Satellite P300D - problem with reboot after update the HARD drive

Similar Questions

• The urge to Ultrabook 6 problem with recovery after failure of hard drive (out of warranty)

  Hello

  Please can someone tell me if it is true that to use HP factory recovery disks, hardware must be exactly the same as when purchased.

  After hours wasted trying to get the recovery disks to work, I find myself with the same "failed to retrieve @ screen and some unnecessary lines of code."

  In reading the various posts, it seems that I have a replacement for HP HARD drive of the same type that came with the computer. If this is the case, then the links on the support pages should say this before I have pay £39 for a set of disks.

  For me, a hard drive is a hard drive. I replaced a drive fried (1 month out of warranty expires) with a good brand replacement, but larger. Disks won't load.

  However, I could load W7 form an iso file and get that to work. I need the recovery because I do not know how to configure raid which allows the QuickStart on this laptop, and I don't have the time or no further inclination to make it work.

  Partly a rant, sorry, but I'm wrong, and is there a solution?

  Concerning

  I have seen others with this problem. Unfortunately, the only working solution, I remember the top was where a guy removed the player cache Msata, ran recovery then reinstalled.

  On a single charge of Win 7 I think you could install the Intel Quick Start software, then use it to activate the quick start. I have more a laptop Win 7 with Msata to test, but I remember the software could be opened from the icon beside the system clock and used to toggle the quick start.

• Satellite P300D 10V - how can I update the display driver?

  I have a Satellite P300D 10V and there ATI radeon hd 3xxx series display panel. I bought Starcraft 2 and there was an error message: that the display driver is outdated.

  I went on ati.com. They say I have to get the driver from Toshiba. I went to Toshiba, had the driver. When you try to install it says no components to install. I uninstalled the ati driver and tried again. The same thing.

  Now I don't have driver for the graphics card. How can I install the driver?

  Help, please!

  Hey,.

  This means that you have uninstalled the old display driver, but now, you are not able to install the latest version of Toshiba?
  Well, what OS do you have?

  Before installing the new display driver, you should decompress all the files. Then run the setup.exe file.
  If you get the same error message, try to install the driver through the Device Manager.

• Satellite M30X: Problems with external USB 2.0 HARD drive

  Hello
  I have a Toshiba Satellite M30X. I bought recently a 200 GB external hard drive. It has its own power supply. If I connect with USB 2.0 on my laptop, it happens to disconnect and reconnect leads him. Sometimes it works, so I can put data on the disc. Then again, he diconnects and reconnects repeatedly. I've tried a different USB Port, but there is no difference. It's very strange, because I plugged the external hard drive to many other computers (Laptop and Tower) and it STILL works! It is that with my cell phone, it disconnects and reconnects all the time. As I said, not always. Sometimes it works for a half an hour or two and then the action begins again...

  If anyone can help?
  Oxford Lutz

  Hello

  I put t know if this can help, but you can try to connect a USB hub with an external power supply. Then try to connect this external HARD disk to the USB hub.
  I know that it of not a exactly the solution but maybe it will help you to solve this problem of USB.

  Good bye

• Satellite P300D-12y - XP does not recognize the HARD drive

  Hello

  I want to install win xp on my new laptop.
  So I downloaded the toshiba page display driver. I use the driver sata this package to create a new installation disc.

  But the installation of win xp has not identified, my hard drive.
  Now, iam looking for the good driver-sata.
  The full package name is: ATI8.479.0.0000.zip

  Here is the content of the txtsetup.oem in the sata-file:

  ; This file installs the SiI 3112 serial ATA RAID in the framework
  ; installation text on Windows NT, Windows 2000, Windows XP,.
  ; and Windows Server 2003.
  ;
  ; Copyright (C) 2002-2003 by Silicon Image, Inc.
  ; All rights reserved

  Discs
  Disk1 = "Silicon Image SiI 3 x 12 SATALink Driver Installation Disk",\si3112.sys,\

