Satellite Pro C50 cannot connect to bluetooth speakers

Hi newbie here.

My new computer C50 Pro Satellite laptop detects but does not connect to a new speaker Bluetooth in Cambridge or my iPhone, despite both being visible.

Icons appear in devices Bluetooth, but with the orange warning triangle. Tried to download updates of b/t of Toshiba, no effect. (4 years old HP laptop works very well with both).

Help?

These speakers are not known to me, but generally, the connection is not very difficult.
First you must make sure that BT is enabled in the settings Windows 8.1 (under PC & peripherals → Bluetooth)

I guess you will have to press a key / button available on the speakers to start the pairing process.
After that you should go to control panel → → its playback and should choose the BT speakers as the default device.

Tags: Toshiba

Similar Questions

  • Satellite Pro A200 cannot connect to the wireless network

    Hello

    I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

    I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
    Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

    Any ideas?
    the FN/F8 will work?
    Help! Please, I beg you!

    Have you tried using System Restore and restore the operating system on time earlier?
    Maybe this will remove the update installed, and you can again use the WLAN.

    Check it out.

  • Re: Satellite Pro C50 - cannot install Windows 8

    Hello.

    I have a Toshiba Satellite Pro with Windows 7 preinstalled c50.

    It comes with 2 DVDs containing Windows 8.
    I tried to upgrade to Windows 8 (following the instructions included in the Manual: BIOS change, etc.), but I can´t install it.

    After booting from the DVD, it doesn´t appear the installer of Windows 8, Windows 7 recovery options.

    Could you please help me?

    Thanks in advance,

    Sergio

    Hello

    I assume that you have followed the solution step by step, as described in these documents:

    [Guide to upgrade Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03EJ0001R01.htm]

    [Update Installation of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03ER0000R01.htm]

    [Windows upgrade 8 - Notes and Restrictions: http://aps2.toshiba-tro.de/kb0/TSB2A03EL0000R02.htm]

  • After WXP installation Satellite Pro A200 cannot connect to Wi - Fi

    I installed Windows XP Home edition on my friend's laptop computer because she has lost the drive and now we can not connect to its wi - fi connection.
    The laptop does not recognize it and it is not listed in the menu of the device. I have updated with 2 WOOD and tried the drivers on this site but nothing

    Any help would be great

    Satellite Pro is exactly (A200-xxx)?
    Obviously you has not installed the right driver WLAN if the wireless network adapter is not listed and recognized correctly in Device Manager.

  • Satellite Pro A40 - cannot connect WIFI tstablish

    Hi guys

    I have a Satellite Pro Model: PSA45E - 0184H - EN

    Problem is I can not establish a wireless connection, the laptop can not be set automatically detect wireless networks?

    Any help would be appreciated.

    Thank you.

    Hi robs1971,

    Is your wireless network card equipped laptop? I ask this question because some Satellite Pro A40 models did not have WLAN features so I would be important to know if you have WLAN or not.

    Also check device manager if the wireless network card is installed correctly. Make sure that this latest WLAN driver is installed, and check the Toshiba WLAN Portal:
    http://APS2.toshiba-tro.de/WLAN/

    If WLAN network is within reach and SSID is not hidden the computer will automatically recognize. Then you need to enter the encryption key and that s all! :)

  • Satellite Pro C50 - A - speakers don't put muted when headphones are

    This morning my Satellite Pro C50-A-1E4 suddenly stopped, put Mute speakers when headphones are inserted. Previous messages solved this through a Realtek Control Panel that is not on my particular system.

    Hoping that the fix is easier just cannot find where to put the right parameters.

    Hello

    Usually when you connect earphones in sound properties > speakers of reading should be turned off and headphones must be listed as active.
    Just plug in the headphones and try to change these settings manually. Does not work properly when you do this?

  • Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

    Hi all.

    I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

    I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

    After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

    I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

    I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
    The first onewas ok, everything works. Either everyone has this problem :/

    I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

    Any suggestions what may cause the problem or how to fix?

    I think you should first clarify whether your headset is OK.

    My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

    Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

    If in case the headset is faulty, the speakers and the headphones would not work.
    So I think you should check the helmet first.

    If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
    Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

    The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

    However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

  • Satellite Pro C50 - A - screen Black/Brown problem

    Hi all

    I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.

    I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.

    Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.

    First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.

    The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...

    I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.

    * Are there known error, malware or fault in laptops that could help me? *

    I thank very you much in advance!

    To be honest I have don recovery think t install image will help you.

    I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.

    In the past, some people have reported on similar problems, and the reason was bad FL inverter.
    The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help.

  • Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

    Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

    I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

    I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

    Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

    I have a Toshiba Satellite Pro C50 - A - 1 k 9.

    Thanks in advance.

    I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

    Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

  • Satellite Pro C50-A-1E4 - how to merge partitions?

    My laptop is a Satellite Pro C50-A-1E4 running Windows 7 Pro 64 bit.

