Satellite Pro A200 how to get a Vista 64 bit of Toshiba Recovery disk

Similar Questions

• Can Satellite Pro A200-1NB - I use Windows 7 64-bit?

  It's my laptop: Satellite Pro A200-1NB part number: PSAE7E-00V00CG3
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/autodetect.do?service=EU&action=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = & RQS = TRUE & MODEL = its grated + Pro + A200 & SERIES = K 97348001 & service = EU & LOCAL E = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 32 & PANUMBER = PSAE7E-00V00CG3 & ERROR = 0

  I can use it on Windows 7 x 64? I see that there are not all drivers are in the 64-bit version, so I want to know if everything will work property with 64-bit Windows?

  Thanks for the reply

  Mario

  Hey Buddy,

  You re right. After the download European driver Toshiba for Windows 7 64-bit are not all drivers available. I checked the downloads for Vista 64-bit and all the drivers you need are available.

  Drivers Vista and Windows 7 are similar, then you can try to use the 64 bit Vista drivers. Most Vista drivers work on Windows 7.

  In addition if something does not work you can use other Satellite A300 drivers for example. This laptop supports Windows 7 64 bit and the drivers should be similar, in my opinion.

  Good luck! :)

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Re: Satellite Pro A200: can I get the drivers of preinstallation discs?

  I have Toshiba Satellite Pro A200 (PSAE1E) with XP Pro.

  I made a mistake and tried to update the Realtek audio drivers, knit drivers, but does not show the Realtek HD Audio Control Panel to the top, not in the system tray, or in the Control Panel folder.
  I contacted Realtek, they gave me a program that analyzed my HW and then they said that my phone is not supported, I must ask the crazy drivers my manufacturer, laptops, Toshiba.

  I tried the drivers that were running [Toshiba - download drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] page, but those who did not work either.

  So, there is one thing I can do, if it is possible, how can I get drivers of Toshiba recovery disks, without having to reinstall everything again?

  Something like this is not possible. Recovery image is somehow the package, you can not only pilots.
  Have you tried to roll back the OS (System Restore) before you did this updates?

• Satellite Pro A200: How restart after hibernation

  I must be a fool.
  I put in power button new Satellite Pro A200 to activate the Hibernate.

  Then set the BIOS password. Despite the password entered correctly, it won't start windows.
  And can't stop laptop holding down the power button to force the reboot.

  Then
  (1) how to restart short waiting until the batterys flat roll... And
  (2) when and if I get a reboot, which key (s) should I hold down to get into the BIOS.

  Thank you much for the help.

  > Despite the entered password correctly, it won't start windows.
  > Nor can I stop laptop holding down the power button to force the reboot

  You have a Phoenix BIOS? If yes then you have to press the F2 key immediately after the laptop starts to access the BIOS. But you will not be able to access the BIOS, if the password is not right and cannot be verified.

  The unknown BIOS password can be removed only by an ASP in your country. There is a special procedure that is known only to authorized Toshiba service technicians.
  Therefore, follow the recommendation and contact guys!

  PS: The laptop must stop when you press the power button for about 4-5 sec.
  If not, unplug the AC and the battery to turn off the computer!

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro A300D - how to get Vista drivers

  I bought a Toshiba Satellite Pro A300D laptop a few days ago.
  The first task was to wipe Vista Home Premium there and put professional Vista I needed to connect to a domain.

  I did this and then install the drivers from the Toshiba driver download pages.
  There were a lot of riders who have failed, but I managed to fix most of the problems aside when I display the laptop to a projector, I can start cutting the bottom of the external display only.

  In any case, I am now led to believe that there is recovery of HARD drive on the disk that could give me the right drivers that they have been installed at the arrival of the laptop.
  How can I get these out of the system on a disk for example so that I can resinstall?

  Thanks for your time.

  Hello

  > Anyway, I am now led to believe that there is recovery of HARD drive on the disk that could give me the right drivers that they have been installed at the arrival of the laptop. How can I get these out of the system on a disk for example so that I can reinstall?

  I think that this is not possible because the recovery of HARD drive contains only unique image files and you will not be able to get only the unique drivers of the recovery image.

  HARD drive recovery can be used to perform a new installation of operating system from the HARD disk (without using the disc).

