Satellite Pro P300-1BD - installation of inappropriate language

Similar Questions

• Satellite Pro P300-1bd - no parts sound dolby after recovery

  Hello

  I bougt garage a toshiba satellite pro P300-1bd. With this laptop, it has Dolby sound piece on the pc.

  I installed my P300-1bd with the recovery with XP disc. I've updated the pc with windows vista Enterprise edition.

  Before installing, I had an excellent sound quality, with a good bass.

  Now after you recorey, the sound is very bad.

  I installed the drivers for the card's audio fr.
  But, what should I do to get my good his return.
  I can't find sound on the internet room so that I can install it. But I don't know if that's the problem.

  Can anyone help me to get my perfect his return.

  Thank you in advance.

  Post edited by: melina

  Hello

  The European driver Toshiba page provides two audio Conexant drivers for this model of laptop.
  + Driver sound + 4.36.10.0
  + Driver sound + 4.83.1.0

  I recommend the new version 4.83.1.0
  Uninstall the old driver first in the Device Manager.

  Restart the device and install the new downloaded drivers.

  Hope this helps to get better sound quality :)

• Satellite Pro P300: Error after installation of battery 8.00.02 BT WIN 7 32-bit

  I upgraded my Satellite Pro P300 Vista Win7 Pro 32-bit.
  The programs and existing drivers had (compatibility) problem with Win 7 whitch is indicated when installing Win 7 Pro 32-bit.
  So I download and install this new battery.

  In the peripheral equipment there are a 3-port BT. But the software (settings, communications, etc.) does not start...

  for example: BtAssist.exe - failed to execute (Dutch: toepassingsfout), may not start successfully this applicaton (0xc00000be, click Ok to exit).

  Someone at - it ideas?
  Everything worked fine before installen Win 7.

  Thanks already

  Eric

  Hello

  You did a clean install of Windows 7, or you have upgraded the Vista to Win 7?

  I recommend a new installation of Windows 7. It's better, because an upgrade from Vista to Windows 7 could leave some junk on the HARD drive and some tools/drivers Vista is not compatible with Win 7 OS.

  So to do a clean install of Windows 7, then download and install the new BT stack from this page:
  http://APS2.toshiba-tro.de/Bluetooth/

  Good luck

• Satellite Pro P300 BIOS not only flash through recovery CD en

  Hi people

  I tried to update my BIOS on my laptop Satellite pro P300 series, and it seems to have gone wrong. I have now read a lot about the winphlash version goes wrong. I managed to create a recovery CD, and it starts the procedure of flash and works almost to the end, but then shuts down and restarts. I have no idea how to solve this problem. I don't know that I have the correct procedure and BIOS recovery. I can boot my laptop with Ubuntu, but I really don't want to get rid of my windows installation.

  Any help would be appreciated.

  Concerning

  Etienne

  Hello

  Have you tried to Flash the BIOS in the Windows operating system?

  The BIOS is focused on victory and you can Flash the ROM module using the version of the BIOS based win.

  This, to a Windows operating system installed.

  Found a doc HowTo very interesting on the update of the BIOS.

  http://APS2.toshiba-tro.de/KB0/HTD9502M10000R01.htm

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Satellite Pro P300 - hot to get the WLAN driver in my device manager?

  I have a Toshiba Satellite Pro P300 with xp pro. My wlan driver atheros AR9281 does not work. I uninstalled it as suggested by Toshiba
  and downloaded a new. How can I get the download open and in Device Manager?

  Prior to do any create new folder on the desktop.
  Download driver driver and start TC00147200C.exe Toshiba will start extraction of archive
  Click on Options
  Click Browse, and then choose new folder on the desktop
  Click next
  Click Start
  When finished open the new folder and go to the folder XPDrv
  Start the installation with setup.exe and the installation should start

  Can you please confirm if it works?

• Satellite Pro P300 - how to upgrade Intel GM965 display driver?

  Hello

  I do not found how can I update my graphics driver from the Web from Toshiba website. I found some other updates, but not this one...

  And I have a problem with a game (Starcraft II) with "igxprd32" which seems to refer to the Intel Graphics accelerator driver.

