Satellite Pro 2100 two cables behind the screen

Similar Questions

• Satellite Pro 2100: Yamaha its driver problem & screen is sometimes black

  Hi guys,.

  I have Toshiba Satellite Pro 2100, SP2100 model No: PS210E-005ES-EN.
  Supposed to this laptop be designed for windows XP like the manual said: ok.
  I am facing two different questions must solve individually.

  The first is the audio, after formatting install a new copy of windows XP Pro, installed all Toshiba drivers, all the sums 2008 pilots, selected according to the model No, each driver installed fine except for yamaha ac - xg wdm.

  Whenever I try to install I get only "driver not installed" at the end of the day, I tried loads of other drivers designed for ac - xg wdm. Without success, when I go to Device Manager I only see "unknown device" which is the sound card, I guess that...
  Also updated BIOS updated to the latest version...

  The other problem is that the laptop is unable to send the signal to the screen; sometimes completely dead except the green light before.
  Also, I noticed that when it is off the battery light stays on but slightly dim... have to remove the battery, Plug and unplug the unit to be able to operate... processor reinstalled, pasted with white heatsink, no obstruction stuff... etc...

  We wish you all Merry Christmas...

  I forgot to say that I also tried to point to the diver manually, Setup goes very well, then ask yacxgc.sys.
  Although this file is located in the folder downloaded with the driver of toshiba cat but not accepted, when you point to does show ' file to select t...

• Satellite 1800-921: antenna integrated behind the screen?

  Can someone tell me if the Satellite 1800-921 has an antenna behind the screen?
  Thank you
  Peter

  I guess you mean a kind of antenna? As far as I know behind the screen is placed antenna WLAN for supported models with WLAN connectivity.

  I wasn't able to find info on Satellite 1800-921, but if the unit is supplied without WIFI I guess that there is no WLAN antenna behind the screen. By the way: I believe that the Satellite 1800 series is delivered without a WLAN option.

• No Satellite Pro 6100 no response from the screen

  Can anyone help?

  My 6100 Pro Satellite lit last night then automatically went into hibernation, despite being connected. Now when I turn it on there is no response from the screen, but if I plug a monitor to the laptop, the screen works (as long as I start in safe mode)

  Can anyone help?

  Hi Simon

  Disconnect all cables from the laptop and remove the battery.
  Wait a moment more (20 min) and reconnect the battery and the AC adapter.
  Then check if the laptop turns on and if the display works fine

  Good luck

• Satellite Pro M10 - horizontal lines on the screen in different areas

  Hi all

  I hope someone can help.
  My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
  It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
  The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

  Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
  A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
  I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
  Perhaps a cooling problem? Or problems of motherboard?
  The motherboard has been replaced twice, hoping that this isn't another mobo problem.

  Any advice would be great.

  Thank you.

  Hello

  I m not 100% sure but to me it looks a bit like an overheating problem
  Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

  I wonder how you were able to replace the graphics chip on the motherboard?  :|
  If I m not wrong not the chip is fixed and the replacement is very easy and difficult

  It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

  Sorry, but that's all I can suggest.

  Best regards from my friend

• Satellite Pro 2100: How to enter the BIOS?

  Hello
  I have a sat 2100 pro, I find nothing in the manual on the subject to get into the bios, I have tried a few F keys but without success, what am I doing wrong? How to do in the bios?, as I get a beep sharp inside the computer laptop beeeeep, what is this? its not an overheating?

  Thanks for your time.

  Try the ESC and then F1

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• Satellite Pro L300 - nothing appears on the screen

  Hello

  Stupidly, I dropped the phone on the floor and now I can hear the phone turn on and the loading of windows, but I don't see anything on the screen. If I pull the laptop to me, applying light pressure, the backlight turns on, but there is still no display. If someone could help it would be much appreciated.

  Thank you

  Hello

  I'm sorry to hear that, JungleMan, but it can happen to anyone. ;)

  In any case, I think that it s something wrong with the display and FL inverter which controls the backlight. You can see an image on an external monitor?
  If yes that internal must replace and also the FL inverter I think because you apply slight pressure only backlight lights.

  You can order a new screen and other parts of an official Toshiba authorized service provider in your country.

• Satellite Pro 2100: how to upgrade the processor?

  In my toshiba SP we processor 1.5 GHz depending on link . What is the best processor I can put in place of the one I have now?

  What bus speed and cache size? Am I allowed to put something like 2.8 Ghz with 512 cache size and the higher speed of the bus? where is the limit?

  Toshiba delivered this unit with two different processors Celeron (1.5 and 1.8 GHz). As you know the processor must be compatible with the hardware architecture and if you want to make a few upgrades that are realistic and do it with recommended CPU or tested.

  Another problem is that replacement of CPU on Toshiba laptops is not always possible due to the method of connection permanent CPU called TCP (tape carrier package).

• Satellite Pro 2100: How do I order the recovery CD

  Hi all...

  I tried to use the search function to find the answer to this, but so far, I've been unable to.
  I just had my laptop Toshiba Satellite Pro 2100 old friends, but the HARD drive is full of stuff I would never like games and old family photos that he told me to just delete.

  Unfortunately he hasn't his recovery disk and I tried to enter the serial number in the disk drive service replacing and he says he's too old...

  Anyone know where I can get one from?

  Hello

  Hmm... the Satellite Pro 2100 is the old series of laptop and I doubt it could be possible to order the CD from recovery for this unit. But to achieve this, I recommend contacting the local Toshiba ASP for some details.

