Satellite Pro M30 problem of hibernation Mode

Similar Questions

• Re: Satellite Pro M30: cannot enter hibernation mode or standby

  I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
  Now I can not access the 'characteristics of hibernation or standby.
  In addition, shortcut keys are inop.

  When I go to programs, utilities Toshiba the only option available is SD memory card format.
  I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.

  Can anyone help me with any of them?

  Hello

  For me, it looks like you don't have Toshiba drivers all installed and necessary.
  Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?

  Please note that the common Module are very important!
  You must install this software first!
  The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!

  On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
  Follow m this and I sure will get you everything works again!

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Toshiba satellite pro m30 USB problem

  I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

  Hello

  could you describe the difference between the original USB cable and the USB extension cable?

  The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

  To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

  Also, you could test whether USB, the same problem occurs with other cables.

  Bye Bob

• Satellite Pro M30 modem problem

  I have a portable Satellite Pro M30 and I try to install the modem driver. Everything is ok, but the modem has problem. In Device Manager, it seems to be fine without conflicts. Each time than trying to query the modem of the property page, it shows me a message concerning the opening of port.

  I read a lot of articles and I thing the problem, this is the version of the driver. The driver that I use is the SM2138ALD04 version. Have any ideas?

  Hello

  I agree with you, I found also several threads to have reported similar problems with modems
  No doubt this procedure will help you:

  -go to the Device Manager and remove and uninstall the modem driver
  -Download the latest modem driver
  -restart the OS and reinstall the modem

  Please report did it

• Satellite Pro M30 - NVIDIA graphics controller problem

  Hello everyone

  I have a Toshiba Satellite Pro M30 with a Nvidia GeForce FX graphics controller. ([Image of the motherboard | http://i258.photobucket.com/albums/hh242/hardousss/PC3.jpg])

  My problem is when I turn on the PC and wait a few seconds red and white vertical stripes begins to appear on the LCD and it cannot go after the BIOS password screen. I can type the BIOS password but when I hit OK or button that ENTER the laptop freezes. ([See image 2 | http://i258.photobucket.com/albums/hh242/hardousss/PC2.jpg])

  In very rare occasions where the laptop was turned off for a long time, I listen to him on and he could overcome the BIOS password screen but freezes after a while: ([see Image 3 | http://i258.photobucket.com/albums/hh242/hardousss/PC1.jpg])

  I plugged it to an external monitor and nothing has changed.
  I removed the inverter (responsible for the lightning of the LCD screen) and the problem is still there.

  Always to blame the graphics chip from NVIDIA.
  I read here that it is not possible to replace them because they are soldered to the motherboard. But I want to, where can I get a laptop NVIDIA graphics chip. They sell somewhere?
  I have a friend who works in an electronics manufacturing company (SAGEM) and told me that they have the tools needed to replace any piece on any Board of Directors.

  Thanks in advance for any help.

  Hello, my friend

  I agree with you. It must be a faulty graphics card. I put t believe you can buy a graphics chip separately but you can buy mainboard used laptop on eBay. In my view, Exchange Board is no problem for you.

• Satellite Pro M30: connection problem!

  Hello

  After I connect to the Internet via modem, the machine (specifically, the status bar) freezes. In addition, could not start the MSN (6.2). After about 10 minutes, the system works normally and very well. Help, please!

  Data sheet:
  Satellite Pro M30
  Centrino 1.6
  Windows XP, SP2

  Kind regards

  Hello
  check your XP firewall settings?

  If the firewall is active, no program could pass the wall!

  Good bye

• Satellite Pro M30: Computer does not enter standby mode

  Hi all

  I have a Satellite Pro M30...

  When my computer is in stand-by or is closed, the first keeps flashing orange led and it refuses to start. It reboots only when I unplug the connection and remove and replace the battery several times...

  Anyone knows what is the cause of this and what is the long-term solution?

  Longesson...