  When I go to the update site Intel it tells me:
  "A custom computer manufacturer driver is installed on your computer. The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer. "

  Thanks in advance for your help

  Concerning

  (Satellite Pro P300)

  Hey,.

  I had the same problem on my Satellite Pro U300 but it of easy to solve.

  Go to Device Manager, right click on your graphics card. Select Update driver and follow the instructions in a new window. Select the Advanced installation where you can choose the directory and the driver yourself.

  But don t forget to extract the zip first, otherwise the driver will not be found. ;)

• Satellite Pro P300 - how to get the original without media image?

  Hello

  I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

  The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

  Liam is just that Win 7 is better than Vista OS.
  So if you have the ability to install Win 7 I recommend doing this instead of Vista.

  However, the Toshiba recovery disc contain only the Vista OS.

• Satellite Pro P300-1FP: need drivers Windows XP

  HI -.

  just bought a Toshiba Satellite Pro P300-1FP.

  Came with Vista installed. I would like to use XP instead.

  The aircraft crashed the first time I tried to install XP.
  I looked online and found that I needed to change the BIOS settings to work around this (SATA, "AHCI" to "compatibility").

  This and that the installation worked fine, but there are a lot of missing drivers, for example for the sounds, graphics, ethernet, wi - fi, etc..
  This leaves me in a difficult position since I am currently unable to connect to the internet to look for the missing drivers missing drivers.

  Can someone point me in the right direction?

  Thank you very much

  Alan.

  OK buddy, I want to help you

  First of all he must know that your Satellite Pro P300-1FP belongs to the series of PSPC9E
  You can find the Win XP drivers for this series on the European driver Toshiba page.

  Everything has been published. Just download it

• The new use of recovery of Windows XP with my q Satellite Pro P300-19?

  I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »

  My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?

  Any help would be welcome.

  The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.

  Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
  So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
  Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
  You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).

  When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.

  If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
  So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
  Follow the instructions on the screen and the laptop will also reinstall.
  But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.

  So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
  Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
  This is the content of the Windows XP Recovery disk.

• Cannot install recovery image on satellite Pro P300-1EX

  Hello.

  I have never had many problems with a single laptop in my lifetime of work. I'm almost ready to throw this thing out the window. I have a satellite pro p300-1EX.

  I wanted to do an install new os just to make things a bit faster for the customer, it was 8 hours ago.

  First, I installed a Home Windows OEM pre 32B version. Then I saw that the CD would not work.

  So, Okay - I'll bring back factory default:

  (1) there is no link repair starting and pressing F8
  (2) there is no HARD drive untilty when you press 0 - that does nothing
  (3) there is no recovery console, by putting in an OEM version of windows vista
  (4) I try to download recovery disk creator bloody software and get this - it does not work. It creates a shortcut to a file that's not here yet. TRDCLcher.exe, can you, im speechless.

  So now, I have to spend £30 of my own money by obtaining a disc sent to me? I don't think so.

  So, what can I please? It was a horrible experience. Nothing works. The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it. Instealing the OEM deleted all tools by default, but I can't NOT THE DOWNLOAD.

  Please, please help me.

  Thank you.

  Hello

  Maybe it sounds stupid now, but this is simply.

  Here's my explanation of how it works:
  Almost 4 or 5 years Toshiba offers laptops without recovery DVD but with recovery image stored on the HARD drive. As much I know about former Satellite/Satellite Pro P300 recovery image was recorded on the second partition of HARD drive in the folder named HDDRecvery. This model laptop was shipped with Windows Vista.

  As you know original recovery image can be installed n in two ways:
  -You can use the recovery HARD drive installation method - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  -You can use the created recovery DVD disk

  HARD drive recovery facility can be made if the laptop has only factory settings. In this case in advanced startup options (F8), you will have the option to fix my computer. If the notebk has been installed with the version of the OS or any other operating system of this option won't be available more. Because of this Toshiba has preinstalled reminder with the message for owners of laptops create recovery DVDs.

  Your questions:
  > There is no link repair starting and pressing F8
  If this laptop doesn t have to factory settings it will not appear in the advanced startup options
  > There is no HARD drive untilty when you press 0 - that does nothing
  If you have European book this model with zero will not work. It only works with the United States and Austraian mobile.
  > There is no recovery console, by putting in an OEM version of windows vista
  I put t understand it. What happens when you start with the OEM version?
  > I am trying to download bloody recovery disc creator software
  If you have the European model of laptop, it can not be downloaded. This piece of software is included in the recovery image only.

  > So now I have to spend £30 of my own money by obtaining a disc sent to me
  I understand, but at least with the original recovery DVD you can install OS and all necessary things in an hour only.
  > The recovery partition, I see is still in tact, it's just like the laptop doesn't recognize it.
  Yes. Without factory settings you will not have access to these data.

  Follow these steps:
  -start your laptop and press F2 to enter the BIOS settings
  -set the BIOS to default settings and reboot the laptop
  -When the laptop reboots press F12 to get into the boot meny
  -When the boot menu appears on the screen put the original DVD of recovery in ODD
  -Choose the CD/DVD drive on the list and press ENTER
  This will force it's STRANGE to be the first boot device and you should see process on the loading screen. Click next or OK nothing change and wait for the recovery procedure starts.

  Please try it and let me know exactly what is happening.

• Re: My Satellite Pro P300-19 q there Firewire 400mbps, 800 or 1600?

  Which firewire connection my Satellite Pro P300-19 q did?
  I hope that this goes up to 800mbps (IEEE 1394 b) so I can use a powerful Firewire Soundcard for Audio recording of high quality.

  The only specs State he has IEEE 1394, but not the State is there, B, C or D

  IEEE 1394 - Firewire 400

  * Speed: 400Mbps
  * Cable length: 4.5 m

  IEEE 1394b - Firewire 800

  * Flow rate: 800Mbps
  * Maximum cable length: 100 m

  IEEE 1394b - Firewire 1600

  * Flow rate: 1600Mbps

  IEEE 1394b - Firewire 3200

  * Flow rate: 3200Mbps

  Hello

  I don't have any idea what firewire port is, but you should be able to know the installation details of material diagnostics such as SiSoft Sandra or Everest Home Edition.

  These tools, one for free and will help you diagnose the hardware.

  Welcome them

• Satellite Pro P300 - BIOS upgrade to 64 - bit

  Hello

  I have a Satellite Pro P300 - 266 PSPCDE and I am very happy with him.

  Since I have a WIN7 64 bit OS, ready to use and 8 GB of RAM I need to update the BIOS to 64-bit.

  I found a WinPhlash file on the support site of Toshiba (toshiba - tro.de) bios called - 20090226124829.zip. I tried to use it as described in the Toshiba support on the use of WinPhlash (http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm) page. Also, I made an exception for WinPhlash in the registry of the DEP.

  It still does not work.

  Since I am a user knowing very mediocre modern computers I guess I'm doing something wrong or I can be monitor something... can anyone please help me upgrade my system to its full capabilities?

  Thank you

  Aernout

  You don't need to upgrade BIOS. If everything works well don t change anything.
  I have Satellite P300 with preinstalled Win7 32 bit and works perfectly.

  How do your shopping with the 64-bit version?

• Satellite Pro P300 always try to boot first from CD/DVD

  Hello world

  I have a problem with my laptop Satellite pro p300 PSPCDE: my OS is on my HARD drive (hdd1 with a ssd and hhd 2 is empty).
  In the bios on the boot sequence, I have just put (my ssd) first HDD1, HDD2 (which is empty), then drive diskette, then LAN and cd/DVD, but when I start it, it always try first to read the cd/DVD (with the horrible sound of the cv/dvd when it tries to start on it) and finally it starts on the HARD drive.

  Why is he trying to boot from the cd/DVD? I don't understand, my bios version is 3.4.
  I am now on W10 x 64 pro, but the problem was the same with win 7 pro.

  Help me please!

  No one to help me?

• 2nd HDD on Satellite Pro P300

  Hi all can anyone tell please how to add a 2nd HDD satellite pro p300-180, given that a space inside

  Remove the cover for the second HARD drive and check if there is the HARD drive connector. If so you can put there second HARD drive. I did the same thing on my old P300.