Re: Microphone completely after installing XP on Satellite Pro P300

Similar Questions

• Unknown devices after installing Vista on Satellite Pro U200

  Yesterday, I installed vista ultimate, but unfortunately my U200 is not compatible with vista because the tile would make me believe.
  What does not work I have identified to date:
  -Speakers and headphone jack
  -Function keys
  -Fingerprint reader

  Almost any of the included toshiba software installs even after disabling "control of Application Security."

  Does anyone know where I can get the new drivers and software or when they become available?

  Otherwise really like Vista. It is very reactive and simplifies many tasks. This is very pretty too, but this isn't my priority.
  Any help gratefully received
  See you soon

  This might help others with similar problems. I was able to get evrything working except my shortcut keys.
  http://www.csdsupport.Toshiba.com/TAIS/CSD/support/windows_vista/vista_beta.cgi?lsAction=list_files&model_id=30

• Satellite Pro P300-1bd - no parts sound dolby after recovery

  Hello

  I bougt garage a toshiba satellite pro P300-1bd. With this laptop, it has Dolby sound piece on the pc.

  I installed my P300-1bd with the recovery with XP disc. I've updated the pc with windows vista Enterprise edition.

  Before installing, I had an excellent sound quality, with a good bass.

  Now after you recorey, the sound is very bad.

  I installed the drivers for the card's audio fr.
  But, what should I do to get my good his return.
  I can't find sound on the internet room so that I can install it. But I don't know if that's the problem.

  Can anyone help me to get my perfect his return.

  Thank you in advance.

  Post edited by: melina

  Hello

  The European driver Toshiba page provides two audio Conexant drivers for this model of laptop.
  + Driver sound + 4.36.10.0
  + Driver sound + 4.83.1.0

  I recommend the new version 4.83.1.0
  Uninstall the old driver first in the Device Manager.

  Restart the device and install the new downloaded drivers.

  Hope this helps to get better sound quality :)

• Satellite Pro P300 - his axe with Win XP installed

  Starting with Satellite Pro P300 with VISTA everything was fine including the sound.

  For other reasons, I'm back to Win XP and noise started to sputter and example music was chopped.
  After you have installed the latest driver everything was going well again, at least for a few days.

  The same error came once again, starting with a chopped sound when starting Win XP. Reinstall the latest version of the driver does not help.

  Is anyone able to give me a hint?

  Thank you
  Benjamin

  Have you checked the sound settings in Windows? Maybe there's something wrong.

  You have installed the latest driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Try to listen to music with another player for example VLC media player.
  Make sure you have all the updates for Windows installed.

• Satellite Pro P300-18 - canoe install WIn XP for lack of HARD drive

  I just got a Satellite Pro P300 18 with VISTA pre installed.
  I need to install XP Pro on it, but when I start installing XP Pro from the CD, it says it cannot find any hard drives.

  Is that any body can help me?
  Some of my software works or not or could not, t install under VISTA, so I really need XP on the new laptop computer.

  Kind regards

  Hello Tino

  Yes he'll see.

• Satellite Pro P300 - what is the maximum RAM I can install?

  What is the maximum RAM you can install in the PSPCDA-01L00D Toshiba Satellite Pro P300?

  It is not listed in the specifications.

  Hello!

  It seems therefore that the laptop is already upgraded to the maximum RAM.

  I think that 4 GB of RAM should be sufficient for all applications on a laptop at the moment. :)

  Good bye

• Satellite Pro P300 restarts a few minutes after the stop

  Hello

  I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!

  The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).

  Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?

  Paul

  Where are you trying to download the BIOS?
  I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  To be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
  Check it!

• Satellite Pro P300-1F1 - how to install a second HDD?

  Hello

  I would like to install a second hard drive to my Satellite Pro P300-1F1.

  I would like to know if I need a "cellar" special to set the hard drive inside the Bay? Where could I get such a thing in Germany (near Cologne)?

