Satellite Pro P300: Error after installation of battery 8.00.02 BT WIN 7 32-bit
I upgraded my Satellite Pro P300 Vista Win7 Pro 32-bit.
The programs and existing drivers had (compatibility) problem with Win 7 whitch is indicated when installing Win 7 Pro 32-bit.
So I download and install this new battery.
In the peripheral equipment there are a 3-port BT. But the software (settings, communications, etc.) does not start...
for example: BtAssist.exe - failed to execute (Dutch: toepassingsfout), may not start successfully this applicaton (0xc00000be, click Ok to exit).
Someone at - it ideas?
Everything worked fine before installen Win 7.
Thanks already
Eric
Hello
You did a clean install of Windows 7, or you have upgraded the Vista to Win 7?
I recommend a new installation of Windows 7. It's better, because an upgrade from Vista to Windows 7 could leave some junk on the HARD drive and some tools/drivers Vista is not compatible with Win 7 OS.
So to do a clean install of Windows 7, then download and install the new BT stack from this page:
http://APS2.toshiba-tro.de/Bluetooth/
Good luck
Tags: Toshiba
Similar Questions
-
Satellite Pro P300: Error TOSHIBA recovery disc creator
Hello
Having just received my P300, I tried to create a backup using the TOSHIBA recovery disk creator.
After having inserted a 4.7 GB disc in the DVD drive and backup, while she was refused, a message pops up saying:"Cannot read the following file:
F:\blahblahblah
Error code: bonnefin
Failed to create the Recovery DVD 1 "It is clear to me that there was not enough memory on the disk it ends. The size of the disk had also declined about 0.5 GB.
My main question is:
Do you need to use a DVD-R disc or a DVD + R disc? In addition, is a panasonic disc disc the best type to use?Help, please.
Thanks, JoeC.I agree with Akuma.
The problem of compatibility between the DVD and the CD/DVD burner can cause this error.
One of my friends had a similar problem. He tested two different brands of DVD and both were not fully compatibleAfter the use of the TDK DVD-R, it could burn the image and could create the recovery DVDs.
Therefore, it would be desirable to test various media in order to solve this problem.
Goodbye & good luck
-
Occasional Satellite Pro P300-1FP - gel during video playback
Hello forum,.
I have a laptop Toshiba Satellite Pro P300-1FP, age about 4 years old.
Running Windows 7 (32-bit version).
An occasional but annoying problem: when playing video, from time to time the whole system freezes. Sound continues to come from the speakers, but it is usually either an idle down & distorted version of what I should be heard, or a noise buzzing/scream loud, repetitive.
System retrieves ever - only freezes completely, unresponsive, frozen display, the mouse pointer moves, etc.. Have to restart every time.
Anyone know what could be the cause of this & how can I fix this?
Thank you
Alan.As far as I know SP P300 works well with Win7 32 bit. My brother has the same machine and use it with Win7 too. We checked often performance with different games or playing different videos, mostly from avi or mpeg files. Also very good race and YouTube videos smoothly, so I really don t understand why you have this problem of gel.
Have you installed the Toshiba download page display driver?
HARD drive is extremely busy before that happens?The same thing happens when you play games?
-
Satellite Pro P300-1bd - no parts sound dolby after recovery
Hello
I bougt garage a toshiba satellite pro P300-1bd. With this laptop, it has Dolby sound piece on the pc.
I installed my P300-1bd with the recovery with XP disc. I've updated the pc with windows vista Enterprise edition.
Before installing, I had an excellent sound quality, with a good bass.
Now after you recorey, the sound is very bad.
I installed the drivers for the card's audio fr.
But, what should I do to get my good his return.
I can't find sound on the internet room so that I can install it. But I don't know if that's the problem.Can anyone help me to get my perfect his return.
Thank you in advance.
Post edited by: melina
Hello
The European driver Toshiba page provides two audio Conexant drivers for this model of laptop.
+ Driver sound + 4.36.10.0
+ Driver sound + 4.83.1.0I recommend the new version 4.83.1.0
Uninstall the old driver first in the Device Manager.Restart the device and install the new downloaded drivers.
Hope this helps to get better sound quality :)
-
Satellite Pro P300 restarts a few minutes after the stop
Hello
I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!
