Satellite Pro C50 - How to extend desktop to 3 monitors?

Similar Questions

• Satellite Pro 4600 - how to extend RAM memory

  I want to increase the RAM in my old Satellite Pro 4600.

  -Someone could advise me which of the (actually existing) types of RAM cards are suitable?
  -The laptop has a maximum memory limit, or I can go up to 1 GB (for example)?

  Thank you.

  Of course, there are some limitations to upgrade!
  You can upgrade the memory on this laptop to max 512 MB (2 x256MB)!

  You can use PC133 144 pin SODIMM as mentioned modules [here: | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=28447&ft=m&st=3]

  Memory locations must be placed at the bottom of the unit.

  -Turn the computer
  -remove the screws which fix the plug memory module cover
  -slide you finger under the hood a lift it off.
  -mount the fittings of modules in connectors of computers at a 45 degree angle, then press the modules carefully to ensure a good contact
  -push the module down so it lies flat. Locks on each side will engage in the place to fix the module.

  All that... easy s ;)

• Satellite Pro C50-A-1E4 - how to merge partitions?

  My laptop is a Satellite Pro C50-A-1E4 running Windows 7 Pro 64 bit.

  In receiving a year ago, I replaced the hard drive with a 256 GB SSD. I partitioned in a 60 GB C drive and a 192 GB D the rest drive is the hidden restore partition.

  I have install all the software on C and my personal stuff on D.
  Now, the C drive is nearly full, but there are a lot of free space on D.

  Can you advise me how reallocate for example 20 GB from D to C with nothing to lose?
  I would like to make a complete backup of the drive D.

  Basic support for Windows (seems to me) to sit on a hard drive where the bottles must be adjacent, but I'm assuming that does not apply to an SSD.

  Any help and advice would be appreciated.

  Thank you.
  Harold

  Hello

  I recommend you to use a 3rd party software called Gparted.
  http://gparted.org/LiveCD.php

  Its freeware software that allows you to change the partitions on SSD or HARD disk.

  You can create a bootable USB flash memory key and might start Notepad to change the partitions.

  This s really great freeware software.

• Re: How to install Windows on the new Satellite Pro C50 8.1?

  I just bought a TOSHIBA SATELLITE PRO C50, that came with Windows 7 pre-installed.

  When you start the system for the first time, I simply close and put Windows 8.1 media into the optical drive (disc 1 of 4) then entered the Recovery Wizard and may have chosen the wrong option, because I completely erase the hard drive and partitions.

  Now that I did it, I can't find how to install the Windows Media Pro 4 DVD provided 8.1. I can't find the correct option to do this. I changed the startup option in the control panel by pressing F2 at startup, so it reads from the DVD player. The DVD starts but then takes me into a recovery area of the system, which is not good as I wiped the system completely.

  How can I just now to install the Pro 8.1 provided Windows on the clean system right now?

  Thanks for any advice.

  First, I would like to know what model of laptop you have exactly. If possible, please report the entire model number (C50-xxxxx). I just want to check the specification for this model of laptop.

  Did you buy this laptop as any new product and model in box?

  Anyway, if you have installation discs original recovery for this, you should be able to install it without problems. Start your laptop and press F12 to get into the boot menu. This menu wil shown on the screen, insert disc 1 into the optical disk drive, choose the CD/DVD drive from the menu, and then press ENTER.

  ODD must start reading Wizard disk / recovery will be shown o the screen. Choose the option to install out-of-box / factory settings and just follow menu on the screen.

• Problems of helmet speakers on dualboot Satellite Pro C50-A-1KV

  Hi all.

  I have a serious problem with Toshiba Satellite Pro C50-A-1KV. I have win7 x 64 and Ubuntu 14.04 x 64 on this machine. It was first installed Win7 and later Ubuntu 14.04.

  I tried to use the headset while I was logged on ubuntu and there is no sound, the sound was cut out of the speakers but headphones did not work, when I plugged it out I still have the sound on the speakers.

  After reboot I had no sound at all on ubuntu, and when I go to windows, the problem worsen for windows also. Right now it seems like some time the sound is on the speakers, but headset is dead, some time ago his headphones and speakers.

  I have no idea what is the cause of the problem. The win7 and ubuntu have been kept clean, only the updates have been downloaded. I think that the driver has some problems, but how could I make it work. To test, I tried to use Skype and there was a situation where I have the sound on the speakers and headphones, but then the microphone was death-_-'.

  I have a few pieces of it and the exact problem is on half of them. I have 2 deliveries.
  The first onewas ok, everything works. Either everyone has this problem :/

  I tried to make a backup on model where it is working and windows backup restore and install new ubuntu but it did not work.

  Any suggestions what may cause the problem or how to fix?

  I think you should first clarify whether your headset is OK.

  My theory is that your helmet could be faulty (maybe a broken cable or something like that) and that's why speakers and headphones will not work when the headset is plugged into the laptop.

