Satellite Pro 2100 Boot Failure

Similar Questions

• Satellite Pro 2100: booting from a CD are works not

  Hello

  In our company, we use BartPE boot disk to get on the network of the company, from which we can then use Norton Ghost to the image of our PCs and laptops. It works really well. However, I have a Toshiba Satellite Pro 2100 who refuses to read any bootable CD. Will TRY to read the disc, it simply cannot.

  I can hear it try over and over again, but it just doesn't work. I tried to write by using different media and different CD burners, ranging down to write at a speed of 8 x, but nothing helped. Is there a problem known with the reading of the CD - Rs on this beach or model?

  Tim.

  Hello

  To boot from the CD, you can press the C key immediately after starting the laptop.
  In addition, it would be very interesting to know if it is also not possible to boot from the Toshiba Recovery CD.

• Satellite Pro 2100 is really really slow running

  I have a satellite pro 2100 I killed a friend.
  He said his brother gave him and that he had no idea what was wrong because he didn't have a chance to watch it.

  I put windows xp pro top and used the bottom of the laptop pro license key.

  but the laptop is really really slow.
  It may take up to 5 minutes for nothing I click to open up.

  the strange thing is the laptop works fine in safe mode, can open things like I should.

  but in normal windows mode, it slows down to a crawl and even crashes.

  I have trie all to my knowledge.
  I even uninstalled and turn off the graphics drive that I thought that he maybe, but he always does.

  I tried multiple copies different from xp pro and even tried a copy of vista, but still the same.

  He had 2 different lots of tried in ram, 2 sticks was new aswel. I tried 3 different hard drives and still the same.

  My thoughts are that the integrated graphics card is exhausted.

  can anyone else confirm this? Certainly this isn't a software issue because I tried a few different copies of xp and vista. IM about to bin it now.

  > anyone can confirm this?
  Don t think someone could confirm everything that is related to a malfunction of the equipment.
  Here in the forum, we can talk about problems and makers of disorders, but no one will be able to say with certainty what's going wrong here.

  First laptop computer is an oldie.
  The Mobile Intel Pentium 4 CPU, isn t a up to date CPU and in my opinion, that don't expect too much performance.

  I put t know how this camera supports memory but everything below 1 GB of Ram would be good enough to the smooth running of the laptop.

  However, given that the unit works much faster saving mode, I guess there must be a hardware related problem.

• Need to find the cmos on Satellite Pro 2100 battery

  I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  The brand is a Satellite Pro SP2100, model PS210E006P9-EN number, but I can't find this brand/model on the Toshiba site. The closest I can find is Satellite 2400-103, part number: PS240 - T 014, 1, that seems identical.

  I tried to use the identify tool of Toshiba to detect what is the laptop, but that fails to provide results.

  I also need to find out what food is for this unit as the current is defective and exposed wires.

  The adapter of current with her is PA3201U-1ACA, the problem is that this card has another card on the end to fit the power plug to the back of the laptop. The connector at the end of PA3201U is too thin to fit.

  Hello

  This laptop is very old and the name of this machine is: Satellite Pro 2100 PS210E

  > I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  Usually the CMOS battery can be charged. You must connect the power adapter and the laptop must be powered for about 12-14 hours.

• Satellite Pro 2100: is it possible to upgrade memory 1 GB?

  Hi sat 2100 and looking at 1 GB but laptop reconises only 512 meg and wont work at all with 2 x 512.
  Would be a bios update help?

  Thank you
  Steve

  Hello

  According to this site about Satellite Pro 2100 memory, the laptop supports 512 MB max.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7444&ft=m&St=3

  It is the maximum value that can be used in the notebook.
  The BIOS will not help because it is a hardware limitation of motherboard!

• Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

  Hey

  I got my Satellite Pro 2100 for another few years.
  So far it has worked well.
  However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

  The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

  Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

  Hi Simon

  The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
  I would not be surprised if this player is dead. For me, it looks like the end of the device.

  Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

  Best regards

• Need new driver NVIDIA for my Satellite Pro 2100

  Hello

  Anyone know if there is a newer version of the NVIDIA graphics driver that comes with the satellite pro 2100? I looked on the Toshiba downloads section and on the NVIDIA site, I have not had any look to find everything. They simply stopped updating this driver?

  Any help will be thank you very much and I do a search before posting, but haven't found anything.

  Thank you

  Hello Steve

  Satellite Pro 2100 is fairly old unit. It is about 6 years old. Graphics card is NVidia GeForce4 420Go with 16 MB of memory only. Now the question: do you really want that Toshiba should support unit of 6 years with the latest NVIDIA driver? Please don't be crazy on me, but I really don't understand what you expect.