The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).
Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?
Paul
Where are you trying to download the BIOS?
I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversTo be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
Check it! -
Satellite Pro P300 - screen remains blank after power on
My Toshiba Satellite Pro P300 power on, the screen remains blank.
Can someone please help?
Looks like a FL. inverter problem
I doubt that you could replace is it s a job to a service technician.
The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog -
Re: Microphone completely after installing XP on Satellite Pro P300
My father bought a Satellite Pro P300 that I went down to Windows XP by using the included CD/DVD.
Later, we found that the internal microphone is very quiet when we tried to use it.
We need to yell into the microphone to get any sound at all, more like sounds random blip. Type the microphone sounds more scratch.All other sound effects are great. speakers work fine. We connected an external microphone to the mine in the laptop and video calls worked without problem, the problem is only with the internal mic.
I saw that someone else has the same problem in the forum (link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=33844&tstart=0]), but it does not say how or if this problem has been resolved.I would really appreciate if someone could give me the fix or a link to the fix to our problem other than plug in an external microphone.
Hello
Windows XP supports a microphone amplifier. Have you enabled it?
Go to control panel-> Audio & Sound Devices-> advance tab press Volume button
Optionally, select advanced controls
Then you should see the volume of the microphone. Please set it to a higher value.
In addition, press the advanced under the microphone button.Here, you can mark the micro amp.
Concerning
-
Satellite Pro P300-1BD - installation of inappropriate language
Hello
I have a Satellite Pro P300-1BD
On the first start, when install us Vista (OEM Business), we made a mistake, and we choose the wrong language (nederlands and we would be in french)
How is it possible to fix this?I tried to make a recovery dvd, but this dvd only propose language Nederland to restore.
I tried to start on recovery of HARD drive, but when I press F8 at startup, do not start the recovery process
THX
Hello
> When you first start, when install us Vista (Business OEM), we made a mistake, and we choose the wrong language (Korea? s and we would have French) how is it possible to fix this?
I suppose that it is no longer possible.
As far as I know the other languages are locked or deleted, and you will be able to choose only the Dutch as language.If you need the recovery in French disc, then you will need to order on this page:
https://backupmedia.Toshiba.EU/landing.aspxGood bye
-
Updating the BIOS is dead the satellite Pro P300-1AY
Hi all
found this forum and really hoping that he can help me!
I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!
However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!
But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!
And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.
Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
Ty for your time in reading :)Hello
> Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
This version is available for Toshiba FSA.So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
Eventually, after this update the specifications would be stable.Good luck
-
Satellite Pro P300 LED to the bizarre behavior
I have a portable Satellite Pro P300-1AY, bought just for more than a year. A few hours before after saving my galleries of photos on my external hard drive, a function LED (located below the touchpad) began to blink once every 2 seconds and has done since then. I can't say I've noticed this before but maybe I'm a bit on the side hypersensitive and prudent? I've never had a system failure (yet) or any error message telling me that something is wrong in particular.
Unfortunately I don't know quite what this led to specific standards for, no power supply mains or battery either. The hard disk activity? More likely.
As indicated, perhaps I am worrying for no reason, but it's not something I picked up before and it doesn't seem to be anything on a Google search that describes something like that.
I appreciate any comments on this one.
Best regards
Gavin
Be cool and watch what happens the next few days.
Let us know if the same thing will happen tomorrow. -
Satellite Pro P300 just died on me
Hello
Yesterday my Satellite Pro P300 (PSPC1E) died just the'm... no battery charging lights nothing. Nothing happens when I press the power button it is DEAD.
The battery was ok last time used, the adapter is still give me almost 20volts.I took the laptop goes to check the DC in connector, it's ok.
I guess that, after some research, it is a fault of the motherboard. In general my warranty missed 2 months ago!
A new motherboard replacement so far here quoted costs £180, not too eager to pass that as I have a tax account at the end of this month!Any ideas of what could be the problem?
I found a mobo on eBay which is a course of p300-1 to 8 for a song, but which would be compatible?
What are all the variations in motherboards?
Any other motherboard would be compatible?All ideas, suggestions would be much appreciated, and I thank everyone in advance for ideas.
