Satellite Pro L650 - 17 p - how to disable WIFI?

Hello

I have a problem with my new Toshiba Satellite Pro L650 - 17 p. I can't disable the WiFi with FN + F8. FN + F8 works only for Bluetooth, but not for the WLAN. WLAN driver (Broadcom) and value added package are the last of the Toshiba Homepage.
What can I do?

Thanks in advance
Senekha

Hello

Normally the WLAN card can be disabled if you press the FN + F8 key combination. Several icons will appear as Bluetooth, WLAN, shut it down, etc...
You see a symbol for the wireless card?

WLAN is working now?
You use the pre-installed Windows version?

If the wireless network adapter is listed in the Device Manager you must reinstall value-added package I think.

Tags: Toshiba

Similar Questions

  • Satellite Pro C850-15 t - how to disable the built-in speakers?

    I have a problem with my speakers. When I plug something like a helmet or a PA system speakers may stop working.

    I can hear both speakers, I mean the headphones does not work properly and the speakers as well. Can someone help me?

    Hello

    Usually, this should work automatically and when the external device is connected loudspeakers must be turned off.

    In any case, I do not know if this will help but try it.
    Open Control Panel and Manager Realtek HD Audio. I hope that you have it here.
    If Yes check it please, if you see the symbol small yellow folder on the upper right corner. Click on it and check the option to enable auto popup dialog box when the unit is plugged.

    Next time when you connect an external device choose option helmet and confirm with OK.
    That s how it works on my machine.

  • How to regulate the speed of the fan on Satellite Pro L650 - 15 c?

    I can regulate the speed of the fan in my laptop (Satellite Pro L650 - 15 c)?

    The reinstallation of Windows 7 the fan is always moving up. How can I set this fan?

    greeting of the developing countries

    Hello

    Open windows power management and settings for the management of the power supply you use. You will find the advanced power option. Open it and you will find Toshiba power saver options.

    Open all the available option and check the settings of the cooling method. Set to optimized battery option.
    This should reduce the speed of the cooling fan.

    Please test and validate the results.

  • Satellite Pro L650 - 1 L 4: battery will be discharged when the laptop is disconnected

    Hello together,

    I have a problem with my 5 month old laptop Satellite Pro L650 1 L 4.

    When the laptop is unplugged it will pay the battery. About 44% within 24 hours.

    Of course, options like BIOS "Wake we Lan ' and something like which are completely disabled.
    And of course the laptop is turned off completely and not the Sleep Mode.

    Any ideas?

    Kind regards

    Stephan

    Hello

    Please check if the wake-up on LAN is also disabled in the properties of LAN card (Device Manager-> LAN card-> properties-> Advanced tab).
    I also recommend checking the WLan card as well.
    Please also check if attached USB devices don't lose the power of the battery.

    But also a malfunction of the accumulator may be possible... so it has to be checked also...

  • Satellite Pro L650-1QG: incompatibility of keyboard key

    Dear audience,

    I am not satisfied by the keyboard of my Satellite Pro L650 1QG I5-4 settings.
    Before I had a Satellite S5200-701 that has worked well for almost 8 years after, I replaced almost any critical component to half-life.

    Finally the controller was unserviceable and last week the laptop worked no more after this problem has resided for six months but the laptop did not fail until last week prompted me to install and use my new laptop.

    I felt very comfortable with my old laptop and its parameters.

    However, the new laptop has an inadequate setting of its keyboards.
    "ALT GR" is replaced with my old keyboard and hold the 'CTRL' key has exactly the same position as on my old laptop so that it is possible that I write a 'CTRL-Q' when I tried to type 'ALT GR Q' or '@' which happens quite often and stops the program (EXIT).

    How can this problem be solved. Is it possible to get a fix? Either by replacing the CTRL key with a deaf person, or changing the configuration of the computer?

    I'm not sure I can adapt to this problem from any 'normal' keyboard is different and similar to my old laptop and work with a USB keyboard is no solution!

    Thanks, Headlost

    Hello

    > However, the new laptop has an inadequate setting of its keyboards. "ALT GR" is replaced with my old keyboard and hold the 'CTRL' key has exactly the same position as on my old laptop so that it is possible that I write a 'CTRL-Q' when I tried to type 'ALT GR Q' or '@' which happens quite often and stops the program (EXIT).

    I think that there are not many options for you you used a keyboard that has supported a different layout, L650-1QG supports the 102 (Euro) A4 + 10key flat standard black keyboard that can be different from the old Satellite 5200-701 keyboard.

    Don't know if you can replace the keyboards because of the measures so maybe one and the only option for you is the use of the external USB keyboard that would be similar to Satellite 5200 701 keyboard

  • Satellite Pro L650 doesn't get often from sleep mode

    Hi, I have a Satellite Pro L650, model No.: PSK1KA-00Y01E running Windows 7 64 bit.
    This laptop does not pick up often after mode "Eve".