  A more interesting question to me is: for what purpose you need new driver? You want to use with newer games, or maybe you some graphic problems watching movies DSVD?

• Satellite Pro 2100 two cables behind the screen

  Hi, first post so be gentle with me please.

  I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
  Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

  However, the laptop works fine without them.
  Can anyone help please?

  All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

  If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.

• Satellite Pro 2100 - upgrade - upgrade memory RAM

  Hello together!

  For your information:

  Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

  Wanted to just end rumors "only 512 MB all together" or even less.

  If you are looking for, don't forget to think of the specifications:

  DDR-266 (PC2100)
  DDR-SDRAM, SO-DIMM
  200 PINS
  2.5 CL

  concerning the frequency of the RAM, building shape etc.

  Greetings

  L0nestar

  P.S.: Don't think that a debate is necessary, thread could be closed...

  According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

  Good day.

• Update BIOS on Satellite Pro 2100

  Hello

  I have a Satellite Pro 2100 (model #: PS210E-0053R-EN) and recently bought two 256 sticks of RAM for it, which according to the manufacturer, are compatible. They do not work, and I have I'll return them, but before the company was asked to take certain measures, i.e. to retest them and also update the Bios. I have never updated a BIOS before and am a little worried about something bad, or choose the wrong update.

  No one knows who is right on the section of the site? I know there's a Satellite Pro 2100, but which is compatible with all the models of this laptop?

  Thank you.

  Hello

  Satellite Pro 2100 comes with two different processors (cel or PIV) but the model number is the same (PS210E). This means that you can use the update of the BIOS for both models.

  I recommend you do traditional BIOS update using the floppy drive. As described on the page of the Toshiba BIOS update, it is very important that you refer to the Description of the Toshiba BIOS update before you continue.

• Media buttons do not work on my Satellite Pro 2100

  On my laptop Satellite Pro 2100, there are 6 buttons of media on the edge of it. I can't make them work. Any ideas? I have wmp11 when I press on them, nothing happens no break or anything cud anyone help me please.
  Thanks in advance.

  Jamie Holmes

  Hello

  Reinstall Toshiba common modules first and then the Toshiba utility controls!
  The necessary drivers and tools that you can find on the page of the Toshiba driver.

  Please return after installation and report your results.

  Good luck and see you later

• Satellite Pro 2100 - what HARD drive do I need?

  Hi all,

  I just got a Toshiba Satellite Pro 2100, but the hard disk has been removed for the protection of the data. Now, I don't know what type of HARD drive, I have to get PATA/SATA?
  Can a little help if you please?

  Hello

  You can buy this store on the computer HARD drive because it has an IDE interface. You can t use a HARD drive with the new SATA interface.

  So I agree with Akuma. Already, I think that everything is written here.

• Cannot find drivers or tools for Satellite Pro 2100

  I want to reinstall one of my old Satellite Pro 2100 notebooks.
  Unfortunately the download section lists all downloads for this laptop.

  On the German site I use:

  Arciv
  Satellite Pro
  Satellite Pro 2xxx
  Satellite Pro 2100

  Even if I search for the model and take the direct link to the driver/Tools page is not
  the list of drivers to oder tools. I get a message 'no download found. '

  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/INNOVATION/JSP/PRODUCTPAGE.DO?SERVICE=DE&PRODUCT_ID=68565&PRODUCT _ID = 68565

  Can someone point me in the right direction.

  Best regards.
  Thomas

  Hello

  There must be something wrong with the driver page
  I recommend that you check the page next time and I sure that you will find the drivers FRO This oldie ;) m

  I wanted to download a newer driver for my laptop and it didn't list all the drivers too so I guess it is temporally website question

• Help identify the Satellite Pro 2100 download driver

  I have a Satellite Pro (marked below as a PS210E-00C3G-EN and a P4 2000/256/30 G, 15XT, CDW, LW). I think it's a satellite Pro 2100, whatever.

  Problem I have is that when it comes to downloading the drivers, I can't find anything approaching this model of the selection process. I've searched the forums and there's not much on this machine otherwise than in this one, so I was hoping someone could help me identify this machine especially for driver downloads... Yes, guess who has reinstalled Windows XP without checking I had all the specific stuff Toshiba tucked away first?

  For now, I have a load of things works without drivers, and it is not at all optimal...

  Thanks in advance

  J

  Toshiba European driver on this page;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

  and choose;

  The Satellite Pro Archive Satellite Pro Satellite Pro 2100 21xx archives *.

  Then you will find all drivers available for this machine Toshiba ;)

  Good bye

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.