Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

Similar Questions

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

• Can't get into BIOS after the use of "Quick start" mode

  Hello

  I do things
  1 - Enter my BIOS
  "' Quick start of start 2-change of speed to.
  Then I restart my knees and Toshiba logo disappeared.

  I want to get into my BIOS again, but how
  I tried F2, F12 and del not question

  Please help me

  > I ve tried F2, F12 and del no question

  What cell phone do you have exactly?
  Have you tried to press ESC, then F1?
  If this isn't it!

  Notes; You must press the buttons immediately after the laptop has been powered!

• No boot/cannot get into bios after the withdrawal of the dvd player.

  Hello

  My dvd player is broken and I wanted to exchange it with another. But the computer does not so old is removed. It only shows the boot logo, but it does not continue, and it is not possible to enter the BIOS.

  This happens with and without the new disc. That's why I thought that it is not a compatibility problem.

  Someone has an idea of what I can do?

  My laptop: Toshiba S-1800-514

  Hello

  as you have changed the drive in a new, was the new drive the same as the old or that you have purchased a better?

  When you start Notepad and the Toshiba logo seems to be at - it something to do with the laptop. As (F12) or enter the BIOS boot options (ESC and after this F1)?

  What appears when you changed the old rear drive? The laptop works?

  Keep me posted!

  TOK

• Satellite Pro C50-A-1E2 - possible compatible upgrades

  I would like to know the chipset and the taking of the C50 A 1E2, for possible compatible upgrades.

  Upgrades supported are RAM and HDD/SSD.
  There's another interesting for you?

• Satellite L840/020 - can't get into BIOS after enabling the quick start option

  I have a laptop Toshiba L840/020 (PSK8LA-020007). I recently installed a 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on this Intel and enabled the fast boot option in the BIOS (boot speed > fast).

  Now I can't get into the BIOS, no matter what I do. I tried pressing the power button / stop while pressing F2 (as suggested by a few other forums), upward on default that I tried all F and Esc keys, but nothing does. I also tried repeatedly pressing F2 during startup, plugged a USB external and supported on F2 keyboard on it, but no matter what I can't get into the BIOS.

  When I go to the Toshiba support download section > 8 64 bit Windows, I see also a BIOS update for my laptop, but when I try to install I get the following error:

  ---------------------------
  Error
  ---------------------------
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1
  ---------------------------
  Ok
  ---------------------------

  I'm not changing platform.ini and flash, without first asking the help of the community.

  Please let me know how to enter the BIOS. Thank you.

  null

  Hello

  First try INS then F2 key.

  Then you should be able to access the BIOS, I recommend disabling the QuickStart in the BIOS if you can successfully enter the BIOS.

  With regard to the update of the BIOS.
  I checked the page of the Toshiba driver to THE and it seems that the BIOS v6.20 is even similar to Win 7.
  I think that the BIOS update must be done running the system pre-installed Toshiba since Win 8 is not officially on the market, and to my knowledge, there are some big restrictions updated BIOS running Win 8

• Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

  Dear Sir

  I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
  I try to do the recovery only by pressing f8 without answering.

  How can I recover my laptop to its state of origin as drive HARD recovery again in d:
  Thanks in adv

  Hello

  You will not be able to restore the factory settings because another operating system has been installed on the first partition.
  Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

  But if this doesn t work then you will not be able to use HARD drive recovery.
  In this case, you will need to order the new CD from here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Can't get into bios after installed processor.

  Hello
  I have recently upgraded the CPU in my p6-2370ea to an i5 - 3570 k. The processor was faulty and I tried in several systems. After he go out and by replacing the i3 came with the pc, I get 6 beeps bios long before the pc starts again. After doing a lot of research I found that I need to disable secure boot and enable legacy mode (I removed and replaced the graphics added a 7750). However, I can get in the boot options, but whenever I go UEFI settings and click on "restart", I get 6 bios beeps and my screen does not light. In short, I can't access the Bios. I need to remove the graphics card and to do so with that discreet? Or is it possible to go directly to the UEFI boot rather then requiring a reboot of the system?
  Thank you
  Whyamiworking.

  Whyamiworking, welcome to the forum.

  I suggest you return the computer to its original configuration.  Then you should be able to enter the BIOS.  Be careful when you change the settings.

  If your problem is solved, please click "accept as a Solution.

• Can't get into Bios after you enable the sata port

  Hello community,

  I have an Optiplex 755 and added a second hard drive.