  Laptop computer's headphones Jack supports a small switch that allows you to disable the speakers while the headphones are connected.

  If in case the headset is faulty, the speakers and the headphones would not work.
  So I think you should check the helmet first.

  If you are sure that the earphones are OK, then I think there could be a problem with the little switch in the headphone jack.
  Why? Because I can't imagine that this could be a software / driver problem because the same question is displayed using Linux as well as Windows System.

  The two systems are completely different and that a software / driver problem in both cases, it's almost unbelievable.

  However, I still recommend setting the laptop configuration using the procedure of recovery Toshiba in order to check if the noise problem using Toshiba preistalled system configuration and factory

• Satellite Pro C50 - A - screen Black/Brown problem

  Hi all

  I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.

  I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.

  Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.

  First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.

  The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...

  I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.

  * Are there known error, malware or fault in laptops that could help me? *

  I thank very you much in advance!

  To be honest I have don recovery think t install image will help you.

  I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.

  In the past, some people have reported on similar problems, and the reason was bad FL inverter.
  The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help.

• Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

  Hello

  I own Satellite Pro C50-A-1E2.

  Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
  I am trying to get into the BIOS but without success.

  I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

  I found this piece of information through Googling: "press f2, and then press power. But always without success.
  Help with my problem?

  Thank you.

  Hello

  Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

  Check it out.

  By the way: for some series laptop, press INS key then F2 worked too.

• Satellite Pro C50 keyboard problems - A - 1 L 6

  Hello

  I just bought this new Satellite Pro.

  I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

  I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

  I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

  And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
  .
  So, this is my first experience and unlucy in the world of Toshiba...
  Is there someone who can give me some advice to solve this problem?
  It may be a problem running on the new laptops, and someone knows how to fix this?

  Thank you very much!

  Hi guys,.

  As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
  I found the new BIOS for Satellite Pro C50 - A
  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
  Worth a try

  Another question: If someone has done to test a USB external keyboard?
  In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

• Satellite Pro C50-A-153 - Touchpad does not work properly

  First, sorry for my bad English.

  I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

  Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

  It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

  Can someone help me with this?

  Thank you.

  On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

  How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  Check it out.

• Satellite Pro C50 - A - speakers don't put muted when headphones are

  This morning my Satellite Pro C50-A-1E4 suddenly stopped, put Mute speakers when headphones are inserted. Previous messages solved this through a Realtek Control Panel that is not on my particular system.

  Hoping that the fix is easier just cannot find where to put the right parameters.

  Hello

  Usually when you connect earphones in sound properties > speakers of reading should be turned off and headphones must be listed as active.
  Just plug in the headphones and try to change these settings manually. Does not work properly when you do this?

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

  Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

  I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

  I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

  Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

  I have a Toshiba Satellite Pro C50 - A - 1 k 9.

  Thanks in advance.

  I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

  Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

• Re: Windows 7 on Satellite Pro C50-A-1HQ

  I have a Satellite Pro C50-A-1HQ with windows 8.1 and I'm pretty tired of this OS because of problems with the use of disc 100% that I get sometimes and I have not been able to solve.

  I would like to install windows 7 in this labtop. Do you know if there is a problem with that? Windows7 will work fully? I need to change anything before I install it?

  Thanks to you all!

  I don't know what can be wrong with the use of disk, and I hope that you tried to optimize version of the OS preinstalled.
  I visited the Toshiba download on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and I found all the drivers, tools and utilities for Win7 64-bit if your machine is fully supported. To be honest I think that your machine will work fine and stable with Win7.

  Before do you anything create recovery disk (DVD or USB) using preinstalled Toshiba recovery disc creator and you can use it at any time if you have notebook with factory again.

  See also http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

  If you have any other questions you are welcome.

• Should what ram I use in Satellite Pro C50 - A - 1 M 3

  Hello

  I recently bought the Satellite Pro C50 - A - 1 M 3. Reference number: PSCGKE-00M00GEN and since I have an old RAM stick from my previous laptop which is: Kingston, KVR1333D3S9 / 4G, 204-pin DDR3 SO-DIMM, DDR3 1333, Pc3 - 10600 CL9 204 pins

  I was wondering what would be compatible with my Toshiba laptop?

  Thank you for your time and your attention.
  Concerning
  Jim

  This unit manages the DDR3 SODIMM and these modules supports 204pins

  So I think your DDR3 SODIMM module could be compatible

• Satellite PRO C50-A-1E0 - failure of Windows 10 - now Toshiba Video Player is missing

  Hi all

  I've updated for Windows 10 drivers recommended by "Toshiba Service Station", all were successful outside of Toshiba Video Player. He said now "our product is not available for update!
  Any ideas? I can't download it anywhere, and the fact that I've updated for Windows 10 recovery isn't available to 8.1.

  Updates can be found here:

  http://win10upgrade.Toshiba.com/swup...=en&country=GB

  Kind regards
  Ian

  It's on my laptop Toshiba Satellite PRO C50-A-1E0