    In receiving a year ago, I replaced the hard drive with a 256 GB SSD. I partitioned in a 60 GB C drive and a 192 GB D the rest drive is the hidden restore partition.

    I have install all the software on C and my personal stuff on D.
    Now, the C drive is nearly full, but there are a lot of free space on D.

    Can you advise me how reallocate for example 20 GB from D to C with nothing to lose?
    I would like to make a complete backup of the drive D.

    Basic support for Windows (seems to me) to sit on a hard drive where the bottles must be adjacent, but I'm assuming that does not apply to an SSD.

    Any help and advice would be appreciated.

    Thank you.
    Harold

    Hello

    I recommend you to use a 3rd party software called Gparted.
    http://gparted.org/LiveCD.php

    Its freeware software that allows you to change the partitions on SSD or HARD disk.

    You can create a bootable USB flash memory key and might start Notepad to change the partitions.

    This s really great freeware software.

  • Impossible to change the bright screen on Satellite Pro C50-A-143

    I run windows 8.1 and I could not change the brightness of the screen for a while now.

    It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

    According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
    I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

    Is this correct?

    Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
    Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

    Then you should be able to use the function key to decrease and increase the brightness of the display.

  • Re: Windows 7 on Satellite Pro C50-A-1HQ

    I have a Satellite Pro C50-A-1HQ with windows 8.1 and I'm pretty tired of this OS because of problems with the use of disc 100% that I get sometimes and I have not been able to solve.

    I would like to install windows 7 in this labtop. Do you know if there is a problem with that? Windows7 will work fully? I need to change anything before I install it?

    Thanks to you all!

    I don't know what can be wrong with the use of disk, and I hope that you tried to optimize version of the OS preinstalled.
    I visited the Toshiba download on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and I found all the drivers, tools and utilities for Win7 64-bit if your machine is fully supported. To be honest I think that your machine will work fine and stable with Win7.

    Before do you anything create recovery disk (DVD or USB) using preinstalled Toshiba recovery disc creator and you can use it at any time if you have notebook with factory again.

    See also http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

    If you have any other questions you are welcome.

  • Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

    Hello

    I own Satellite Pro C50-A-1E2.

    Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
    I am trying to get into the BIOS but without success.

    I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

    I found this piece of information through Googling: "press f2, and then press power. But always without success.
    Help with my problem?

    Thank you.

    Hello

    Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

    Check it out.

    By the way: for some series laptop, press INS key then F2 worked too.

  • Should what ram I use in Satellite Pro C50 - A - 1 M 3

    Hello

    I recently bought the Satellite Pro C50 - A - 1 M 3. Reference number: PSCGKE-00M00GEN and since I have an old RAM stick from my previous laptop which is: Kingston, KVR1333D3S9 / 4G, 204-pin DDR3 SO-DIMM, DDR3 1333, Pc3 - 10600 CL9 204 pins

    I was wondering what would be compatible with my Toshiba laptop?

    Thank you for your time and your attention.
    Concerning
    Jim

    This unit manages the DDR3 SODIMM and these modules supports 204pins

    So I think your DDR3 SODIMM module could be compatible

  • Satellite PRO C50-A-1E0 - failure of Windows 10 - now Toshiba Video Player is missing

    Hi all

    I've updated for Windows 10 drivers recommended by "Toshiba Service Station", all were successful outside of Toshiba Video Player. He said now "our product is not available for update!
    Any ideas? I can't download it anywhere, and the fact that I've updated for Windows 10 recovery isn't available to 8.1.

    Updates can be found here:

    http://win10upgrade.Toshiba.com/swup...=en&country=GB

    Kind regards
    Ian

    It's on my laptop Toshiba Satellite PRO C50-A-1E0

Maybe you are looking for

  • How to use the anti-span norton on thunderbird

    I want to use Norton anti-Span as my spam filter in Thunderbird. How can I do this?

  • WANT x 360 laptop: how to disable TouchPad on ENVY x 360 laptop?

    1. I have no key. 2. I have attached a mouse but the TouchPad is always enabled. 3. I have 2 options, but all of them are frozen: Control Panel\Hardware and Sound\Tapping\TouchPad Settings\Double to disable Zone press to activate or disable the Touch

  • SLI problem with predator x 34

    Made on the top that I have to reset the native a ghost profile profile whenever I restart, but I also have to reset my prreferences SLI. On top of that if I choose the SLI in full glass applications, I'm fine. The monitor reports 100 Hz and I can pl

  • (Redirected) Help! Dell XPS 8900 can't stand Windows Pro 10 - update and Support nightmare!

    Is anyone else having problems?  I'm on my third dell machine and the 3rd time by installing the operating system and all my software.  Reference Dell tells me that all drivers on the XPS 8900 System (supposed to be a premium facility) must be update

  • Cannot start the new installation

    Good evening Tonight, I installed a new motherboard, power supply, CPU, video card, video card, etc. Basically, everything but the hard drive. When I went to it starts, I was unable to make it work. My BIOS seemed to have been implemented correctly.