Satellite Pro U200-10I: DVD UJ-850 s player not working - corrupt/lack of pilot

Similar Questions

• Carpet * s UJ-850 DVD player not working - corrupt/lack of pilot

  Can help you. My driver is corrupted/missing and I don't know how to reinstall. Talked to someone today and he said that I had to delete something off the registry? Apparently it has something to do with me trying to install itunes on Vista?

  Any help welcome thanks.

  Rich

  Hi Rich

  Maybe this article will help ;)
  http://support.Microsoft.com/kb/314060

  Good luck!

• Satellite Pro U200-10I - need of detailed specifications

  Hello guys,.

  I have the laptop mentioned above and I want to know the specification of this laptop. I tried the Toshiba Web site but I failed.

  Hello

  Maybe I can help you my friend
  To my knowledge, the satellite Pro U200-10I belongs to the series of PLUA1E and it supports these devices:
  -INTEL CORE 2 DUO T5600(1.83GHZ) PROCESSOR
  -WIDE XGA 12.1 CSV "
  -120GB (5400 RPM) SATA
  -DVD-SUPER-MULTI (+ R DL) 8 X SLIM
  -Mobile Intel graphic Chipset 945GM
  -FINGERPRINTSENSOR
  -1 GB OF RAM (512 + 512 MB DDR2 667 MHZ)
  -BLUETOOTH
  -Wireless network card

  I hope it can be useful a bit

  Welcome them
  Jimi

• Satellite Pro U200-10I - how to disable the system at startup control upward?

  : x Hi,.

  I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

  Nedd your help! : D

  Hello

  Just checking the system do you mean exactly?
  Is this based on Windows or BIOS based?

  If you mean the ScanDisk in Windows startup you can disable it in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
  Change the BootExecute entry to: autocheck autochk *.

  After that restart the ScanDisk is disabled and doesn't appear at Windows startup.

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning

• Satellite PRO P100 - 383 DVD UJ - 850 s Firmware update

  Hello

  My laptop is a Satellite PRO P100-383 with a DVD burner MAT * a UJ-850 s.

  The current firmware of my DVD writer UJ-850 s MAST * one is 1.10 and I can't write some DVD-R, because they are not recognized as DVD-R, but as a CD - R. I think it's just the firmware of DVD writer that is too old.
  Is it possible to update this with new firmware please? because I found something in the download section for my laptop. Just drivers and BIOS of motherboard, but nothing on the MAT * an update of firmware UJ-850 s.

  Thank you very much for your answer.

  Friendly.

  Philip.

  Hi Philippe

  In my opinion you shouldn't change something but use high quality blank DVD - R TDK or Verbatim.
  Maybe you use some blank media cheap and without name.

  Have you tested with known brands?

• Satellite Pro U400-18 needs - Win8 drivers - microphone does not work

  I HAVE a PORTABLE Satellite Pro U400-18 a PSU45E computer AND I INSTALLED WINDOWS 8 64 bit BUT I can't FIND the DRIVERS WINDOWS 8 FOR MY MICROPHONE. (AUDIO DRIVERS)

  PLEASE CAN SOMEONE HELP? Thank you

  There is no special driver for microphone.
  Audio driver controls the microphone and the noise.

  By the way: what mic do you mean? The intern who belongs to the webcam?
  Only the microphone is working correctly by using an external headset?

• Satellite Pro C650 - arrow, slash and z keys do not work

  Can anyone help - my slash keys, arrow keys, z and question marks have stopped working.
  I saw several other posts on different forums for exactly the same combination of keys.

  I have a Satellite Pro C650.

  Looks like a malfunction of the keyboard.
  You can use the external USB keyboard properly?
  If you haven't noticed the same problems with the external keyboard, then I would recommend replacement of the internal keyboard.

• Re: Satellite Pro U400 - 13G: software uninstalled - FN keys do not work

  The other day I uninstalled many programs standard of his Toshiba Satellite U400 - 13G, because it has been very slow in implementing.
  But now I realized that his FN hotskeys does not work.

  I tried to look in the support forum and the list of drivers, but I can't find the answer.

  So the question is what program/driver should I install to get the keyboard shortcuts to work again. It is running vista 32 bit.

  Best looks Anders vangsgaard

  Hello

  Well buddy. For the future I'll give you a tip ;)
  Never remove any parts/software if you n t know what they are for ;)

  The Satellite Pro U400 - 13G seems belongs to the PSU45E series.
  Choose this model number to download driver form Toshiba Europe.
  Then download the package of value added.