  In bios the sata 2 and 3 ports have been disabled, I enabled both because I know not didn t on the port of witch the new drive has been connected.

  After a reboot the system stuck on ' Drive 3 not found: Serial ATA, sata-3.

  When I disconnect the new drive, I get the above message for 2 and 3 of the road car!

  I can only power the system off, the keyboard is not working at the moment. After a reboot, I can select F2 or F12, but the system will be blocked with the same error.

  I tried a third device to the port missing but then there is no error message, but there is only a black screen with a blinking cursor. No chance to get into the bios setup.

  The version of the bios is A08.

  Can someone help me please.

  Hi Andreas,

  Thank you for compensation for me!

  What may help is to reset the BIOS. To do this, you must follow the steps detailed here: ftp.dell.com/.../optiplex-755_user%27s%20guide_en-us.pdf (search for clearing the CMOS settings).

  Before the passage of the system back on, make sure that the system is in its state of origin (the original hard drive and optical drive). This can allow you to start the operating system successfully and access the configuration of the system as well.

  Let me know how you go!

• Satellite Pro L20: FN + F8 key does not work after the installation of new

  Hello
  I just reinstalled xp on my laptop and I can't find drivers that work my hardware (F8) wireless function key.
  Unfortunately I don't have the CD of drivers Toshiba with me, I work as an expat abroad so I count on the official website of Toshiba for my drivers.
  I downloaded all drivers successfully vital but can find no reference on the site that will help me with the problem.
  I tried to turn on the radio via the LAN setting but when I try to activate I get the message telling me to turn on the hardware!
  Any suggestion would be accepted with gratitude.

  Thank you

  Hello

  On the Toshiba driver page, you will find the installation instructions how to install all the drivers of Toshiba.
  It is very important that pilots will settle in the right order.

  In addition, if you want to spend on the WLan, you have to activate the WLan switch on the side of the laptop and also to enable the antenna WLan with FN + F8.

• How to get into Backgammon after the message "General error"?

  I'm registered, I chose the version computer game, standard, game, then display 'General error', 'try to reload. No way to reload that AFAIK. How can I make it work. I turned off blocking.

  Hi CarolCaseZO,
   
  1. When you say Backgammon are you referring to an online game?
  2. when exactly you get this error message?
  3. were there any changes made to the computer before the question?
  4. what browser do you use?
  5. If you use Internet Explore version of Internet explore you use?
   
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using
   
   
  Check out the link mentioned below, if you are using Internet explorer.
   
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
   
  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  For reference:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213/no
  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Method 2:
  If the problem persists, I suggest that you post your request in the community of MSN games, for further assistance:
  http://zone.MSN.com/en/General/article/community.htm
   
  Post a screenshot of this question on this forum so that we can understand the question in a better way.
  How i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053
   
  Hope this information helps.

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• Satellite Pro C50 - A - screen Black/Brown problem

  Hi all

  I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.

  I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.

  Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.

  First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.

  The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...

  I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.

  * Are there known error, malware or fault in laptops that could help me? *

  I thank very you much in advance!

  To be honest I have don recovery think t install image will help you.

  I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.

  In the past, some people have reported on similar problems, and the reason was bad FL inverter.
  The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help.

• Satellite Pro C50 keyboard problems - A - 1 L 6

  Hello

  I just bought this new Satellite Pro.

  I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

  I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

  I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

  And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
  .
  So, this is my first experience and unlucy in the world of Toshiba...
  Is there someone who can give me some advice to solve this problem?
  It may be a problem running on the new laptops, and someone knows how to fix this?

  Thank you very much!

  Hi guys,.

  As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
  I found the new BIOS for Satellite Pro C50 - A
  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
  Worth a try

  Another question: If someone has done to test a USB external keyboard?
  In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

• Can I get ODD in Satellite Pro C50-A-166?

  Hi there - I have a Toshiba Satellite Pro C50-A-166, product code pscg7e-00y002en, this laptop has no internal optical drive dvd rw standard, but it has a space with a plastic cover in the form of an optical drive to shutter.

  Anyone know if you can hold DVDRW internal optical drive in those laptops please? and if so what models could fit?

  Thank you James

  Hello

  I don't have this model of laptop, but some models C50 - A Satellite there optical drive therefore, theoretically, it should be possible to mount a more. I found the info that Satellite C50 - next to 5.25 inches and manufacturer is Panasonic, model UJ-841.

  Try to remove this cover and check if the connector is available.