is a way to create a framework of office personalized with your current open files and programs. I have set up my desktop for including Sony Vegas video editing and audio and video encoders-muxeurs and set-top boxes. I also created a specific model of open cases. Ultimately, what I want to do is just to save open files and programs for a parameter I could access with one click later and light up, (or a login name). Then he would automatically come to the office with all the relevant files and programs open. Is this possible in Windows 7?

  Thank you

  Shawn "Cmdr" Keene [MVP]

  Some weird results

  Initially, I used your method of single line, since the first example you gave, to try to open programs. It would open a single program and then hang. If I closed this program it will open the next and hang.  If I closed it program would open the next and hang, etc. - it only opened one at a time.

  Then I used the cd "method of C:\Pathname and got the same results: open and hang, close, open and crash, close, etc..".

  Then in the first entry

  REM MKVExtractGUI2
  CD /d "C:\Program Files\MKVToolNix".

  I've added the /d and everything as it should - programs and files open. That's why I stuck as the final.

  Using your method to explore start/wait worked if I used it in the form of lots to open folders only - no program.

  Try it with the:

  : MKVExtractGUI2
  Start "C:\Program Files\MKVToolNix\MKVExtractGUI2.exe".

  method would open six control boxes that all had the directory where I started the batch of files of

  so:

  F:\My Documents\Desktop Vid settings of batch files

  With the help of your:

  Start the Explorer c:\users\shawn\desktop\1
  ping google.com/n 1

  method also worked if I used it in the form of lots to open folders only - no program.

  Try it with the:

  : MKVExtractGUI2
  Start "C:\Program Files\MKVToolNix\MKVExtractGUI2.exe".

  method would also six control boxes that all had the directory where I started the batch of files of
  Once again:

  F:\My Documents\Desktop Vid settings of batch files

  So, I used which is the only one that has worked to open everything - and in the order that I wanted:

  off @echo
  : files
  Start the Explorer "G:\Sony Vegas\Sony Veg Project Files"
  ping google.com/n 1
  Start the Explorer "F:\Torrents Completed"
  ping google.com/n 1
  Start the Explorer "E:\Projects hand"
  ping google.com/n 1
  Start the Explorer "models E:\Projects.
  ping google.com/n 1
  Start the Explorer "E:\Project Films waiting for editing"
  ping google.com/n 2
  Start the Explorer "C:\Users\TIM\Desktop\Multimedia".
  Start the Explorer/Wait 'pending F:\Projects TV Series'
  REM MKVExtractGUI2
  CD /d "C:\Program Files\MKVToolNix".
  Start MKVExtractGUI2.exe
  REM MyMP4BoxGUI
  CD "C:\Program Files\My MP4Box GUI"
  Start MyMP4BoxGUI.exe
  REM AudioCoder
  CD "C:\Program Files\AudioCoder x 64"
  Start AudioCoder.exe
  VLC REM
  CD "C:\Program Files\VideoLAN\VLC".
  Start vlc.exe
  chrome rem
  CD "C:\Program Files (x 86) \Google\Chrome\Application.
  Start chrome.exe
  REM dark-color-29
  CD "C:\Users\TIM\Desktop".
  Start Black-color - 29.jpg
  output

  I had to add 'ping google.com/n 2'after launch 'E:\Project Films pending Edit' Explorer or it would still be to Exchange places with the multimedia folder. I have no idea why. But it worked and after having messed with it for a few hours now, I am satisfied. However not the elegant be!

  Thanks for your help

• How to create a Unique constraint on a column that already has duplicates. Only future duplicates should be avoided

  Hi all

  Can someone let me know how to create a Unique constraint on a column that already has duplicates. Only future duplicates must be avoided.

  Any help will be greatly appreciated.

  Best regards

  gt1942

  ALTER table Add constraint unique (column_name) may be deferred novalidate;

• is there a way that we could create a unique link that someone can click on an email to bring them to a cart to fill their quote?

  is there a way that we could create a unique link that someone can click on an email to bring them to a cart to fill their quote?

  Hello

  Here is how the configuration would work - http://client2.worldsecuresystems.com/get-quote/java-in-a-nutshell - you can add some nice CSS to ensure that the screen does not Flash or anything like that. Here's how it was built:

  1. create a new model, paste this piece of code inside:

  {tag_pagecontent}
  

  2 create a new catalog, all the products of this catalogue will redirect users directly to the GET a quote form. Assign the model created in step 1

  3 change the presentation of the latge product and place the button buy now in a hidden div:

   
  {tag_buynow}
  

  4. change the shopping basket page layout and make sure the GET a quote button is present:

  {tag_getquotebutton}
  

  5. place this code at the end. You need to replace 606879 with the ID of the catalog created in step 2

  {% if globals.get.CatalogueID == 606879 %}
  
  {% endif %}
  

  What will happen, it is like this:

  1. whenever someone opens a product using the link to the custom catalog buy it button will now be clicked
  2. the site visitor is then redirected to shopping cart layout where the other script checks the catalog, the visitors came. If this is a "known" catalog redirect another arrives and load the GET a quote layout

  Make sure that you have loaded in your models of jQuery and liquid activated on your site.

  One more thing, you need to monitor is you will need hide this catalog custom catalog your site listing.

  Hope this helps,

  Mihai