Satellite pro U200 - change DVD-RAM with a BD - ROM

Similar Questions

• Satellite Pro U200-10I: DVD UJ-850 s player not working - corrupt/lack of pilot

  Hello

  I just bought my new laptop Satellite Pro U200-10I. The DVD doesn't seem to work at all. It is said, Mat * a s DVD UJ-850 drive not working - corrupt/lack of driver. Help, please.

  Appreciate your response. Thank you!

  BAHI

  Hello

  The CD/DVD drive using the Microsoft diver who is included in the Windows operating system.
  According to this page or some registry keys are corrupt windows clean driver failures.

  I think that you must first access the Device Manager and check if the CD/DVD drive is displayed correctly.
  If you do not see a yellow exclamation I recommend to remove the drive from Device Manager and reboot the laptop.

  After restarting again the OS should recognize the new device (CD/DVD drive) and should implement the drivers again.
  Finally start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the device.

  Good luck

• Satellite Pro A100 (PSAAC) DVD-RAM UJ - 841S cannot read audio CDs

  Sat Pro (psaac) DVD-RAM UJ - 841S will not read or play the audio CD
  Everything else works fine but put in any audio cd and nowt.
  Help?

  Hello

  As you know, each CD is compatible and supported by each optical drive.
  Can I ask you this and audio CD don t work? These are original audio CD or burn one?
  You should know that many new audio s CDs come with copy protections of different and sometimes it happens that these CD s are not readable.

  But we must first know if need all options are enable. To do this you must enter the properties of the drive and check if the option enable digital CD audio for this CD-ROM device has been activated successfully.

• Satellite Pro U200 - does support the DVD double layer?

  Hello

  Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

  Kind regards
  CCBC

  Hello

  It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

  To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

• Satellite Pro U200: Display Resolution changed to 1024 x 768, after sleep (Vista)

  I have some problems with my Satellite Pro U200 (WinVista, BIOS 3.50, Display Driver 7.14.10.1217).

  After the exit mode standby, the display shows the correct resoluion of 1280 x 800 for a second and then goes to 1024 x 768. It's very annoying.

  I tried to uninstall / reinstall the display driver, but it did not help.

  Does anyone have an idea?

  Well, I remember a similar problem happened on U200 with Windows XP and Windows XP MCE.
  The update of the graphics to the version 6.14.10.4543 driver has solved this strange switching

  Maybe the next update of the graphics card driver will clear this issue

• Satellite Pro U200 - DC jack is broken

  Hello everyone

  I was wondering if you guys can help me because I broke the dc jack on my laptop, its load only when the pin of the charger is in it at a certain angle and I can actually feel the plug into my laptop so moving is not the charger. I tried searching on the internet but without success because I don't know the part number, and even if I put the serial number on the website of his not really give me the part number and may cause toshiba do more :(
  Now I'm looking for power supply for Satellite Pro U200-199
  Part number: PLUA1E-01900JEN
  Main features
  -Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7200
  -Windows XP® Professional
  -100 GB hard drive
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -12.1 "screen Toshiba TruBrite® WXGA TFT
  -Drive DVD Super Multi (Double Layer) slim

  Any help would be greatly appreciated. only thing, I had an experience at the hardware level, but not very good with soldering, should weld or not it comes with the wire that can be clicked into place.

  Thank you

  In the past, I found several threads where people have reported the same issue but on the different model of laptop. Obviously some of them have done a good job and repaired only.
  To find the DC jack is not a problem.

  You can find it on eBay and it is cheap. Put in google DC jack U200 and you will find it.

  Problem is that any computer laptop must be disassembled and new connector soldered to the right place.
  Can you do this?
  I want to say if you n t have experience with this stuff don t touch anything and ask for professional help.

• How to disassemble the Satellite Pro U200

  Hello

  Lately, I have come to the need of the back opening of Toshiba Satellite Pro U200, you know the place where RAM and all the other stuff is stored.

  I have my tired to do it, but I could not open, so I was afraid to break something.

  Any of you know if it is possible to open the back of the laptop?

  If possible, it would be possible to close it later? :]]

  What you want to change on the laptop? The RAM?

  As far as I know the locations of memory are placed under the keyboard. Therefore, you must remove the keyboard stand and keyboard.
  It's a little tricky and if you n t have experience with this that you should ask a technician for laptop help.

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.

• Satellite Pro U200 - projector as external monitor

  I try to connect a projector as external monitor. I use a HDMI adapter, VGA, because the entry in the projector.

  If I use an old laptop, it works OK.
  If I use my Satellite Pro U200, Modelo PLUA1E-02301RSP, the display shows only the initial screen,

  I mean the landscape with the TOSHIBA logo, but it doesn't change.
  If, for example, I look at some photos as I have both monitors running, the portable computer I see the photo, but the projector doesn't change, it shows only the landscape and logo.

  What can I do?

  Thank you and best regards,

  Vicente

  I put t know if I understand you right but perhaps extended desktop enabled. You must disable this option in screen resolution settings.

  Can move you the open Office Windows laptops to the pic you is on the projector?

• Upgrade SSD on Satellite Pro U200

  Hello!

  I have a laptop (Satellite Pro U200-PLUA1E-00X007HU of the v3.70 win7 32-bit bios), I want to upgrade with a series of Samsung 830 64 GB SSD. I read that the SSD need AHCI mode. My laptop supports AHCI mode? What can I change in the bios before installing the new storage?

  Thanks for the help!

  Robert

  Hello

  I see you're confused
  First, he must know that the laptop supports the SATA controller.
  This means that you must use hard drives SATA or SATA SSD.