  Default values
  SCSI = Si3112_XP

  SCSI ; Section HwComponent
  Si3112_XP = "Silicon Image SiI 3 x 12 SATALink Controller for Windows XP/Server 2003"
  Si3112_NT = "Silicon Image SiI 3 x 12 SATALink Controller for Windows NT 4.0 and 2000"

  Files.SCSI.Si3112_XP
  Driver = disk1, si3112.sys, Si3112
  INF = disk1, SI3112.inf
  ;; Catalog = disk1, Si3112.cat

  Files.SCSI.Si3112_NT
  Driver = disk1, si3112.sys, Si3112
  INF = disk1, SI3112.inf
  DLL = disk1, SilSupp.cpl
  ;; Catalog = disk1, Si3112.cat

  HardwareIds.SCSI.Si3112_XP
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_31121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_34238086', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_311215D9', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_B0021458', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_82141033', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_35121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1002 & DEV_436E & SUBSYS_436E1002', 'Si3112.

  HardwareIds.SCSI.Si3112_NT
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_31121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_34238086', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_311215D9', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_B0021458', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3112 & SUBSYS_82141033', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_35121095', 'Si3112.
  ID = 'PCI\VEN_1095 & DEV_3512 & SUBSYS_01661028', 'Si3112.
  ID = 'PCI\VEN_1002 & DEV_436E & SUBSYS_436E1002', 'Si3112.

  Config.Si3112
  value = parameters\PnpInterface, 5, REG_DWORD, 1
  value = ProblemDevices, "", REG_SZ, «»
  value = 'Maxtor 4D060H3 DAK05GK0', ProblemDevices, REG_SZ, ' "MaxMode = UDMA-5".
  value = ProblemDevices, REG_SZ, 'ST320012AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST330013AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST340017AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST360015AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, "ST380023AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3120023AS', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST340014ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST360014ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST380011ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3120022ASL', 'Mod15Write '.
  value = ProblemDevices, REG_SZ, 'ST3160021ASL', 'Mod15Write '.

  Please can someone help me?
  Welcome them
  Matthias

  If you want to install Win XP and then access the BIOS settings, the compatible SATA AHCI mode and save the changes.

  Then start using the Win XP disk and install the OS.

  All that s!

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• System Restore to factory settings after replacing the hard drive?

  I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

  Thank you

  After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

  You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

  Lenovo - call to order recovery disks:
  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

• missing hal.dll message after removing the hard drive

  Original title:Ok, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer?

  OK, I had the same problem on my hard drive missing hal.dll. My question is what windows xp writes the cmos on my computer? The reason why I ask, is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll lack. Since the hard drive is not installed, the only place where this message comes's cmos or bios of the computer.
  I know it seems odd, but I couldn't believe it when I saw it after removing the hard drive. It used to be with older computers and Windows 95 or 98 when you took a hard drive that wasn't working and installed with one that works from a different computer, you could swap out and boot the computer and make a few changes to some drivers if you.

  So what is windows xp write to the memory cmos on my computer?

  > Ok, I had the same problem on my hard drive missing hal.dll.

  The same as what? If you reference another thread, please include a link to it.

  > My question is what windows xp writes the cmos on my computer?

  It is not write anything for her at all.

  > Lack of the reason why I ask this is that I physically removed the hard drive from the computer and then start the computer I get the same message hal.dll.

  I think that you're wrong. I would like to say two things happening:

  1. you have more than one hard drive and the problematic drive was not removed, or

  2. you deleted something other than a hard drive.

  Do you have a CD in your CD drive by chance?

  What is the brand and model of your PC? Are you able to get into the BIOS?

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Restore questions after replacing the hard drive

  I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

  Hello

   
  Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved
  
  You can check out the link and check if it helps:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
  If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also check out the link:

  Recovering your files in Windows 7
  http://blogs.technet.com/b/filecab/archive/2009/11/12/recovering-your-files-in-Windows-7.aspx

   

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Cannot access through desktop remote after replacing the hard drive

  After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

  Hello

  I appreciate the efforts that you put to publish the query on this forum.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.