  On the inside of the drive Bay cover HARD are four plastic pins that are so long that it is impossible to close the cover when a hard drive is built in.
  What I have to just shorten or do I need a new cover or pins work like a kind of attachment?

  Thank you very much for your help!

  Is there a connector from the HARD drive in the second span?

  If this isn't the case, then you can not install a HARD drive in any case. The second span is because he shares a common design with models that have a second HDD of the factory.

• Satellite Pro P300 - install the graphics driver

  Hi all

  This is my last resort before I throw this laptop through the window - and it is a gift for someone for Christmas.

  I recently bought a Satellite Pro P300 - model PSPC1E-005008EN, 2 GB RAM, 17 "display and Intel GMA X 3100 video card.

  As a very experienced engineer, same one that makes me tear my hair out.

  When the bike video car is installed with the ATI drivers what we call, or drivers intel I get an error 12 code saying there are not enough resources to launch pilots.

  When I discovered the Device Manager with the hidden devices turned on that I have 2 video cards, 1 that works properly and 1 in the error state.

  I uninstalled the drivers, all the video cards software related and reinstalled all, or just the drivers and still no joy. I have a laptop that shows no model model of monitor or video card in display properties and the resolution doesn't go above 1024 x 768, and the image is so bright.

  Can anyone help?

  Hello!

  Your P300 has an Intel GM965 graphic card so I put t know why you want to install ATI drivers?

  I think the best way is to reinstall Windows with the Toshiba recovery disc.

  Or you try the graphics driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Normally when you purchase a Toshiba laptop do not install some drivers or utilities from Toshiba, it s all preinstalled.

  Good bye

• Is it possible to install Vista 64-bit on Satellite Pro P300-1CS?

  Is it possible to install vista 64-bit on the Satellite Pro P300-1CS?
  Best regards
  DUP

  Hello!

  It should be possible to install Vista 64-bit on the laptop but I could be that you will get not all drivers.
  For now, doesn t support and 64-bit drivers Toshiba offers but you can search on other sites:

  Here are some examples:
  -Intel chipset: [www.intel.com]
  -Realtek sound chip: [www.realtek.com]
  -WLAN driver: http://195.182.196.33/wlan/
  -Bluetooth: http://195.182.196.33/bluetooth/

  Good luck!

  Good bye

• Satellite Pro P300 - impossible to activate the built-in microphone

  I bought a Satellite Pro P300 some 2 months and so far so good.

  It has a webcam which I really thought that I would have any use for it but now find that I have.

  The camera works fine but I cannot activate the built-in microphone.

  Can someone point me in the right direction please

  Hello

  You will need to start the webcam software if you want to use the internal microphone too.
  The point is that the internal MIC is connected with the internal webcam and webcam software handles both devices.
  Also check if the internal mic has been correctly enabled in the webcamsoftware

  In addition, I would recommend updating the audio driver.

  Best regards

• Satellite Pro P300: Error after installation of battery 8.00.02 BT WIN 7 32-bit

  I upgraded my Satellite Pro P300 Vista Win7 Pro 32-bit.
  The programs and existing drivers had (compatibility) problem with Win 7 whitch is indicated when installing Win 7 Pro 32-bit.
  So I download and install this new battery.

  In the peripheral equipment there are a 3-port BT. But the software (settings, communications, etc.) does not start...

  for example: BtAssist.exe - failed to execute (Dutch: toepassingsfout), may not start successfully this applicaton (0xc00000be, click Ok to exit).

  Someone at - it ideas?
  Everything worked fine before installen Win 7.

  Thanks already

  Eric

  Hello

  You did a clean install of Windows 7, or you have upgraded the Vista to Win 7?

  I recommend a new installation of Windows 7. It's better, because an upgrade from Vista to Windows 7 could leave some junk on the HARD drive and some tools/drivers Vista is not compatible with Win 7 OS.

  So to do a clean install of Windows 7, then download and install the new BT stack from this page:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good luck

• Cannot install recovery image on satellite Pro P300-1EX

  Hello.