  To reinstall this PPV you will need to remove the preinstalled old VAP.
  Do it and after rebooting again to install the new downloaded package added value.

  In my view, that the FN buttons should then work.

• Satellite Pro C660 - Synaptic Touchpad pinch zoom partially does not work

  Hey there,

  The laptop I have is a satellite pro C660 2I. I've had my laptop for a year (ish) now, and he always had this 'problem '.

  The touchpad has the ability to "pinch" which allows the user to zoom in or out using 2 digits on the touchpad (i.e. move the fingers together to zoom out).

  Unfortunately, the touchpad recognises 2 figures as being present when I use only one finger, but only when I use the right side (or two-thirds of the pad from the right).

  This made me think that maybe he was dirty, greasy etc so I cleaned and nothing has changed. I tried to uninstall the driver, reinstall / update... nothing. The strange thing is that it seems to work for approx. 1 second after I apply pressure to the left hand side in a movement of friction and then use the right side. This leads me to believe that the left side is * being constantly recognized as in use even when it is not *, but I don't know why.

  I do that anyone can recommend?
  Open the laptop and clean it?
  A component failed to be replaced? A software update?

  I'm at my wits end with this laptop, and this is the only problem... is so constant now that the pad is almost unusable (deepened over time, but it wasn't a big deal at first).

  Thanks in advance,
  Griff

  NOTE: If there are all the technical information required, please treat me like a cave man / technological invalid. I am somewhat qualified but I would rather patronisingly simple instructions as sending unnecessary information to those who are trying to help me lose some time.

  Perhaps your question describes isn't related to a dysfunction of the touchpad, but on the fact that the touchpad supports the dual mode functionality.

  + How do I enable or disable the Touchpad double mode +.
  http://APS2.toshiba-tro.de/KB0/HTD9702NL0000R01.htm

  Check if there is a difference with the touchpad on or off dual

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Satellite Pro A120: After upgrade Vista control volume does not work

  Hello, can help them.

  I have a satellite Pro A120, and because I used the upgrade disk to upgrade to Vista, I was not able to control the volume button on roller on the front of my laptop.

  I see that someone has posted a repsonce for someone who uses an A100 series, but value added package for the A120 doesn't include this utility.

  Thank you

  David

  Discovered since I posted this question, by downloading the latest sound card driver, I can now control my sound on the roll switch on the front of the machine, but there is no display appears on the screen, as he did with XP.

• Satellite pro U200 - change DVD-RAM with a BD - ROM

  Hello, my DVD-RAM has been damaged, and now he does not write data, I wanted to ask if I can change the current DVD - RAM UJ-842 model with one of them:

  1 - Panasonic UJ - 120 Blu - ray BD-ROM/8 x dvda±rw DL notebook IDE Drive (black)
  http://www.geeks.com/details.asp?invtid=BLK-Uj-120-do&cat=DVD

  2 Sony Optiarc BC-5500 has Blu - ray BD-ROM/8 x dvda±rw DL notebook IDE Drive (black)
  http://www.geeks.com/details.asp?invtid=BLK-BC-5500A-do&cat=DVD

  Thanks in advance.

  Hello

  I m not very good if this disk will work in your notebook.
  The fact is that hard drives support different master/slave/c-salt settings and wrong settings lead to error IDE #1.
  The BIOS does not simply recognize the CD/DVD drive.

  Here, in this thread someone has replaced the STRANGE with Blueray and it worked:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=139719

  Check it out

• Satellite Pro A200 - CD/DVD question - D:\ drive is not accessible

  Hello

  No one knows what may be the cause of this problem - when I put a disc into my laptop to install the new sotware - I see the following error message:

  "D:\ is not accessible."

  The request could not be performed because of an i/o error. "

  Thank you

  Kristian

  I can provide a possible solution that has worked for many others:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart your machine and windows will install the drive again. Check if it worked for you.

• Satellite Pro L20 - right button on the touchpad does not work

  I have a Sat Pro L20.
  When I press the right button on the touchpad, nothing happens. The left button works fine.
  I checked the properties of the mouse left button is set as the main click with the right button, defined as the secondary click.

  Thank you.

  Hello

  Maybe the touchpad button has a physical malfunction.
  But first of all, you can try to reinstall the driver for the touchpad. Check if the resettlement will change something. But the truth; I don t think this will solve the problem. Anyway, try is free, you know.

  But if that does not help so I think you need to replace the touchpad.