Satellite Pro L850 - 1 P 8: Assistant BT does not recognize Atheros AR946x

Similar Questions

• Satellite Pro U400-18 needs - Win8 drivers - microphone does not work

  I HAVE a PORTABLE Satellite Pro U400-18 a PSU45E computer AND I INSTALLED WINDOWS 8 64 bit BUT I can't FIND the DRIVERS WINDOWS 8 FOR MY MICROPHONE. (AUDIO DRIVERS)

  PLEASE CAN SOMEONE HELP? Thank you

  There is no special driver for microphone.
  Audio driver controls the microphone and the noise.

  By the way: what mic do you mean? The intern who belongs to the webcam?
  Only the microphone is working correctly by using an external headset?

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.

• Satellite Pro 6100 - after updating the BIOS, it does not

  Hello

  I am trying to upgrade my old of Satellite Pro 6100.

  I started to upgrade the Bios via download from Toshiba (using WIN) site - OK downloaded zip files and installed, machine then stops. Problem, it does not restart - it's so now I have a laptop 'death' that is not responding to any key I tried.

  Any suggestions of resuscitation?

  Already I've updated from XP to SP2.

  Thank you

  Paul

  Hello

  It sounds like that the BIOS update has failed and your laptop can start t again. But try this workaround:
  Remove the AC adapter and the battery and then wait an hour. After that reconnect the adapter AC/DC and battery. Try to start the laptop.

  If it doesn t work I think that the motherboard needs to be replaced or you go to an authorized service provider. Technicians can reflash the ROM module
  But maybe you can find a motherboard of second hand cheap on eBay

  Good bye

• Satellite Pro C660 - Synaptic Touchpad pinch zoom partially does not work

  Hey there,

  The laptop I have is a satellite pro C660 2I. I've had my laptop for a year (ish) now, and he always had this 'problem '.

  The touchpad has the ability to "pinch" which allows the user to zoom in or out using 2 digits on the touchpad (i.e. move the fingers together to zoom out).

  Unfortunately, the touchpad recognises 2 figures as being present when I use only one finger, but only when I use the right side (or two-thirds of the pad from the right).

  This made me think that maybe he was dirty, greasy etc so I cleaned and nothing has changed. I tried to uninstall the driver, reinstall / update... nothing. The strange thing is that it seems to work for approx. 1 second after I apply pressure to the left hand side in a movement of friction and then use the right side. This leads me to believe that the left side is * being constantly recognized as in use even when it is not *, but I don't know why.

  I do that anyone can recommend?
  Open the laptop and clean it?
  A component failed to be replaced? A software update?

  I'm at my wits end with this laptop, and this is the only problem... is so constant now that the pad is almost unusable (deepened over time, but it wasn't a big deal at first).

  Thanks in advance,
  Griff

  NOTE: If there are all the technical information required, please treat me like a cave man / technological invalid. I am somewhat qualified but I would rather patronisingly simple instructions as sending unnecessary information to those who are trying to help me lose some time.

  Perhaps your question describes isn't related to a dysfunction of the touchpad, but on the fact that the touchpad supports the dual mode functionality.

  + How do I enable or disable the Touchpad double mode +.
  http://APS2.toshiba-tro.de/KB0/HTD9702NL0000R01.htm

  Check if there is a difference with the touchpad on or off dual

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Satellite Pro A120: After upgrade Vista control volume does not work

  Hello, can help them.

  I have a satellite Pro A120, and because I used the upgrade disk to upgrade to Vista, I was not able to control the volume button on roller on the front of my laptop.

  I see that someone has posted a repsonce for someone who uses an A100 series, but value added package for the A120 doesn't include this utility.

  Thank you

  David

  Discovered since I posted this question, by downloading the latest sound card driver, I can now control my sound on the roll switch on the front of the machine, but there is no display appears on the screen, as he did with XP.

• Satellite Pro L300D - TOSHIBA DVD Player fails and does not

  Hello, I have the Toshiba Satellite Pro L300D, and I'm having a problem playing DVD on it. When you put them in the drive, it tries to load the DVD player, finally fails and says "DVD Player does not. If you try to load the DVD in the player it will freeze at 50% of the time,

  DVDs are fine, legal, were played on a DVD player and another computer without any problem. CD works fine in the same drive of my L300D.
  A popular entry.

