Satellite Pro P300 - always 1 is displayed using the numeric keypad

Similar Questions

• Satellite Pro P300 always try to boot first from CD/DVD

  Hello world

  I have a problem with my laptop Satellite pro p300 PSPCDE: my OS is on my HARD drive (hdd1 with a ssd and hhd 2 is empty).
  In the bios on the boot sequence, I have just put (my ssd) first HDD1, HDD2 (which is empty), then drive diskette, then LAN and cd/DVD, but when I start it, it always try first to read the cd/DVD (with the horrible sound of the cv/dvd when it tries to start on it) and finally it starts on the HARD drive.

  Why is he trying to boot from the cd/DVD? I don't understand, my bios version is 3.4.
  I am now on W10 x 64 pro, but the problem was the same with win 7 pro.

  Help me please!

  No one to help me?

• Satellite Pro P300 restarts a few minutes after the stop

  Hello

  I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!

  The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).

  Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?

  Paul

  Where are you trying to download the BIOS?
  I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  To be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
  Check it!

• Satellite Pro P300 - 13 M - how to replace the network card?

  Hello I have the Satellite Pro P300 - 13M.

  My sister fell on my UTP cable and so he was taken out by force and because of that "holding-pings" on the front of the port are bent or broken, so whenever I put in a cable with traction slightess or accidental poke I'm new offline...

  I'm out of my warranty period, is it possible to fix this? Can I replace it myself?
  USB network adapters are a viable solution to replace if I can't replace it?

  Help > _

  To resolve this issue, you must replace the motherboard. The network card or a network location is soldered on the motherboard and cannot be traded.

  In addition, it would be not covered by warranty. This isn't a matter of Toshiba, this is caused by the customer.

  However, if you want to repair you must contact an ASP or search you on eBay for a card mother of second hand.

• Cannot use the numeric keypad codes alt with usb keyboard.

  I just bought a bow of Microsoft keyboard for use with my Vista system. As I am a programmer and the keyboard is missing a number pad (which I use frequently for the entry of characters alt-code), I bought a USB keyboard separated (from Targus - model AKP10CA) mainly to enter alt character codes

  To my dismay, the alt codes don't work! I checked the keycodes that sends the keyboard with a keylogger, and they are the correct numeric keypad keys. So my question is why these don't work with my Microsoft Arc keyboard alt key, and what I can do about it?

  Thank you.

  Well, at least we have excluded the keyboard as the problem - I don't really think it was but it was worth checking out.

  I don't know (I don't use keyboard shortcuts), but have you tried turning on the number lock on your keyboard and using the numbers on the different keys on the keyboard that are used instead of a numeric keypad when you don't have available?  I don't mean the numbers at the top (I know that they do not work) but if you set the keyboard for some keys work as a numeric keypad, and then perhaps shortcuts using these buttons by activating the NunLock will work as expected.  Always turning on one off the NumLock sort of defeats, the goal to make shorter (but it can work entirely from the keyboard that was your question).

  I do not think it is possible to get this work because the keyboard and the numeric keypad USB are separate devices and do not speak to one another - can 'see' what is happening on the other device and there is therefore no way to make them work in oncert.  The system does not recognize that the two entries are supposed to actually a single action and I don't know any way to tell the system how to do if it is possible at all (even with a registry change).  I have no idea where to start comiing even upward with a workaround.  I think you just need to live with the fact that you can not use the devices together to issue commands.  Maybe you can change some of the most frequently used shortcuts involving the keypad for a different shortcut, not requiring that the keyboard - shortcuts can be re-scheduled (and if you can not re - schedule a current shortccut you ccan still create a new shortcut using only the keyboard, which performs the same function).

  I'm sorry, there is no real solution to your problem, but it's the way Vista works and we just have to live with it, the better we can.

  Good luck and best wishes!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• T420s: how to use the numeric keypad #?

  Do not really understand how to use the numbers on the numeric keypad.

  Please advice where I can find them?

  FN - J - does not work

  Activate the numeric keypad by pressing Fn + NmLk.

  Then you have access using the number keys.

• Satellite Pro A300: No volume indicator displays on the screen

  Hello

  I have a Satellite Pro A300 with a volume knob. When you change the volume to use, it works (even if this does not work as the starting system which is really annoying, especially when you turn it on every day in a library) However there are usually no witnesses screen to show at what level the volume is at. Once, I saw a display flag which seemed to be apart Toshiba Hot Key Utility but it disappeared again after a reboot.