  Another possibility to install the O on this old could be the use of the original CD of Microsoft Windows. After the installation of the own XP operating system you could visit the page of European disc of Toshiba and could download the necessary drivers.

  You can find the drivers in the ARCHHIVE region.

  Check it out

• Looking for old Satellite Pro 2100 does not not for spare parts

  Hello

  I tried to replace my keyboard with a new (no problem, I could order it) on a Satellite Pro 2100.

  Unfortunately the keyboard "cable" must be plugged into the motherboard using a little white girl 'thing' to keep the cable attached to the motherboard.

  Unfortunately, I lost this small 'thing' white.

  So I'm looking for an old Satellite Pro computer where I can take it to does not.

  Or if somene has a better idea, please let me know at:

  [email protected]

  Thx a lot

  I think you mean the PJ11 connector.
  This PJ11 is placed on the motherboard and the flat keyboard cable must be connected to this connector.
  I m not 100% sure but I think the PJ11 is mounted on the Board and I wonder how someone can lose it.

  If you need a look of old Sat Pro in eBay. You should find something

• Cannot find drivers or tools for Satellite Pro 2100

  I want to reinstall one of my old Satellite Pro 2100 notebooks.
  Unfortunately the download section lists all downloads for this laptop.

  On the German site I use:

  Arciv
  Satellite Pro
  Satellite Pro 2xxx
  Satellite Pro 2100

  Even if I search for the model and take the direct link to the driver/Tools page is not
  the list of drivers to oder tools. I get a message 'no download found. '

  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/INNOVATION/JSP/PRODUCTPAGE.DO?SERVICE=DE&PRODUCT_ID=68565&PRODUCT _ID = 68565

  Can someone point me in the right direction.

  Best regards.
  Thomas

  Hello

  There must be something wrong with the driver page
  I recommend that you check the page next time and I sure that you will find the drivers FRO This oldie ;) m

  I wanted to download a newer driver for my laptop and it didn't list all the drivers too so I guess it is temporally website question

• What card WiFi could be compatible with Satellite Pro 2100 PS210E

  I have an old Satellite Pro 2100 PS210E-005ES-FR part number and trying to locate a Wifi card to fit.

  If someone can advise on such a map, can you?

  Hmm, the satellite Pro 2100 seems to bear the USB 1.1.
  There could be a slow data transmission using a USB WiFi key. So I advise to use a wireless network card internal minPCI as suggested above.

  I discovered that this Kit (PA3212U-1MPC) wireless LAN card could also be used too.

• Portege 4010 - brands behind the screen

  Hello
  I, ve just had two of them, and they all have two points behind the screen. Almost looks like mold or a spill inside the surface, they are not trademarks of electronic type (pixels dead etc.). Can I access the back of the surface before disassembling the lid or isolating this part of some kind of glazing.
  considers that Mick.

  Hello

  I can just imagine what it could be. I checked a few websites on this unit but I put t found no point. If you think that it s a hardware fault, so you should ask ASP for more information and help.
  But you shouldn't t open or remove covers on your device

• A few questions regarding the hardware upgrade and the games on Satellite Pro 2100

  Hey,.

  I thought that posting this here because it's more about the lines for the games I could think on another topic.

  I'll get to the point... Basically, I bought a laptop from a guy that my friend knew. He barely used this laptop and didn't know anything about computers, and he tried to avoid as much as possible. So he got rid of this laptop for me for real cheap.

  Now I got it, I had expected either of two things with the laptop.

  (1) what I'll use it so I can sit in his bed and travel a little bit while having files, movies, music and internet access. (it wasn't my main idea)

  Or

  (2) it allows to play video games on it, or to update, so I have a better chance to do so.

  I was hoping to get for video games, mainly for my brother to use because his computer is lagging a lot while playing world of Warcraft. I was hoping that this notebook would give him a better experience for a while.

  But as I was installing the game on this, I noticed that the disk space is low, so I'm going to buy an external hard drive, so I can send files between the PC and the laptop, and I got an error message saying that the RAM was under "minimum requirements" for WoW.

  So I know that I got to level it with something big, but I know not what, so I'm not quite sure that this laptop will run the game at a decent rate. So I thought that I turn to a computer forum and ask.

  It's my laptop;
  [Satellite Pro 2100 PS210E | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook = Yes & PRODUCT_ID = 45659 ie]

  This laptop will do the job don't you think?
  Or it will be better for simpler things, or less if I had the ram to 1gig?

  I don't know much on the laptop, and I'm not really willing to spend too much on fixing, if it's just a change of the ram, then it wouldn't cost much for than to upgrade around 1gig.

  Hello

  First of all, I must say that this notebook belongs to an older series laptop.
  It was equipped with the 1.8 Celeron CPU, 256 MB RAM, 20 GB or 30 GB HARD drive and a 16MB graphics card internal.

  What you can do is upgrade the RAM up to 1 GB (2 x 512 MB) and the HARD drive. But I think that the maximum size of HARD drive that would be recognized by the BIOS is 120 GB.
  I think that the laptop supports one IDE controller and it limited because of the 28-bit LBA HARD drive size.

  So finally, it is important to mention that you can not pass the graphics card because it s soldered onto the motherboard. Upgrading the CPU is not possible or very difficult.

  I come to the conclusion that you will not be able to play games of new generation on this machine. The hardware specs are maybe too low a few simple games would run on this laptop but I'm sure that other newer games will not run smoothly.

  Welcome them