Satellite Pro M30 graphics works not when the driver is installed

Similar Questions

• Satellite Pro M30 - WLan does not work

  My Satellite Pro M30 laptop is about 5 years old and is a refurb. Until yesterday, my wireless connection was very good. Although my wireless connection is running with high speed and it is connected, I now cant get on the internet without using the ethernet cable.

  It is certainly a problem with the laptop itself.
  A framework has changed (perhaps with a function key?) or the internel wireless card packed.

  Can anyone suggest anything I can try with the laptop first before you buy an external wireless card?

  Thank you.

  I don't think there is that you can do.

  The wireless network card appears correctly in Device Manager.
  Make sure that the wireless network card is enabled correctly (FN + F8).
  There may be a problem with the WLAN antenna. Who knows?

  Anyway, if you can't get this to work once again use small USB WLAN adapter and be happy.
  To be honest, is not bad idea because new USB WLAN glue can work with G WLAN or even N. The original WLAN card in your notebook is, I guess, old A/b.

  Good bye

• Satellite Pro M30: Computer does not enter standby mode

  Hi all

  I have a Satellite Pro M30...

  When my computer is in stand-by or is closed, the first keeps flashing orange led and it refuses to start. It reboots only when I unplug the connection and remove and replace the battery several times...

  Anyone knows what is the cause of this and what is the long-term solution?

  Longesson...

  Hello

  As far as I know the light glow orange or flashes while the battery is charging. If it of impossible to turn on the device while the battery is charging so in my opinion, there is something wrong with the electronic power to your laptop.
  You should contact the service partner for help.

  Good bye

• My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

  Hello can anyone give solution to my problem.

  my iPhone touch 5 works not when it is in locked mode and it's time all incoming call came the touch works do not. other times, the touch works normally wat is the problem. ?

  If you disturb not activated. Settings > do not disturb.

• Contact ID works not when the iPad 9.7 Pro is supported

  My iPad running iOS 9.3.1 Pro 9.7 is only a few days old and working perfectly except for one question...

  When connected to the charger the Touch ID does not recognize the fingerprint to unlock the device.  As soon as I unplug the accusations, everything works well again.  I've already talked to Apple, however, we thought that resetting factory solved the problem, but in reality all that has changed is that the charger As disconnected.  Before going back to Apple once again, I thought I would check with the experts.  :-)

  Thank you...

  various reasons are cited-

  1 low power mode

  2 electrical interference

  3. no standard charger

  Not sure, there is a unique solution

  iPhone 5 s Touch ID does not not then plugged on charge, charge.

• Venue Pro 11 on screen keyboard works not when the keyboard of the Tablet is connected

  I know that we are aware of this problem:

  When the lid of the keyboard of the Tablet is returned to the back of the shelf, they keyboard does not. but windows 8 still recognizes its connected and the screen keyboard it does not automatically jump upward.

  The Surface and the RT Nokia tablet correctly, both work. It's going to be a fix for this in the future? Is this a software problem or a problem with keyboard? It's really a big problem that needs fixing because it let the unusable keyboard cover. I am seriously considering to take the Tablet back because of this problem. Any information would be appreciated.

  There is already another thread on this - please check it and close this one as replied.   Thank you.

  http://en.community.Dell.com/support-forums/mobile-devices/f/4586/p/19535674/20497309.aspx#20497309

• Satellite Pro L10: CMOS clock stops when the OS is not running

  Hello

  We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
  Any advice would be great.

  See you soon
  Paul

  Hello

  Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
  In this case the CMOS battery needs to be changed or maybe only removed for awhile

  If your laptop is 18 months, the guarantee must be valid.
  Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).

  In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.

  Good bye

• Satellite Pro M70 usually power up when the AC

  Hello

  I bought my dad a Satellite Pro M70 for his birthday and it was used for about 3 months. All of a sudden without any reason that it not power up if it is not connected to the AC. The battery registers itself as 100% charged.

  When on AC, everything is fine no problem.

  But when it is not plugged into the AC, it lights. When put under tension however you can unplug the AC and it will all work very well again.

  Any ideas?

  Should I try a BIOS update? or does anyone have any other suggestions?

  Thank you
  Martine

  Hello

  This problem appears at the beginning?
  Sounds a bit like electroninc power supply malfunction and in this case, you should always ask the service provider to Toshiba for assistance.
  Don t worry, seems, the guarantee is valid and each procedure must be done for free.

