Satellite Pro A60 and Port Replicator

I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

Hello

I understand your problem in this way.

You have connected the printer via Port Replicator ports for the A60 SatPro.

Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

When you want to validate this information, it would be easier to help you!

Bob

Tags: Toshiba

Similar Questions

  • Advanced for Satellite Pro A120-105 port replicator

    Hi all, I'm a Satellite Pro A120-105, but he's only got the basic spec ports and I want to get the III or III advanced port replicator + I need a firewire connection.

    What replicator is compatible with the model of laptop above?

    Hello Anthony

    All laptops can be connected to port replicators have port replicator port in the lower corner. Are you sure that your laptop have such port too?

    I ask this question because the specifications of laptop for your laptop model says that there is no such port on your laptop model. Check it out!

  • For Satellite Pro M70-220 port replicator

    Hello

    I have a M70-220 and I need of series, parallel, and ps2 connections. I found this unit at Toshiba: PX1098E-1PRP - replicator USB 2.0 ports. My question is if it works with my laptop...

    Thank you.

    Hi Andrei

    One of my friends use the same USB port replicator with its Satellite P20 and M30x. I put t not see why it should not work with your unit too.

  • Satellite pro A60 com port are not not in modem device manager

    Have a new A 60 pro and cannot connect to the internet via the modem.
    The offer of 'solutions' by help needed to make sure com port 1 was turned on, but only a lpt port has been listed.
    XP pro says that the modem works well.
    How to get com port 1?

    David

    Hey there,

    IM afraid that you do not have a hw to port com on the device. Com ports you have on the laptop are "virtual ports. If you're expriencing diffuculties internet connection, could you please go to Device Manager (by going to the system control panel and choose the Hardware tab) and then access the properties of the Toshiba software modem, go to the diagnostics tab and click the query modem button and display the result.

    See you soon,.

    PS you'll only com port listed in Manager of devices if and only if you have a serial port on the computer.

  • Satellite Pro A60 and a new HARD drive

    I installed a new hard drive on my notebook and I can't launch Win XP pro or Win 98.
    During the sequence of booting with XP, I get the error message:
    Initializing device NDIS:
    WINDOWS PROTECTION ERROR.
    I checked my bios settings, there are only two
    [HARD DISK MODE = Enhanced IDE (normal) and (standard), I have tried both to no success.]
    I can run 98 in safe mode, but when I use this mode I can access my DVD - ROM is more.

    Hello

    Please check this link http://support.intel.com/support/motherboards/desktop/sb/cs-008712.htm.
    In my opinion, you should try to preinstall the device using recovery DVDs.

    Good bye

  • During BIOS update by Satellite Pro A60 went down and did not start

    Hi all

    I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

    Tried to start with (~) key pressed (a tip I received from a friend), but without success.

    I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

    Does anyone know how to fix this? Any help would be greatly appreciated.

    Thank you

    This doesn't sound good.
    If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
    Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

    In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
    To avoid such damage and mistakes, Toshiba published FAQ document.
    How to upgrade the BIOS on most of the units!

    That you should read before making updates to the BIOS!
    Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

  • Module of RAM not recognized on my Satellite Pro A60

    Hello
    I have a Satellite Pro A60 and recently bought a RAM of 512 MB memory upgrade.
    I have fitted on the correct port, however, there does not appear to be be achnoledged as being there.
    Can someone help me?

    [Edited by: admin August 31 05 19:02]

    Hi Robert,.

    I guess your A60 has two RAM ports, then I suggest that Exchange you the two RAM modules autour to check if the port rather than the modules itself that is the source of the problem.

    I hope that you took of anti-static precautions before manipulating the new RAM module. They are easily damaged by a discharge of static electricity.

    HTH

  • Toshiba Satellite Pro A60 Celeron 2.8 GHz, 256 MB of volume?

    Hello

    I recently bought a Toshiba Satellite Pro A60 and I am pleased with the point, but despite the turn the music full volume and even the windows sounds are very quiet? To me it seems not be significantly quieter than other notebook that I used. This is how the element should work, or would that be a possible problem?

