After WXP installation Satellite Pro A200 cannot connect to Wi - Fi

Similar Questions

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• Satellite Pro A200 cannot install the driver of storage on an unattended installation

  Hello

  I created an image of XP RIS for a Toshiba Satellite Pro A200 and have downloaded the correct drivers for this laptop.

  I scoured internet solutions on how to configure the .sif file and where to install this driver on the image that he won't seek the intall the storage driver so that it can not find the Sata HD to install the image.

  Everyone knows that before and if so please could you point me in the right direction I've been struggling with this for a few days now!

  Thank you

  Hello

  You must include the SATA drivers.
  The SATA drivers are part of the Intel Matrix Storage Manager, which can be downloaded from the Intel and Toshiba page page.

  Here's a nice instruction how to do this:

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite Pro A200 - cannot install Windows 7 cause lack CD/DVD driver

  Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I am trying to install Windows 7 but I can't go to step one because it is not found a driver:
  A message box saying: required A driver of currency for the CD/DVD drive is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now.
  -What to do?

  CD-ROM is a HL - DT - ST DVDRAM GSA - T20N ATA, the actual driver have version 6.0.6002.18005 (date: 2006-06-21)

  Best regards
  /Peter

  Hi Peter,.

  Try you to an upgrade from Vista to Windows 7 at the moment? If Yes, please try a new and clean Windows 7 installation. It work?

  Another question: your CD/DVD drive works properly or it appears with a yellow exclamation point in Device Manager?
  In your case, I would try to remove the drive from Device Manager, then restart the laptop. After that the drive will be recognized automatically.

• Satellite Pro A40 - cannot connect WIFI tstablish

  Hi guys

  I have a Satellite Pro Model: PSA45E - 0184H - EN

  Problem is I can not establish a wireless connection, the laptop can not be set automatically detect wireless networks?

  Any help would be appreciated.

  Thank you.

  Hi robs1971,

  Is your wireless network card equipped laptop? I ask this question because some Satellite Pro A40 models did not have WLAN features so I would be important to know if you have WLAN or not.

  Also check device manager if the wireless network card is installed correctly. Make sure that this latest WLAN driver is installed, and check the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  If WLAN network is within reach and SSID is not hidden the computer will automatically recognize. Then you need to enter the encryption key and that s all! :)

• Satellite Pro C50 cannot connect to bluetooth speakers

  Hi newbie here.

  My new computer C50 Pro Satellite laptop detects but does not connect to a new speaker Bluetooth in Cambridge or my iPhone, despite both being visible.

  Icons appear in devices Bluetooth, but with the orange warning triangle. Tried to download updates of b/t of Toshiba, no effect. (4 years old HP laptop works very well with both).

  Help?

  These speakers are not known to me, but generally, the connection is not very difficult.
  First you must make sure that BT is enabled in the settings Windows 8.1 (under PC & peripherals → Bluetooth)

  I guess you will have to press a key / button available on the speakers to start the pairing process.
  After that you should go to control panel → → its playback and should choose the BT speakers as the default device.

• Satellite Pro A200 - cannot start with new RAM

  I have two of these laptops, both purchased at the same time.
  I upgraded to 320 GB hard drive and tried to move the RAM to 4 GB as the spec States can be made.

  I used the recommended type of RAM, but the computer does not start with two RAM modules inserted. If I remove one of them, the laptop boots! I thought that I update the BIOS but found the only version available on the download web site is the same as I.

  Does anyone have an idea what could be wrong?

  What RAM you bought? I think that the modules are not compatible or your chipset does not support the 4 GB.
  Check it with CPU - Z!

  You could test the RAM with Memtest86 ([www.memtest86.com]).

  I doubt that a BIOS update will solve the problem. A more recent BIOS does not change the decision-making ability and/or supported RAM.

• Installation of WLAN Driver Satellite Pro A200 to WXP

  Hello

  I installed Windows XP SP2 for a client on Satellite Pro A200 (PSAE7E) and installed after is spoken in the German support hotline all drivers as in the test - instal .txt but I don't get the Atheros WLAN card to work.

  It is an ar5bxb72 of Atheros, but no way.
  I get all of the drivers in this list only works with the hardware, but not the card WIFI but I installed it in the list.
  Someone has a tip for me?

  Welcome them
  Marco

  Hi dude

  Are you sure that the laptop was equipped with the Atheros WLan card? According to some information that I found in the internet, this laptop comes with an Intel or Atheros WLan card!

  I checked the page Toshiba provides an Intel WLan Atheros Wireless Lan Client Manager and drivers. The Wireless Lan Client Manager is not the driver, but only the tool that helps you to configure your wireless network card and gives you more than the functions integrated configuration of windows configuration options.

  I recommend to download this portal Toshiba WLan WLan driver:
  http://APS2.toshiba-tro.de/WLAN/

  By the way; If you use XP on this laptop preinstalled Vista you will need to update the BIOS to version XP too!

  Greetings ;)

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Satellite Pro A200 - Wifi does not not after loading Win XP

  Hi, I'm new here and I apologies if this has been covered, I searched the Forum but came up to the top with nothing.

  I have a:
  Satellite pro a200
  Windows XP.