  It is really impossible to do not be able to see at what level the volume is such that you change. Can someone help me out here? Brands goes for anyone who can help me unravel so volume level start!

  Hi CiRi,

  try to use the "Fn + esc" key to cut your system...
  He will remain silent even for restart the computer...

  If none of the keys have a special feature of "Fn" reinstall the 'value added package' and 'hotkeys' of the toshiba download page.

• Satellite Pro A120: Is it possible to use the docking station parallal port

  Is it possible to use a docking station usb with a parallel port on a satellite Pro A120, which has no parallel port.

  Therre is a BIOS setting, or is it not supported?

  Hello

  What USB docking station do you mean exactly?
  I found a camera and it seems that it s compatible with all satellite units.

  But please post one exactly USB docking station number.

• Satellite Pro 2100 is hot when you use the knee

  Hello.

  I have a 2100.
  I started using it again after using it not for a few months.

  I noticed when it is sitting on my lap if feels very hot and the fan comes on a very large number.
  The problem is that I don't remember if it was always like this or if it's a recent thing.

  Anyone know if this is normal behavior or the computer can run a bit on the warm side of the signs?

  I have don t wonder that temperature increases when using the laptop on the lap.
  The fact is that the cooling modules are placed in the bottom of the laptop and you would clutter the cooling fans using the laptop on the lap
  I recommend to use the notebook on the desk and leave enough free space around the unit.
  Last but not least, you should check if the fans are not clogged with dust and debris.
  In most cases the dust prevents the cooling fans work properly and this leads to a higher temperature.

  Clean the cooling modules with a jet of compressed air, that you can buy it from the other computer dealers or online.

  See you soon

• Satellite Pro A200GE and WXP - can I use the PSAE7 drivers or it won't work?

  The performance of Vista business makes me crazy, I need to go back to XP + sv pack 2.
  If I format my machine (A200GE) and install XP. can I use the drivers for the PSAE7? (or that the A200GE is PSAE7E this solution will not work?)

  Also do I need to contact microsoft to return to an earlier version of windows from my new vista Business edition? everything seems quite unclear.

  Thank you very much
  Dave

  Sorry, but A200GE is unclear to me. Can you please check the description of the model, and after the right.

  On the label located on the lower part you can see this number PAXXX. It is recommended to use the drivers listed for the model you own. WXP on laptops Vista is not optimized and best you can do is to only use the drivers for your laptop.

• the mouse keys. Tour of the mouse and use the numeric keypad instead. Does not work...

  I need to use the mouse instead of a mouse pad.  I followed the instructions on both pc to get the keyboard to work like a mouse, but it won't work.  What I am doing wrong?  I can't have sticky keys to work as well.

  Hi Carolynmarcel,

  1. Who is the manufacturer of your laptop?
  2. The num Lock is off?

  Follow the steps in the link that will guide you to control the mouse using the keyboard below.

  http://www.Microsoft.com/enable/training/windowsvista/MouseKeys.aspx

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite Pro C50: Installation of Win 7 using the UEFI boot mode

  I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - comes with 8 win), but I want UEFI boot, with GPT partitioning.
  I'm happy wipe existing partitions if that solved the problem.

  I have disabled _have_ Secure Boot.
  Win 8 install DVD boot works;
  CSM boot and boot from Win 7 DVD works - but this is not what I want.
  Definition of return to the UEFI boot and install Win7 boot media - hangs on "Starting Windows" screen
  Media _is_ good, works well on the PC manufacturers.

  I'm not convinced that it is a problem of Microsoft.

  Hello

  On Toshiba laptops, where the UEFI BIOS is available, it of necessary to disable secure boot and change the boot to the CSM mode in order to boot from external sources and install systems other than Win 8 or 8.1 Win

  Of the workarounds in the internet described the installation of Windows 7 in UEFI mode but I doubt that this will be possible on Toshiba laptops because the BIOS is different and modified for each series of laptop.

• What RAM is compatible with Satellite Pro P300?

  Hello

  I have the Satellite Pro P300 (PSPC1E - 002002GR).
  What are the specifications of the RAM?

  Currently, there are 2 GB of RAM
  I want 4 or 8 GB of RAM.

  I have this possible?

  Greetings

  You can upgrade the RAM to 4 GB of RAM
  So you can use additional DDR2 667 MHz 2 GB RAM module (i.e. PA3513U-1M2G).