    Can anyone offer suggestions on how to fix this?

    What's happening:
    When the computer sleeps, either by pressing the sleep button, or by closing the lid, this seems to work very well.
    After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.

    Most of the time the lights white led at the front displays for a few seconds and then started. Then, press us the power button and, often, the computer starts and says that Windows has been shut down incorrectly and then completely restarts for a new session.

    Sometimes the computer does not start, and it must cut off the power, then press the power button, which then crosses a full restart of the computer for a new session.

    A few weeks ago, we installed the latest version of the bios (2.20), and the problem persists.
    Is it a driver problem or a hardware problem?
    If it is a driver problem, what drivers should I try to install?

    Thank you
    Graham

    Hello

    > After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.
    This means that this problem is not always, but sometimes only and it of not possible to replicate this.
    In this case is not easy to find a good solution for this

    > We have installed the latest version of the bios (2.20) a few weeks ago, and the problem persists.
    > Is it a driver problem or a hardware problem?
    In my opinion, it could be a software problem. I mean that the problem could be related to corrupt the OS Win. Maybe the registry is confused upward. Usually, if the laptop is in hibernation / sleep mode, by pressing power button should the reactivation of the system in this mode and not shut down the laptop.
    So maybe this is s question OS

    If I understand your message, you have just updated the BIOS but didn't try the recovery procedure. Well well, for checking if the problem hardware or software s, you should get the phone to the factory settings.

  • Satellite Pro L650 series - the error screen white balance

    Hi all
    I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
    If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

    I have to restart my computer, and this problem can be solved.

    Is there anyone encounter this problem like me?
    Could you share to me what is the problem? and what is the solution for this problem?

    Thank you very much

    Hello

    Have you noticed this screen problem laptop with mains running or simply using the battery?

    I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

    In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

  • Cannot adjust brightness screen on Satellite Pro L650

    Hello
    I am running Windows 7 64 bit on my Toshiba Satellite Pro L650 and I cannot adjust the brightness of the screen. Fn + F6 key and Fn + F7 do not work and there is no entry for it in the control panel.
    I tried to download drivers VAP 1.4.1 as explained in Toshiba newsletter help, but there was no need for this template.

    Could you please help me with this?
    Thank you
    Stone

    Are you using the original OS that you got with your laptop or your own installation of the OS?

    As far as I know it should work with the settings. If you have changed something?
    You can use other fnctions FN?

  • Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

    A friend Satellite Pro L650 having worked well until yesterday, all of a sudden turned itself off. Now, at startup, it lights up normally for about 10-15 seconds before turning off suddenly. Turned off, the DC in white/blue LED and the orange Power LED Flash on a broad set of intervals of approximately one second. This extinction happens if I leave Windows or press F2 to enter the BIOS setup.

    I guess this blinking is intended to serve as a kind of diagnostic code, but I have yet to track down what it means. Can anyone help?

    To avoid confusion, power without the product stack the same, sudden stop experience, except the two LEDs remain solidly lit this time. With or without battery, trying to turn on again immediately after that a shutdown produced no response at all. Remove the power cable and immediately it reconnect again and turn then produced a brutal power off, but in less than 5 seconds. More wait between attempts to market seems to give a little longer powered on State, but without fault, the machine turns off just suddenly. With its short time 'turned on' we are talking, there cannot be any kind of thermal protection?

    I had an old Satellite L450D lying around that uses coincidentally the same AC PA-1750 adapter, but use it made no difference. Of course, the battery does not have the L650!

    The only previous numbers, that I am aware of this machine have been intermittent case of Windows reporting "Plugged in, not charging", but as my friend use it exclusively on the network, it was not a problem.

    Your thoughts will be greatly appreciated...

    WTF?

    What is an unmoderated forum?

    Can someone help with my problem?

  • Upgrading RAM on toshiba satellite pro l650

    I have 2 toshiba satellite pro l650. first of all an i did a RAM upgrade 8 GB (2 x 4 GB DDR3 1066 MHz Kingston) 1 year ago and work. Now, I would like to upgrade to the other laptop. I bought 'Impact HyperX HX316LS9IBK2/8 2 x 4 GB 1600 MHz CL9 SODIMM 1.35v DDR3L' but do not work! I thought that they were defective and I branch "QUMOX 8 GB (2 x 4 GB) 204 pins DDR3L-1600 SO-DIMM" but also these don't work on my toshiba! Why not work? What can I do?

    I presume that there is compatibility problem. Best thing you can do is to use two identical RAM modules.
    Can you please put name of full model of your laptop so that we can check what RAM modules are 100% compatible.