  The European driver Toshiba page usually contains all drivers Vista compatible and necessary for your laptop model. So I doubt that your problem with the projector might have something to do with the Vista drivers.

• Satellite Pro A100: How to get updates for driver for ATI Radeon Mobility X 1400

  Hello

  I am aware that the driver for my on-board graphics card is outdated.
  When I download a updated from ATI driver and try to install, it tells me that I can't install the update the system there and contact Toshiba for the updates.

  Please can someone tell how can I get a driver updates for this card on my Satellite Pro A100 series?

  Concerning

  Macca.

  Hello

  You can not install drivers ATI ATI site because these drivers are not designed and certified for Toshiba laptops.
  These drivers can affect the functionality of notebooks and in worst cases could overheat your GPU

  * So if you want to use these drivers, you can do it but only at your own risk! *

  You can install this driver in Device Manager;
  You must use the Advanced installation procedure and you will have to indicate where the graphic driver files were stored on the HARD drive

  Good bye

• Satellite Pro 4340: How to get older versions of BIOS?

  Hello

  I have a Satellite Pro 4340 and I recently updated the BIOS from v2.6 to v2.7 unfortunately since then randomly, the laptop freezes and requires a reset. Check the error log indicates a fault in which case the ACPI BIOS is written in an unauthorized area. I would now go back to BIOS version 2.6, however the support from Toshiba site only lists the current BIOS v2.7 and not the older versions. How can I get the old version? Anyone here happen to have a backup?

  Thank you

  Ben.

  Unfortunately, to my knowledge, you will find only the most recent update of the BIOS on Toshiba page.
  I don't think that the authorized service provider is able to downgrade the BIOS to the original version

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite Pro 2100; How to get additional software without recovery CD?

  How can I get the software WinDVD and Drag'n Drop CD for my Satellite Pro 2100 without the recovery disk?

  Post edited by: yirms

  This is not possible because this additional software is not available on the download page of Toshiba why?
  Because this isn't a Toshiba Software, but software manufacturers, 3rd party.
  This software comes with the recovery disc and can only be used with your laptop!

  I think it has something to do with licensing issues

• Satellite Pro A300: How to recover the Vista operating system

  My friend has a Toshiba Satellite Pro A300 it has a 4 GB of ram, but on Windows Xp shows only 3 GB
  I also want to put in place the back of the Vista, but I can't not insatall any operating system (only the Toshiba Xp dvd)
  (there is a HDD recovery folder on the C drive, I think it is the Vista that he owned before but a don't know how to install it)

  Ok. If the folder in HARD drive recovery then it should be possible to carry out a procedure for HARD drive recovery, remain on the second partition.

  First of all, start Notepad and press F8 immediately after that the laptop has been powered. Then choose the first option called fix my computer.
  A new window should open, and you should choose the last option called Toshiba HDD Recovery.
  Then follow the instructions on the screen.

  This should usually works if the folder of HARD disk recovery and partition has not changed or deleted.

  Check it out if it does not, you will need to order a Vista of Toshiba Recovery DVD:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite Pro L40 - where to get the Vista recovery disc?

  I lost my business vista recovery cd rom by wrong cd rom is broken.
  hope someone can help me,

  Hi sherin2222,

  That's no problem because you can order a new Toshiba recovery disc directly but I m not 100% sure if it is possible for the older by Satellite Pro L40. Just check out the recovery shop:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you can t find, ask the ASP in your country. Guys can order such a disc.

• Satellite Pro P300 - how to get the original without media image?

  Hello

  I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

  The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

  Liam is just that Win 7 is better than Vista OS.
  So if you have the ability to install Win 7 I recommend doing this instead of Vista.

  However, the Toshiba recovery disc contain only the Vista OS.

• Satellite Pro A100 - how to get the Wlan connection works

  Help!

  I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
  My son has a laptop and gets a good connection anywhere in the House and even outside.

  He thinks I have a dodgy wireless adapter, this could be the problem?
  Can I fix it myself?

  Maybe download a new driver?
  Any suggestions would be much apreciated.

  TOSHIBA SATELLITE PRO A100

  Hello

  Your ad is not really useful.
  I mean that there is no detail about your problem
  You should first check if the laptop supports the wireless network card.
  This can be done in the Device Manager.

  Usually the WLan card must appear in Manager devices-> network adapters.
  If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

  But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

  Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)