Re: Satellite Pro U400 - 13G: software uninstalled - FN keys do not work

Similar Questions

• Satellite Pro U400-18 needs - Win8 drivers - microphone does not work

  I HAVE a PORTABLE Satellite Pro U400-18 a PSU45E computer AND I INSTALLED WINDOWS 8 64 bit BUT I can't FIND the DRIVERS WINDOWS 8 FOR MY MICROPHONE. (AUDIO DRIVERS)

  PLEASE CAN SOMEONE HELP? Thank you

  There is no special driver for microphone.
  Audio driver controls the microphone and the noise.

  By the way: what mic do you mean? The intern who belongs to the webcam?
  Only the microphone is working correctly by using an external headset?

• Satellite Pro C650 - arrow, slash and z keys do not work

  Can anyone help - my slash keys, arrow keys, z and question marks have stopped working.
  I saw several other posts on different forums for exactly the same combination of keys.

  I have a Satellite Pro C650.

  Looks like a malfunction of the keyboard.
  You can use the external USB keyboard properly?
  If you haven't noticed the same problems with the external keyboard, then I would recommend replacement of the internal keyboard.

• Satellite Pro A-153 C50: F11 function key does not work

  The F11 key where I can spend the sound power switch does not work!
  The other keys work correctly.

  Everyone knows how to restore its function?

  Hello

  You use the special function or Standard F1 - F12?
  The special mode of operation allows you to use special features without pressing the FN key.
  This means that if the special function mode, you must press only F11 to turn the sound on and off. In the case of special function mode is off, you must press FN + F11 to turn the sound on and off.

  You can enable or disable the special function mode in:
  Office-> Office help (in the task bar)-> tools & utilities-> function key

  But I wonder if the F11 key works with other software?
  For example: pressing F11 key while using the Internet browser (internet explore) should allow mode full-screen. You can check this?

  Keyboard F11 key is maybe defective and so the sound ON / Off function does not work

• External monitor flickers always on Satellite Pro U400 - 13G

  Hello

  I have a Satellite Pro U400 - 13G that connects external monitors with VGA port.

  I am running Vista Ultimate 64-bit with the latest graphics drivers from intel, I also tried the drivers from the Toshiba download site.

  Anyway... I tried 3 different external screens to connect a LG with resolution 1280 x 1024, an acer projector with resolution 1024 x 768 and a Samsung SyncMaster 226BW running 1680 x 1050.

  All these monitors simply sparkles... a higher resolution = more flicker. It seems to be worse with gray background.

  I tried the system Windows 7 RC1, same problem.

  When I unplug my diet, Twinkle seems to be... a little reduced, there is still a lot of flicker.

  Someone knows how to fix this?

  Hello

  I think she might be grounded question in this case it is recommended to use a power adapter 2 cords.

  I also found this thread on U400:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=150470

  The user uses the cable HDMI to DVI and the external image is even more clear that the laptop LCD

• Can I get the battery 9-cell for Satellite Pro U400 - 13G?

  Hey

  Can someone tell me if it is possible to get a battery 9 cells for Satellite Pro U400 - 13G.
  And if it is then what is the part number?

  Best regards Anders

  You know the Web from Toshiba website Options & accessories?

  See this page:
  http://EU.computers.Toshiba-Europe.com-> peripheral services & -> PS Options & accessories

  There you will find all the compatible options.

  AFAIK this battery could be compatible with the Satellite Pro U400 series:
  * Battery Pack (Li-ion, 9 cell, 6000mAh) PA3537U-1BRS *.

  Good bye

• Satellite A205-S5843: map unknown WLAN & some keys do not work

  OK one problem im probably get laughed at the other does not

  First problem.
  I don't know what a network card.
  My first thought is wireless internet, because it says it has a wireless in there, but I can only connect to a network and nothing else even in my apartment has wireless I can only connect to the network... plz help the noob!