  Hi lindag,.

  Is it so when you try to play DVDs with VLC media player?

  What you could also try is reinstalling DVD Toshiba playback software. You can download the latest version on the Web from Toshiba site:
  http://EU.computers.Toshiba-Europe.com
  ?

• Satellite Pro L20 - right button on the touchpad does not work

  I have a Sat Pro L20.
  When I press the right button on the touchpad, nothing happens. The left button works fine.
  I checked the properties of the mouse left button is set as the main click with the right button, defined as the secondary click.

  Thank you.

  Hello

  Maybe the touchpad button has a physical malfunction.
  But first of all, you can try to reinstall the driver for the touchpad. Check if the resettlement will change something. But the truth; I don t think this will solve the problem. Anyway, try is free, you know.

  But if that does not help so I think you need to replace the touchpad.

• Satellite Pro L20 PSL2YE: 1 GB Ram upgrade does not show in the Bios

  I just bought a 1 GB mem stick samsung 4200 s 533 mhz for my L20.
  It does not show in the Bios or in the main menu in Device Manager, but it shows in cpu - z and pz Assistant 2007.

  I am very confused, and upgrade the bios on toshibas website does not include one for the base PSL2YE L20.
  I wonder if all the bios upgrades L20 will work with my machine.

  any help would be great because I am so confused,

  Hello

  If you already have a biosupdate on your machine? It s a bit confusing that you´re confused since I was wondering what do you say with
  "toshibas Web site does not include one for the base PSL2YE L20". Do you mean the bios?

  Please give some feedback.

  P.s.: you can also try this site for a biosupdate:
  http://209.167.114.38/support/download/ln_byModel.asp

  Maybe you will find something.

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed

• Satellite Pro A-153 C50: F11 function key does not work

  The F11 key where I can spend the sound power switch does not work!
  The other keys work correctly.

  Everyone knows how to restore its function?

  Hello

  You use the special function or Standard F1 - F12?
  The special mode of operation allows you to use special features without pressing the FN key.
  This means that if the special function mode, you must press only F11 to turn the sound on and off. In the case of special function mode is off, you must press FN + F11 to turn the sound on and off.

  You can enable or disable the special function mode in:
  Office-> Office help (in the task bar)-> tools & utilities-> function key

  But I wonder if the F11 key works with other software?
  For example: pressing F11 key while using the Internet browser (internet explore) should allow mode full-screen. You can check this?

  Keyboard F11 key is maybe defective and so the sound ON / Off function does not work

• Satellite pro 6100: DVD - ROM SD - 2612 C does not work properly

  Hello!

  The image flashes with the ordinary WinDVD.
  When I install the interactual Player 2.7 real. (I was very happy with version 2.0 on my old toshiba laptop for win98), the same phenomenon occurs, too - but there is no sound at all...

  Interesting fact: DREAMWORKS Animation Film "Over the hedge" works without problem screen at all, but: no sound...

  does anyone have an idea?

  A download?

  Thank you!

  Hello

  Have you tested WinDVD player with several different original DVD movies?
  Check it!

  You should also test different DVD player. I recommend VLC Player. It's free!

• Satellite Pro A300-1E7 - USB Sleep and charge does not

  Hello

  I tried all the settings I can think off, but I can't seem to get the USB sleep and work load. My OS is Windows Vista Business SP1.
  I tried the mode 1, mode 2, unchecked power save all the boxes in hubs usb root, legacy usb support turned off but still the load stops when I put the laptop to sleep.

  Someone at - it a solution?
  Thank you

  Hello

  NOT all USB ports provide the features of sleep & Charge.
  THAT the USB port with the little icon flash supports the costs of sleep &.

  So I recommend you to check if you have used the correct USB port!

  Cheers mate

• HP Officejet Pro 8600: Upgrade to Windows 10 and does not recognize the printer scan function

  What should I do to get my scanner to work with Windows 10?

  Hello

  Re-install or update software and driver help. But what is your HP Officejet Pro 8600? HP Officejet Pro 8600 - N911, it must be* where * can be from a to z.

  Kind regards.