  My laptop was xp professional installed and the wifi on Board did not work.
  I had problems with the global laptop but the wifi worked. I formatted last night, installed a new copy of xp home and now wifi doesn't seem to be recognized. The light is on, the switch, but I can't get the laptop to recognize her here.

  I did not much I know, but I hope I can get it sorted.

  You have any questions, I will try and respond with as much information as possible.

  Thank you, my.

  Hello

  Please not that after the installation of Win XP, the BIOS needs to be updated!
  The Toshiba page should provide a special BIOS for Win XP OS update.

  A note of juice; the laptop could be equipped with different WLan modules and so you should be aware of chip right WiFi WLan card would not work if you try to install incompatible driver!

• Cannot install WinXP on Satellite Pro A200 - No. HDD

  Hello

  Please can someone help me. I just brought 52 portable Satellite Pro A200. They come with pre-installed Vista, but I want to wipe and install Windows XP. However, I have a big problem - when I put my XP CD in and start it, then click on enter to continue, he tells me that the Installation cannot continue until Windows cannot find any hard drives (although I can boot under Vista so I know that the HARD drive are ok).

  Thanks for looking,

  Matt Courtman
  Cromwell Community College, UK

  You must install the Intel Matrix Storage Manager.
  This driver can be found don page Intel:

  Please also check this thread. It s very useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• Satellite Pro A200: RIS installation fails - BSOD

  Hello

  Someone has already tried to use RIS for laptops Satellite Pro A200 ETA-1 image. I'm getting a BSOD which I think is due to a bad driver (downloaded from the Toshiba site).

  Also, can someone tell me where I can find a telephone number for technical support (UK), they seem reluctant to make available on their web site.

  Concerning
  Paul

  Hello

  satellite Pro A200 has the controller Intel AHCI-build. It is not included in Windows XP. You will get a bluescreen 0x0000007B proving that XP cannot identify the controller and has no driver for it.
  Here is a brief description of how add that driver to your RIS installation:

  1 copy all the single files from the Storage Manager Intel ICH - 8 M 32 - Bit floppy in your directory$ $oem $ \Textmode.
  If this directory exists you must change your txtsetup.oem file and add/extract the AHCI driver of the file txtsetup.oem of the F6 floppy in it (do not overwrite the txtsetup.oem file in this case!).
  If this directory does not exist, you can use the supplied txtsetup.oem file numodified.
  Download the floppy F6 Storage Manager here: http://support.toshiba-tro.de/tedd-files2/0/stormng-20070827133046.zip

  2. change your Winnt.sif file (or what you named your answer file) and add or change the following sections:

  [MassStorageDrivers]
  "Intel(r) 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M)" = oem

  [OEMBootFiles]
  iaAhci.cat
  iaAhci.inf
  iastor.cat
  iastor.inf
  iastor.sys
  License.txt
  Readme.txt
  Txtsetup.OEM

  If you have any questions do not hesitate!

• Slow WLAN connect to the router - Satellite Pro A200

  I have a Satellite Pro A200 - after starting the laptop she used to find the router wireless in good time, but now it seems to have slowed on the right and it may take a few minutes until 1/2 hour phone to find the router!

  This doesn't seem to be a signal problem because when the router is found that I get a signal strength full 5 bars. Connection to the laptop the router with a cable shows that no problem also that the connection and internet access is no problem.

  I do not understand why the laptop won't find the router faster and you would appreciate the help in the understanding of the problem and how to resolve the situation.

  I don't have a lot of technical knowledge so please keep in mind when replying

  Thank you

  Mike

  Hi Potter (maybe Harry?)  ;)

  You can easily find what WiFi card has been installed in your laptop.
  More details can be found in the *-> network adapters Device Manager *.
  Check this out and you'll know what driver WLan is required!

  _Regarding the question with your BIOS; _
  This error is known to me, always happens if you n t unpack the BIOS package correctly!

  What you need is a WinRAR or WinZip program.
  I prefer WinRAR and it helps to unpack all of the BIOS update.

  If you use the Vista operating system please check that another thread of forum on the same issue;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=123140𞄄

  Good luck

• Satellite Pro A200: How restart after hibernation

  I must be a fool.
  I put in power button new Satellite Pro A200 to activate the Hibernate.

  Then set the BIOS password. Despite the password entered correctly, it won't start windows.
  And can't stop laptop holding down the power button to force the reboot.

  Then
  (1) how to restart short waiting until the batterys flat roll... And
  (2) when and if I get a reboot, which key (s) should I hold down to get into the BIOS.

  Thank you much for the help.

  > Despite the entered password correctly, it won't start windows.
  > Nor can I stop laptop holding down the power button to force the reboot

  You have a Phoenix BIOS? If yes then you have to press the F2 key immediately after the laptop starts to access the BIOS. But you will not be able to access the BIOS, if the password is not right and cannot be verified.

  The unknown BIOS password can be removed only by an ASP in your country. There is a special procedure that is known only to authorized Toshiba service technicians.
  Therefore, follow the recommendation and contact guys!

  PS: The laptop must stop when you press the power button for about 4-5 sec.
  If not, unplug the AC and the battery to turn off the computer!