See you soon
SteveI think motherboard is dead too. My brother had a similar issue when he wanted to connect the external HARD drive.
Simply, there is an electro shock and from that moment the cell phone was dead. No reaction at all. Drive external HARD even was dead and it smells like burned plastic.Anyway, if you want to have the same hardware, you can buy identical mainborad of a PSPC1E model.
-
Satellite Pro P300 - his axe with Win XP installed
Starting with Satellite Pro P300 with VISTA everything was fine including the sound.
For other reasons, I'm back to Win XP and noise started to sputter and example music was chopped.
After you have installed the latest driver everything was going well again, at least for a few days.The same error came once again, starting with a chopped sound when starting Win XP. Reinstall the latest version of the driver does not help.
Is anyone able to give me a hint?
Thank you
BenjaminHave you checked the sound settings in Windows? Maybe there's something wrong.
You have installed the latest driver on the Toshiba site?
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversTry to listen to music with another player for example VLC media player.
Make sure you have all the updates for Windows installed. -
The new use of recovery of Windows XP with my q Satellite Pro P300-19?
I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »
My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?
Any help would be welcome.
The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.
Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.
If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
Follow the instructions on the screen and the laptop will also reinstall.
But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
This is the content of the Windows XP Recovery disk. -
Satellite Pro P300 has NO stereo Mix in Vista with Realtek sound card
Hello.
I have a P300 with Realtek internal sound card and drivers updated.
I NEED a stereo mixer in the recording devices, but I currently get only a MIC input, even after checking "Show offline and disabled devices."Yes, I updated the drivers HD Audio of this site Web and Realtek and still nothing.
The only other thing that could affect this, but I don't see how I use ASIO4ALL drivers audio in conjunction with the Realtek drivers.I'm running Vista 32 bit Edition Home Premium
your
Hi mate
I confused m do you know why?
Because you talk about audio driver Realtek and sound chip and my knowledge, that the Satellite Pro P300 was equipped with the audio chip Conexant!It s NOT the Realtek chip! It s Conexant!
According my Conexant audio chip experience can't stand stereo mixer in the recording devices!
Good bye
-
Satellite Pro P300 - 23L - horizontal lines on the taskbar
I have a portable Satellite Pro P300 - 23L.
Last night it suddenly appeared, about 30 horizontal thin white lines on the taskbar (actually on the bottom half inch of the screen).
The top 3 or 4 of these lines seem to pulse in a fast and regular way.Now, I can barely see the icons in the taskbar, or the button to start in the lower left corner.
I read on another forum that the problem may be due to a problem of "grounding".
The charger plug is actually broken and repaired the wiring myself, but that some time previously, so it is possible that a connection is loose or is now was something shorting causing this effect.I had to order a new charger but in the meantime would appreciate any assistance in order to confirm or deny that this could be the problem.
Any advice on how to remedy this?
Hello
If the problem would be with the power adapter this lines should NOT be visible using the laptop with the battery. Right?
Therefore, it would be really interesting to know if the same lines are visible if the AC adapter is not plugged in.But I think that this is unrelated to the power adapter. In my opinion its a display issue or a graphics card problem.
Therefore, you must connect an external monitor to check it out.
If the same lines are visible on the external monitor, the graphics chip is assigned the case, it could be a display problem.
Maybe you are looking for
-
How can I configure an apple tv 4 with iPad personal hotspot or wifi router?
I try to set up apple tv with iPad personal hotspot but it didn't wotk Apple tv still cannot connect to the network I need to connect only via a wifi router?
-
^^ explained in the title
-
Hi all I'm trying to find a Wav file to use at the end of a LabVIEW program that prompts the user that the test is over. I use the LabVIEW VI but I'm looking for a pre recorded the wav file that reads "Test is now completed. I have had a look on Gool
-
file transfer: How can I send all my files from my office text to my laptop please
Hi responds to Microsoft How can I send all my files from my office text to my laptop please. Thank youJO
-
Disassemble a rocket - all words of warning?
I want the digestive tube of my Séverine Fuze V1 brand new body of a new transplant V2 rocket. I would like instructions for ppl who dismantled the "rocket" and who know how to do it properly with words of warning if necessary. Keeping the back? The