  Hello

  As far as I know the light glow orange or flashes while the battery is charging. If it of impossible to turn on the device while the battery is charging so in my opinion, there is something wrong with the electronic power to your laptop.
  You should contact the service partner for help.

  Good bye

• Satellite Pro M30 graphics works not when the driver is installed

  Hi all

  I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

  I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

  It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

  Can someone help me?
  [email protected]

  It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

  In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

  I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.

• Keyboard unresponsive - Satellite Pro M30

  Hello

  I recently bought a Satellite Pro M30. The keyboard responds more fully. When I turn on the laptop and when it ask me to login credentials I'm simply not able to enter, nothing happens when the buttons are pressed.

  I have re-installed the unit using the CD of restoration but no luck. Interestingly, when I put the laptop in sleep mode, and when she returns to the normal mode, the keys work for a few seconds. If I kill the explorer.exe and launch a new, key works also for a while.

  Because the keys work when the computer comes out of standby, the keyboard is not completely dead/failure. My OS is XP Pro SP2.

  Help, please.

  Thanks in advance,

  Sanjay Kay

  Hello

  The best way to check the functionality of the device is to preinstall the original recovery CD or DVD unit. As I see you have already done this.

  If the problem persists, I suppose that there is a hardware problem. I put t know if the unit is new or used one, but you should contact the customer Service of your country partner and explain the situation. Guaranteed valid will cover all costs if some of the material is defective and should be replaced.

  Good bye

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite Pro M30: Needs to win 7 SD card reader driver

  Hello

  I've updated my old Satellite Pro M30 of Windows XP to Windows 7.
  Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones but do not work.

  I downloaded those from Toshiba, but when everything is installed and I put the SD card, I and alert on Device Manager that says "conflict resources" error code 12.
  Toshiba SD Card Controller Type A
  Toshiba SD memory card reader

  What is the right driver? PLEASEEE

  > Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones, but do not work

  Win XP drivers do not work with Win 7, but you should try some drivers for Vista.
  Try some drivers released for other series...

  Also try this:

  You can go to Device Manager-> properties-> Details tab SC card reader

  You can find something like that.
  PCI\VEN_1217 & DEV_7120

  FRI means provider
  DEV: device

  Then, you can find the identification numbers using this database of the PC:
  http://www.PCIDatabase.com/

  This help to find the pilot!

• Satellite Pro M30 - compatible DVD players

  Hello

  I have a Satellite Pro M30 and the optical block has problems, recognizing most of my DVDs.
  I want to change the drive, does anyone know which are the models compatible with this machine?
  The real player is Toshiba DVD - ROM SD-R6112.

  Thank you
  Daniel

  Hello

  As far as I know this unit has DVD +-R/RW (DualDrive) and in my opinion the best solution is to swap it with the same. On this way, you will be sure that everything works correctly.

  Unfortunately, there is no public document on the hardware upgrade and just Toshiba service partners can tell you more about it.

  Good bye

• Satellite Pro M30; BSOD: 0X000000F4

  I have a Satellite Pro M30 PM715. I installed Windows XP Professional SP2. The problem is that I have random BSOD. Most of the time is a daily BSOD... I did a virus scan and nothing was found.
  Do you have any ideas about this?

  Hello

  I found an interesting document from Toshiba on their homepage "information" updated Microsoft Windows XP SP2.

  Go to http://eu.computers.toshiba-europe.com

  then download and drivers and choose your machine.

  In this document, we could see the Driver after the upgrade to SP2. Maybe if you bring drivers and tools updates your BSOD is gone!

  Bob

• Satellite Pro M30: buttons on the front don't do media control

  Buttons on the front does nothing when the machine (satellite Pro M30) is disabled or order the multimedia. Is there something I need to do to configure, or is it a hardware failure?

  Hugo

  Hello
  to perform the General music in "offline" mode, I pushed and hold down the Mode button until the blue LED on the CD symbol lit up on the front.
  After that I inserted a music CD, and portable he played very well in "offline" mode

  But this time I had to study the manual actually.