    Thanks for any help or advice you can give.

    Hello

    Did you scan you check all parameters in audio sounds and Audio Devices Properties?

  • Question about the use of the Satellite Pro A60 fan

    Hello

    I intend to get a Satellite Pro A60 and I was wondering how much the fan turns on.

    Could someone comment if the fan turns on when the machine is totally inactive, and how he lights up when the machine is used for word processing and surfing the web?

    For example, when using normally does the fan turn on 1/10th of the time, or 1/2 time etc.?

    Thanks in advance,
    Pete.

    Hello

    Sorry I can't give you specific information about the cooling fan. A60 is known to me. It's a very nice laptop. Cooling vent is in reverse I am a pretty that there is no background noise.

    If you make the decision to buy it, look at what the capacity of the HARD drive is too high and that the DVD-ROM can burn a lot of different formats (DVD Super Multi drive).

    Have lots of fun with it.

  • Satellite Pro A60 - where to buy the recovery CD

    Hi newbie here.
    I have a Satellite Pro A60 and it gives my son for his college stuff.
    I want to reinstall XP Pro, but I can't find the CD that came with the laptop we moved house ect.

    Is there anywhere where I can buy an of for the laptop, so I can do like new so that he can use it how he wants?

    Thank you very much

    Yes, you can order this CD with the service provider authorized in your country!

    Just contact the guy and order it. It shouldn't t be very expensive.

    Best regards

  • Satellite Pro A60: error code 11030 - invalid destination drive

    I have a satellite pro a60 and it won't let me do anything I have an error message 11030, - drive destination not valid. can someone please help me solve this! regards Jean

    Hello

    I read that this error can appear after using the Symantec ghost.
    Have you used this program?

    Try using the chkdsk command or try to run the error checking that you can find in the properties of the HARD drive.

  • Satellite Pro A60: Is it possible to boot from USB to use Backtrack 3 USB

    I have a Satellite Pro a60 and I was woundering if anyone knew how I can boot from the USB to use Backtrack 3 USB Live?

    Hello

    It is not possible to boot from the USB key. Only the start of the ODD, the HARD drives, the LAN and USB FDD (ie. diskette bootable) is possible.

    Best regards

  • The battery life on a single charge by Satellite Pro A60

    I bought this linen flea market (February 8, 2005 manufacturing date) and I was wondering if I should invest in a spare battery. After charging full, it shows lasting about 1 h 20 min, but diminishes very quickly with use it and don't think I have more than one of the time out of it.

    The battery is only a 8 cells Li - ion 14.8V 4300 mAh

    Should / can expect something better?

    Hello

    I think that it s not easy to say how long the laptop must works only with a battery.
    Battery working time depends on the use of the laptop. You know, it depends on the applications and devices that move on the laptop. Heavy software like games or video needs more graphics performance as office software. If the player or disc HARD turns all the time so the battery performance will also decreases a lot faster.

    But you can also try buying a battery of best performances of the witch. On the Toshiba page, I found a battery for Satellite Pro A60 and it s a Pack Li - ion, 9 cells, 4500mAh battery. As you can see, this battery supports 9 cells and 4500mAh and should be better like your old battery first.

  • Satellite Pro A60: TV S-VHS on does not work

    I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

    I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

    I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

    Best regards!

    Hello

    You should also check the TV settings. You must choose the right channel.
    As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
    If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

  • How to reformat my Satellite Pro A60

    Hello world.

    I have a very old laptop (Satellite Pro A60) and have just started to use again (will have to buy a new one soon), but this 'thing' is incredibly slow. I want to just reformat the drive, but I am at a loss how to do. It was in fact the portable parents first if I do not have the original XP disc.

    How can I do this? Any help will be much appreciated.

    Thank you.

    If you wish to format HDD books, then you will need to use an operating system.

    Usually, the laptop came with the Toshiba Recovery CD.
    This recovery CD contains the OS, drivers, tools and additional software.

    You must simply boot from this CD (recovery CD) or Microsoft Windows CD and the operating system install.

    That s it!

Maybe you are looking for