  Second: AHCI means SATA some BIOS supports only a SATA mode, and you can switch between compatible (IDE) mode and AHCI (SATA) mode.

  If this switch is not available in the BIOS mode is always set to AHCI.

  However, to SSD drive question:
  I put t really no problem using an SSD.
  It must function as the SATA controller support

• Satellite Pro U200-10I - need of detailed specifications

  Hello guys,.

  I have the laptop mentioned above and I want to know the specification of this laptop. I tried the Toshiba Web site but I failed.

  Hello

  Maybe I can help you my friend
  To my knowledge, the satellite Pro U200-10I belongs to the series of PLUA1E and it supports these devices:
  -INTEL CORE 2 DUO T5600(1.83GHZ) PROCESSOR
  -WIDE XGA 12.1 CSV "
  -120GB (5400 RPM) SATA
  -DVD-SUPER-MULTI (+ R DL) 8 X SLIM
  -Mobile Intel graphic Chipset 945GM
  -FINGERPRINTSENSOR
  -1 GB OF RAM (512 + 512 MB DDR2 667 MHZ)
  -BLUETOOTH
  -Wireless network card

  I hope it can be useful a bit

  Welcome them
  Jimi

• Satellite Pro U200 crashes, freezes in a strange way

  Hello

  I have laptop Satellite Pro U200, once by accident, it fell out of my backpack.
  Then after, I pressed on IT Windows key is not started, even though I could hear the hard drive makes a noise.
  I got my computer to Toshiba repair service.

  It was very funny so I explained the problem to repair the assistant and after he pressed windows button started working as nothing really happened.
  After some time I noticed that sometimes Windows everything freezes, as stop and that's all I can not move my mouse, keyboard does not (Ctrl + Alt + Delete included) all that I can do is hold OFF the button for everything and restart Windows...

  Now he has started to crash (gel) in particular much more often.

  I thought that if these two things are linked?
  Maybe someone of you have faced such a problem before and know how to solve?

  I think buying new hard drive, but I don't know if that would solve the problem, what do you think?
  If all I have to do is buy a new hard drive maybe someone of you knows some net store where I can find it?

  Thanks a lot for you help,

  Hello

  As I understand it, your laptop start freezing and crashing after several minutes of use.
  Is this good?

  Well, if yes then I have more questions;
  Have you noticed a high temperature?
  If Yes, then this problem could be related to a high temperature and windows would freeze due to overheating.
  In this case I recommend that you clean the fans using a jet of compressed air.

  It would also be possible that your RAM module is also affected

  My laptop froze because of the modules was defective.
  I tested the laptop with other modules and could solve the problem

  Maybe my tips and tricks could be useful for you to solve the problem with the laptop.

• CPU in Satellite Pro U200 temperatures are too high

  Hello

  I'm a little confused / concerned about the temperature of my CPU (Intel T7200) in my Satellite Pro U200-199. The confusing thing is that the case temperature is generally higher than that of the junctions of the two nuclei, which is the opposite of how it should be.

  Everyone knows this?

  As well, the case temperature is higher at seems reasonable, even in basic use. Basic use of office applications takes the temperature to 49 c, and then everything above that (opening an application for example) increases the temperature has high degrees of the years 50 or 60. Under a larger load, temperature (T-box) goes up to 65 C.

  One of the consequences is that the fan is on most of the time.

  I would like to know if there is a problem with the measurement of the temperature T-box is measured correctly, or if the processor overheats. If the measure is a fault, then do nothing about this? Like changing the BIOS?

  I should mention that the computer is only a week and has a BIOS update.

  Any ideas or help greatly appreciated.

  David

  Hello

  The temperature of 50-60 degrees is not unusual. But I wonder how you measure this temperature or what tools or utilities did you use?

  Usually the CPU is not only responsible for the temperature inside the laptop.
  The graphics card and HARD drive also produce heat which increases the temperature of the laptop.

  Anyway, the computer supports protection against overheating. This protects the laptop and parts from overheating.
  If the temperature reaches a critical threshold the laptop would be automatically stops down
  but it seems that the laptop works properly so in my opinion that you should not be worried. ;)

• Satellite Pro A100: XP says RAM 192Mo, utility Tosh says 256 MB

  My recent purchase of an A100 was supposed to be with 256 MB of RAM - but XP does not see. He sees only 192 MB. The utility Toshiba said that there is 256MB. How to get them to agree?

  Hello

  Some of the Satellite Pro A100 units were shipped with ATI RADEON Xpress 200 M graphics card shared memory.
  This graphics card uses part of the main memory.
  As Michael suggested the Toshiba utility shows the memory full value and XP only shows the difference.
  As far as I know, you can change the value in the properties of the graphics card.

• Satellite Pro U200 - recover all of the WinRE partition system

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS4 with Vista Business.
  HOWTO recover the entire system of the WinRE partition?

  It is really strange that you do not understand how it works with recovery and what is this partition WinRE (Windows Recovery Environment).

  One more time:
  Partition WinRE has nothing to do with installation of recovery and laptop factory settings.
  If you want to have BONES like the first day, you must install OS again. You can do this if you install recovery image designed Toshiba. I don't know if this image you got saved on DVD (disc facilities) or saved as image of HARD drive recovery.
  If you can tell me exactly what you have, I can explain how it works.

  WinRE partition is characteristic of Vista and Toshiba has nothing to do with it. So, if you want to know more about it using Google and Wikipedia. Maybe some Microsoft forum can help you about this.

  http://en.Wikipedia.org/wiki/Windows_Recovery_Environment