  I have never had many problems with a single laptop in my lifetime of work. I'm almost ready to throw this thing out the window. I have a satellite pro p300-1EX.

  I wanted to do an install new os just to make things a bit faster for the customer, it was 8 hours ago.

  First, I installed a Home Windows OEM pre 32B version. Then I saw that the CD would not work.

  So, Okay - I'll bring back factory default:

  (1) there is no link repair starting and pressing F8
  (2) there is no HARD drive untilty when you press 0 - that does nothing
  (3) there is no recovery console, by putting in an OEM version of windows vista
  (4) I try to download recovery disk creator bloody software and get this - it does not work. It creates a shortcut to a file that's not here yet. TRDCLcher.exe, can you, im speechless.

  So now, I have to spend £30 of my own money by obtaining a disc sent to me? I don't think so.

  So, what can I please? It was a horrible experience. Nothing works. The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it. Instealing the OEM deleted all tools by default, but I can't NOT THE DOWNLOAD.

  Please, please help me.

  Thank you.

  Hello

  Maybe it sounds stupid now, but this is simply.

  Here's my explanation of how it works:
  Almost 4 or 5 years Toshiba offers laptops without recovery DVD but with recovery image stored on the HARD drive. As much I know about former Satellite/Satellite Pro P300 recovery image was recorded on the second partition of HARD drive in the folder named HDDRecvery. This model laptop was shipped with Windows Vista.

  As you know original recovery image can be installed n in two ways:
  -You can use the recovery HARD drive installation method - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  -You can use the created recovery DVD disk

  HARD drive recovery facility can be made if the laptop has only factory settings. In this case in advanced startup options (F8), you will have the option to fix my computer. If the notebk has been installed with the version of the OS or any other operating system of this option won't be available more. Because of this Toshiba has preinstalled reminder with the message for owners of laptops create recovery DVDs.

  Your questions:
  > There is no link repair starting and pressing F8
  If this laptop doesn t have to factory settings it will not appear in the advanced startup options
  > There is no HARD drive untilty when you press 0 - that does nothing
  If you have European book this model with zero will not work. It only works with the United States and Austraian mobile.
  > There is no recovery console, by putting in an OEM version of windows vista
  I put t understand it. What happens when you start with the OEM version?
  > I am trying to download bloody recovery disc creator software
  If you have the European model of laptop, it can not be downloaded. This piece of software is included in the recovery image only.

  > So now I have to spend £30 of my own money by obtaining a disc sent to me
  I understand, but at least with the original recovery DVD you can install OS and all necessary things in an hour only.
  > The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it.
  Yes. Without factory settings you will not have access to these data.

  Follow these steps:
  -start your laptop and press F2 to enter the BIOS settings
  -set the BIOS to default settings and reboot the laptop
  -When the laptop reboots press F12 to get into the boot meny
  -When the boot menu appears on the screen put the original DVD of recovery in ODD
  -Choose the CD/DVD drive on the list and press ENTER
  This will force it's STRANGE to be the first boot device and you should see process on the loading screen. Click next or OK nothing change and wait for the recovery procedure starts.

  Please try it and let me know exactly what is happening.

• Many BSOD after installing Samsung SSD 840 pro in ThinkPad Lenovo R60

  Have an old Lenovo ThinkPad R60 with screen SD that I won't. After installing the Samsung SSD Pro 840 the BSOD started coming, now every week, the last one on today. I don't see the option to download the dump anywhere file, so I enclose a picture with - maybe - some info.

  Can anyone help?

  Thank you

  okinchi

  

  Not at all surprising that involved C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. Pilot of the SYS Symantec event library.  I remove it and use MSE in its place

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Satellite Pro P300 - screen remains blank after power on

  My Toshiba Satellite Pro P300 power on, the screen remains blank.

  Can someone please help?

  Looks like a FL. inverter problem
  I doubt that you could replace is it s a job to a service technician.
  The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog