Satellite Pro P300 (PSPC5E-00L00CEN) - where is the S/PDIF connector?

Similar Questions

• Satellite Pro P300 (PSPC5E) - driver Webcam open fail on Windows 7

  I installed the RC of Windows 7 64 bit on my Satellite Pro P300 PSPC5E and I have problems with the configuration of my webcam and microphone.

  I tried to install the Wizard software for the camera, 64-bit (windows vista) to configure the webcam but I get an error message with "Webcam driver open fail. Restart camera or computer.' nor a camera photo or computer restart the job. I get the image in Skype, but I can't change the settings or so (dark) and the microphone is much quieter, so it was on windows XP, it is set to its maximum.

  Is there a solution for this problem? I hope so :)

  Hello

  I think there is no solution for this problem at the moment, because you are using a Release Candidate of Windows 7 and at the moment there is no official driver for Windows 7.

  Have you tried the driver of Windows Vista so that s what you can do. Alternative visit you the Toshiba us page (http://www.csd.toshiba.com) and search for driver of Windows 7 beta. Maybe it works.

  Good luck! :)

• Satellite Pro P300 - 23L - horizontal lines on the taskbar

  I have a portable Satellite Pro P300 - 23L.
  Last night it suddenly appeared, about 30 horizontal thin white lines on the taskbar (actually on the bottom half inch of the screen).
  The top 3 or 4 of these lines seem to pulse in a fast and regular way.

  Now, I can barely see the icons in the taskbar, or the button to start in the lower left corner.

  I read on another forum that the problem may be due to a problem of "grounding".
  The charger plug is actually broken and repaired the wiring myself, but that some time previously, so it is possible that a connection is loose or is now was something shorting causing this effect.

  I had to order a new charger but in the meantime would appreciate any assistance in order to confirm or deny that this could be the problem.

  Any advice on how to remedy this?

  Hello

  If the problem would be with the power adapter this lines should NOT be visible using the laptop with the battery. Right?
  Therefore, it would be really interesting to know if the same lines are visible if the AC adapter is not plugged in.

  But I think that this is unrelated to the power adapter. In my opinion its a display issue or a graphics card problem.
  Therefore, you must connect an external monitor to check it out.
  If the same lines are visible on the external monitor, the graphics chip is assigned the case, it could be a display problem.

• Satellite Pro L70-A-140 - where is the bar symbol backslash on the keyboard?

  Hello

  I have Satellite Pro L70-A-140 and German Windows 7.
  Where is the backslash on the keyboard symbol?

  Lucchi

  Message was edited: assignment has been translated

  If your laptop has a German keyboard and language that you use is German, the backslash can be activated if you use ALT GR +?.
  Please check it out here.

• Re: Satellite Pro P300 - turning itself off on the password box

  Can someone help with this problem please?

  Sateliite Pro P300 my daughter will not feed, he died as the power on the password box appears on the screen. I can just make out the word continue until everything goes balnk and the laptop computer shuuts down. This happens to all power over.

  New machine use.

  She has her level geography course to finish for tomorrow!

  Really gratefule for any help that anyone can give.

  See you soon

  Martyn

  Hello

  What password box do you mean? You hear the Windows password?

  Well it s weird to say what causes the error, but try to start in safe mode.
  Load default settings in the BIOS during the F9.

  Make sure that the fan works because maybe he stops while he gets to hot.

  Welcome them

• Satellite Pro P300-19 q - cannot get the Wlan to work

  Hello

  Ive just bought the PRO P300-19 q and as many other people cannot get wifi to register even less to connect to any network. I will say that I am under XP Pro. I've updated all the drivers and everything is enabled.

  If anyone can help with this problem it would be greatly appreciated. It seems absurd that Toshiba or Intel have not resolved that, as the problem is ongoing since 2005 - announcement earlier I found.

  Thanks for your help, Zato.

  Hello!

  You have successfully updated the WLAN driver on the Toshiba site?
  http://EU.computers.Toshiba-Europe.com

  Try to update the BIOS of your laptop. You will find on the Toshiba site.

  You use the same standard WiFi on your laptop as on the router? Check in the properties.

  Good bye

• Satellite Pro P300-276: switch WLan on the front does not work

  Hello.

  I have a problem with my laptop and would like to receive help or ideas. The switch to forward wireless network adapter does not work.

  It works when I push it to the right and keep pushing it. Then light work, he finds the network, and the convenience store told me that everything is working well. When I let go, the light turns off, it can't find the network and the convenience store tells me that I have to put on the wireless network adapter.

  I suspect that it is a physical problem and I need to get the machine repaired. But if someone has a quick easy solution or a recommendation, then I would like.

  I'm online now using an ethernet cable (via a powerline adapter, which I tend to use anyway). Furthermore, the laptop is great and I love the big screen.

  Thanks in advance,

  Matthew

  Yes, in my opinion, his mechanical problem in something wrong with the switch may be a loser contact

  I think that the one and only one solution: laptop must be disassembled and the switch needs to be replaced

  But it is not easy and to be honest I advise to use a dongle USB external WiFi instead of paying lots of money to get this replaced change.

• Satellite Pro P300 restarts a few minutes after the stop

  Hello

  I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!

  The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).

  Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?

  Paul

  Where are you trying to download the BIOS?
  I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  To be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
  Check it!

• Touchpad on Satellite Pro P300 does not work with Windows 7

  Hello

  Recently, I load Windows 7 (64-bit) on my Satellite Pro P300. I downloaded all the drivers for W7 64 bit and installed everything, fortunately, most of the time.

  The touchpad, however, is not completely functional. The upgrade page says to use the Vista drivers and did not provide any drivers for win7. Installing the Vista drivers didn't really go so well.

  In any case, the essential element of the missing features is this thing where you drag your finger up and down the right edge of the touchpad, and it scrolls for you. I can click and double click and move the slider. But I can't scroll. And it's such a pain with move the slider above the scroll bar of the application, with a big screen.

  Any help would be appreciated.

  See you soon
  '

  If I understand you right you are missing these additional mouse settings. Am I right about that?
  Which driver you have installed?
  Perhaps Synaptics driver?

• Satellite Pro P300-19 q and WXP downgrade

  Hi all

  I need to buy a new laptop with windows XP on it. I was initially attracted by the Satellite Pro P300-19 q because of its ability to be downgraded to XP. However, I decided to do a quick serach first to see if someone had encountered problems and I saw a few posts where people are having problems with the wifi on them after decommissioning.

  The Satellite Pro P300-19 q isn't my first choice of PC Toshiba laptop and if the downgrade xp disc is not very effective, so I'd probably rather use my own copy of xp and downgrade a portable me (as long as the drivers are on the Web site). Anyone had any experience with these Toshiba recovery DVD to downgrade?

  Thank you

  Hello

  Satellite Pro P300-19 q belongs to the portable model PSPCDE and if you check download Toshiba and support under http://eu.computers.toshiba-europe.com page, you will see that this model of laptop is taken WXP supported.

  I don't know if you will get the recovery media of Windows XP Home edition with this laptop, but Toshiba offers all the necessary drivers, tools and utilities and you can install your own version of Windows XP Home edition.
  You can ask your local dealer if the Windows XP Home edition recovery media is delivered with this media.

• On Satellite Pro P300 touchpad has stopped working

  Hello.

  I have a Satellite Pro P300 equipped of Vista and the scrolling feature broke on my machane too.
  I also lost the touchpad icon in my taskbar and function to configure the touchpad.

  I've uninstalled and reinstalled the drivers, nothing works.

  If I had more hair, I would probably be pulling it. Help, please.

  Thank you

  Hello

  What drivers you have reinstalled exactly? Normally, you can download all the drivers from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you tested the scrolling feature using an external mouse?

• Satellite Pro P300 - no sound on Windows 7

  Hello world

  I had a serious problem with my Satellite Pro P300. I have all the drivers for download on the website of toshiba installed but I have no sound same with headphones. When I am playing music the spectacle of the sound icon he is read but any sound. I checked on a lot of Web site, forum and tested several drivers, but the problem is still there.

  Please help me before I go crazy with it.

  Hi faridas,

  I think that it s not easy to say and on Windows 7 I never had this problem, but maybe you need to turn the sound back on:
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  In addition, check in Device Manager if the sound card is properly installed. Also make sure the BIOS version is up-to-date.

  Last but not least check the Windows sound settings!

• Satellite Pro P300-25W - noise fan too heavy

  Hello

  I just got my Satellite Pro P300-25W and I hate the noise of the fan. Is there a way to make it less noisy race less often?
  I updated to Windows 7 and installed the drivers from the Toshiba DVD.

  In power options I selected everything to be optimized battery / record maximum power in the advanced power settings. But still, the fan runs almost all the time. I use Windows to surf a little, the CPU usage is very low (less than 10%), there is no 3D graphics movies or something goes on that would put fun on the GPU.

  It drives me crazy.
  I can do something, or should I just bought a laptop?

  I hope you can help!

  > Is it possible to make it less noisy race less often?

  There is an extra entry called Toshiba Power Saving and there you can change the performance of cooling module for battery or power mode.
  Usually, this should help

  But note; It depends on the internal temperature! Higher temperature means more rapid cooling modules
  It might be also possible that your cooling fans are full of dust and debris and prevents air circulation, remove dust and clean the fan using a jet of compressed air. Who helped in my case

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Satellite Pro P300 - hot to get the WLAN driver in my device manager?

  I have a Toshiba Satellite Pro P300 with xp pro. My wlan driver atheros AR9281 does not work. I uninstalled it as suggested by Toshiba
  and downloaded a new. How can I get the download open and in Device Manager?

  Prior to do any create new folder on the desktop.
  Download driver driver and start TC00147200C.exe Toshiba will start extraction of archive
  Click on Options
  Click Browse, and then choose new folder on the desktop
  Click next
  Click Start
  When finished open the new folder and go to the folder XPDrv
  Start the installation with setup.exe and the installation should start

  Can you please confirm if it works?