  But I m interesting if this will help you:
  Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
  Check this option.

• Satellite Pro P100 - sound does not when I try to use Gentoo

  Hi guys,.

  I have a Satellite Pro P100 (model: PSPA4E). I tried to get Gentoo working on it, but can not get the sound to work. In my attempts to get the operation, I've upgraded to v3.5 (some recommended forum) Bios. The sound still does not work.

  Has anyone got the same laptop and managed to get the sound to work? Or can someone advise me.

  Thank you.

  Hello

  How you try to do a little sound? With alsa? Usually you must first compile your kernel for alsa soundcard and support you as a module, then alsa can load this module when you run alsaconf user-space to configure your sound card.

  I had gentoo on my server before migrating to ubuntu server edition and I find after working with several systems of derivatives, and bsd linux gentoo is too complicated, especially regarding him emerge and trees.
  I tried to install software that was not in the portage tree correctly and the path is too long for some external incoming traffic software.
  Then based on debian.

  Welcome them

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro U400-247 - noise static when the AC adapter is plugged

  Hello

  I got by Satellite Pro U400-247 and you have a problem with the sound.

  Everytime I plugg in adapter (external power supply) there is a kind of droning noise static noise when I use the audio out (headphones).

  Does anyone have a solution for this problem?

  Thank you
  Marcus

  Hello

  I guess that's not happed running the laptop on battery only. Right?

  I think that this issue is released to a grounding problem.
  I read different forums on this kind of question it.
  Usually use the 3 cord power cable should help get rid you of this noise.

  In your case I would recommend asking for cord 3 power cable (maybe you need another adapter that supports the 3-wire power cord) to a Toshiba authorized maintainer.

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• Help! JavaScript works not when the object is moved from one page to the other!

  Hi all:

  I am new to Adobe Livecycle Designer (version 8.0). I created an interactive pdf form of 3 pages with many objects (text fields, radio buttons, drop-down lists, etc.), our company wants to quickly start to use.

  I'm having trouble with some of my Javascript does not not with some of my items on page 2 of the form. Specifically, there is a drop down menu to "Country" on page 2 of my form. When the user selects, for example, 'United States' in the list, I have the Javascript code that is supposed to change the 'currency' list drop-down to "Dollars" rawValue accordingly (on the change event).

  I think that my Javascript syntax is correct, but I am not sure. Here's my simple Javascript associated with the "Country" drop-down list (Note: rawValue 80 = 'United States' and 105 rawValue = "US $"):

  -

  ---

  Form1. Page1.cmbContactInfoCountry::change :-(JavaScript, client).

  ---

  If (this.rawValue == 80) {}

  cmbCurrency.rawValue = 105;

  }

  It sounds pretty simple and it WORKS when my "Country" drop-down list is moved to page 1 of the form, but it WON'T WORK when I move the combo box "Country" return to page 2 of the form (i.e. where it belongs).

  Anyone has suggestions or solutions? I spent probably 6-8 hours of racking my brain trying to figure out why it works when on a single page, but it does not work when to move to another page. I guess I can have corrupted something OR that I not address fully the proper name of the object?

  Help, please!

  Frustrated and helpless, near Chicago.

  Taylor T

  Yes, it's a quirk of... in the drop-down lists when you select an item in the DOF it is not committed until you exit the field, unless you do the following:

  If (this.boundItem (xfa.event.newText) == 1) {}

  cmbCurrency.rawValue = 1;

  }

  ElseIf (this.boundItem (xfa.event.newText) == 2) {}

  cmbCurrency.rawValue = 2;

  }

  The xfa.resolveNode stuff was not necessary that both objects are of the same subform, and as such can 'see' each other.

  Think like a folder structure subforms - elements can see what is in their own folder but will say where to find things in other folders. If cmbCountry was subform1 and cmbCurrency was so in subform2 that rawValue above lines would look like:

  subform2.cmbCurrency.RawValue = 1;

  It's a good idea to name all your objects, subforms, etc. it is to work with script is much easier - so you won't have to deal with things like these pieces of xfa.resolveNode you had before (as well). He ones because you have more than one subform called "subform", the number of hooks is the Instance number (when you have several of the same object) if the program has to differentiate between the various "subform".

  The number of instance come in handy, but for things like the rows of the table and so on when you need to make calculations.