  • Satellite Pro L650 - 1 CG-output HDMI not working not

    Laptop: Toshiba Satellite Pro L650 - 1 CG, Intel i3 - 350 M, ATI 5650, 4 GB RAM, 320 HARD drive

    When I connect my laptop to my HD Toshiba TV and select 'Connect to a projector', all I get on the TV is a black screen.
    Catalyst Control Center can 'see' the TV and I can adjust the options of resolution for both screens, but no matter what options I try, I can't the TV to show a picture / sound.

    The TV is obviously detected SOMETHING, because it goes from a blue screen to black. Device Manager, I can see the HDMI Codec but even though he says he is activated, I can't put it as default. It says below that it's 'unplugged', and when I run the HDMI control program, it says "To use the HDMI control, you must activate it".

    I have all the latest ATI drivers / sound, as well as virtually all the drivers up to date there. In addition, there is nothing wrong with the cable or my TV, my PS3 is using the same connection.

    Hi were reluctant,

    Normally, you can switch between monitors or switch to an external monitor only when you press the FN + F5 key combination.

    In addition, I would recommend turning on the external monitor first, then switch on the laptop. You can also choose the right channel to HDMI in on your TV. Then, press FN + F5 to switch to your TV.

  • Satellite Pro L650 - 1 L 4 - values of the display panel

    Please could someone tell me the specifications/characteristics of the area of display in the Toshiba Satellite Pro L650 - 1 L 4, mainly the values for brightness!

    I want to buy exactly this phone and also need to use outside, so brightness is really important! I've already found a few values for the L650 - 15 p, but they were really bad, and I hope that they are not the same for all types of the L650...) :

    Thank you

    Hey,.

    I found the exact product specifications on German
    Toshiba http://de.Computers.Toshiba-Europe.com/innovation/Product/Satellite-Pro-L650-1L4/1094127 page:

    As you can see the screen 15.6% and a screen resolution of 1,366 x 768 with LED background light.

    All that s what I could find.

  • Satellite Pro L650 - hard disk is not initialized.

    Hello

    I have a Toshiba Satellite Pro L650 and I am having some problems.

    It all started a few weeks ago, I received the dreaded screen black death (windows could start, but then just came up with a black screen and a cursor. After playing well, I thought that a reinstall of windows would do the trick.

    It worked, but none of my pilots have been installed... After much research, I found my Toshiba repair disc. I put in and went to fix it. At half way through formatting the drive, it came with an error, saying that he was unable to delete a specific file, it asked me to reset.

    So I reset, and it came with a screen with "this disc is not initialized, Please initialize now."
    So I pressed Yes, and it resets, it came with the same screen. and again and again.

    So that's where I am. It is only a year old, and already got the replaced disk. I'm desperate difficulty, I don't want it to become a grammage of paper-dear...

    First of all I m wondering why the message appeared saying that the disk is not initialized have you used the Toshiba restore for the OS installation disc or have you used any other Windows disc?

    On the other hand, it might be possible that your HARD drive is malfunctioning, the cursor blinking in the upper left corner is a sign for this fault
    So I recommend you to check the HARD drive. Use a tool like Drive Fitness Test, for example, it helps you to check the HARD disk
    If errors will be displayed so the HARD drive needs to be replaced

  • Satellite Pro L650-1LP - changing language in the OS Win 7

    Hello

    I have a Toschiba Satellite Pro L650-1LP with the Polish version of preinstalled Windows7.

    I want to have an English version. I understand that I must make a recovery disk and that re - install the system by choosing the language English, but I hate that job where I can take my laptop and do it for a reasonable price?

    Thank you very much
    Kasia

    > I understand that I must make a disk recovery and re - install the selection of English language system
    That s bad. Laptops are specific to these countries and offered products in a country specific language only on that your recovery image there is no multilingual option.

    All you can do now is to do clean install OS using installation disc original from Microsoft with the Windows version English or install the Language Pack Microsoft on existing windows.
    In any case, prior to change what any create recovery disk. You can use this disc a day if you want to have once again the factory settings.

    If you have any other questions you are welcome.

  • Satellite Pro L650 - network driver Pb after re - install Win7

    Good afternoon.

    A laptop computer was infected with a virus, so I re - install Win 7.
    My problem is that all network devices don't have 'no driver for this device.
    I install the drivers I download, but the problem is the same.
    When I view the list of devices, the 3 devices 'unmanned' are:
    -Network controller
    -Ethernet controller
    -Controller PCI (for simplified communications)

    When I view hidden devices, I see 8 network cards "Miniport".

    Please, help me...
    Thank you.

    Best option for you is to reinstall Windows 7 using original recovery image (operating system) you got with your laptop. This recovery image contains all the necessary drivers for all hardware components.

    You have installed the Win7 clean version, right?
    What Satellite Pro L650 you have exactly (L650-xxx)?

Maybe you are looking for