  Specifications are:
  DDR2 SODIMM 667 Mhz PC2-5300
  Pins: SODIMM 200
  Voltage: 1, 8V

• Satellite Pro P300-19 q - keyboard problem

  Hello

  I bought a * Satellite Pro P300-19 q * laptop and got the shipment yesterday. I am happy with the features and performance of the laptop. It has a keypad as well. The problem is the key board sinks and rises all the keys the keys (lower-right). I feel like its not secure properly. The key to this place Board feels fragile and irritating during use. Even some of my laptops at low prices to friends do not experience this problem. I can't live with it like that because it's a new laptop.
  Is there a solution to this problem?

  Thank you
  Ravi

  Hello

  Satellite Pro P300 I almost three months now and I can confirm that keyboard on this area is not stable on the other side, but it moves when I press with very great strength. Typing normal I do not use so much force and I have very sensitive keys. Just give a contact, and the symbols are on the screen. I use laptops for a year now and type on the computer keyboard is different as standard desktop with large and robust keys keyboard.

  To be honest, I don't see any problem here. Maybe you use to force much press. If you check the mechanism under the keyboard protects it's so small and sensitive, and you can press the keys very gently.

  So for me there is no problem at all. If you think that the keyboard should be more service contact stabile and explain the situation.

• Cannot install recovery image on satellite Pro P300-1EX

  Hello.

  I have never had many problems with a single laptop in my lifetime of work. I'm almost ready to throw this thing out the window. I have a satellite pro p300-1EX.

  I wanted to do an install new os just to make things a bit faster for the customer, it was 8 hours ago.

  First, I installed a Home Windows OEM pre 32B version. Then I saw that the CD would not work.

  So, Okay - I'll bring back factory default:

  (1) there is no link repair starting and pressing F8
  (2) there is no HARD drive untilty when you press 0 - that does nothing
  (3) there is no recovery console, by putting in an OEM version of windows vista
  (4) I try to download recovery disk creator bloody software and get this - it does not work. It creates a shortcut to a file that's not here yet. TRDCLcher.exe, can you, im speechless.

  So now, I have to spend £30 of my own money by obtaining a disc sent to me? I don't think so.

  So, what can I please? It was a horrible experience. Nothing works. The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it. Instealing the OEM deleted all tools by default, but I can't NOT THE DOWNLOAD.

  Please, please help me.

  Thank you.

  Hello

  Maybe it sounds stupid now, but this is simply.

  Here's my explanation of how it works:
  Almost 4 or 5 years Toshiba offers laptops without recovery DVD but with recovery image stored on the HARD drive. As much I know about former Satellite/Satellite Pro P300 recovery image was recorded on the second partition of HARD drive in the folder named HDDRecvery. This model laptop was shipped with Windows Vista.

  As you know original recovery image can be installed n in two ways:
  -You can use the recovery HARD drive installation method - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  -You can use the created recovery DVD disk

  HARD drive recovery facility can be made if the laptop has only factory settings. In this case in advanced startup options (F8), you will have the option to fix my computer. If the notebk has been installed with the version of the OS or any other operating system of this option won't be available more. Because of this Toshiba has preinstalled reminder with the message for owners of laptops create recovery DVDs.

  Your questions:
  > There is no link repair starting and pressing F8
  If this laptop doesn t have to factory settings it will not appear in the advanced startup options
  > There is no HARD drive untilty when you press 0 - that does nothing
  If you have European book this model with zero will not work. It only works with the United States and Austraian mobile.
  > There is no recovery console, by putting in an OEM version of windows vista
  I put t understand it. What happens when you start with the OEM version?
  > I am trying to download bloody recovery disc creator software
  If you have the European model of laptop, it can not be downloaded. This piece of software is included in the recovery image only.

  > So now I have to spend £30 of my own money by obtaining a disc sent to me
  I understand, but at least with the original recovery DVD you can install OS and all necessary things in an hour only.
  > The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it.
  Yes. Without factory settings you will not have access to these data.

  Follow these steps:
  -start your laptop and press F2 to enter the BIOS settings
  -set the BIOS to default settings and reboot the laptop
  -When the laptop reboots press F12 to get into the boot meny
  -When the boot menu appears on the screen put the original DVD of recovery in ODD
  -Choose the CD/DVD drive on the list and press ENTER
  This will force it's STRANGE to be the first boot device and you should see process on the loading screen. Click next or OK nothing change and wait for the recovery procedure starts.

  Please try it and let me know exactly what is happening.