  Following problem.
  Some of my keys will not work... nothing has been spilled on it because I refuse to let any liquid near him by fear of death...
  Keys that don't work are the Z, R, Y, the arrow keys, press FN and the /? button.
  It used to work and now it is not a site suggested that I press FN and press the f11 key.

  I did and it would work for about 5 minutes and then nothing... now the FN function not and im so confused and angry... it is my laptop for college and it really hurts when I have to use the mouse to click on the screen keyboard all the time... help plz

  Hello

  The A205-S5843 belongs to the American TV series.
  I checked the hardware specs for the Toshiba page and it seems that this laptop was equipped with the Atheros 802.11 wireless LAN card b/g.

  The Atheros Wlan driver can be downloaded from the Toshiba driver page we or this portal of Toshiba Europe WLan:
  http://APS2.toshiba-tro.de/WLAN/

  Regarding your problem of keyboard/button.
  You guarantee that this is not a software problem?
  I want to say have you tested if the keys/keyboard of laptop s works with the original image of Toshiba OS preinstalled?

  In my opinion this behavior strange keyboard looks more hardware issue more software problem, but it s worth it to check if the new facility would solve your problem
  But if you see any improvements then the keyboard should be checked by an authorized partner.

• Satellite Pro U400-12U - Vista upgrade to Windows 7 will work with Win XP

  I got my Vista upgrade to windows 7 a few weeks ago.

  As I had downgraded from Vista to XP - Pro, I wonder if this Vista upgrade to Windows 7 on my U400 - 12U now works under XP, or that I first must be reinstalled Vista?

  Hello

  You have the Toshiba preinstalled Windows Vista if you want to upgrade to Win 7.
  The Vista Win 7 upgrade does not work with pre-installed Win XP.

  Welcome them

• Satellite Pro C660 - Synaptic Touchpad pinch zoom partially does not work

  Hey there,

  The laptop I have is a satellite pro C660 2I. I've had my laptop for a year (ish) now, and he always had this 'problem '.

  The touchpad has the ability to "pinch" which allows the user to zoom in or out using 2 digits on the touchpad (i.e. move the fingers together to zoom out).

  Unfortunately, the touchpad recognises 2 figures as being present when I use only one finger, but only when I use the right side (or two-thirds of the pad from the right).

  This made me think that maybe he was dirty, greasy etc so I cleaned and nothing has changed. I tried to uninstall the driver, reinstall / update... nothing. The strange thing is that it seems to work for approx. 1 second after I apply pressure to the left hand side in a movement of friction and then use the right side. This leads me to believe that the left side is * being constantly recognized as in use even when it is not *, but I don't know why.

  I do that anyone can recommend?
  Open the laptop and clean it?
  A component failed to be replaced? A software update?

  I'm at my wits end with this laptop, and this is the only problem... is so constant now that the pad is almost unusable (deepened over time, but it wasn't a big deal at first).

  Thanks in advance,
  Griff

  NOTE: If there are all the technical information required, please treat me like a cave man / technological invalid. I am somewhat qualified but I would rather patronisingly simple instructions as sending unnecessary information to those who are trying to help me lose some time.

  Perhaps your question describes isn't related to a dysfunction of the touchpad, but on the fact that the touchpad supports the dual mode functionality.

  + How do I enable or disable the Touchpad double mode +.
  http://APS2.toshiba-tro.de/KB0/HTD9702NL0000R01.htm

  Check if there is a difference with the touchpad on or off dual

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Satellite Pro U200-10I: DVD UJ-850 s player not working - corrupt/lack of pilot

  Hello

  I just bought my new laptop Satellite Pro U200-10I. The DVD doesn't seem to work at all. It is said, Mat * a s DVD UJ-850 drive not working - corrupt/lack of driver. Help, please.

  Appreciate your response. Thank you!

  BAHI

  Hello

  The CD/DVD drive using the Microsoft diver who is included in the Windows operating system.
  According to this page or some registry keys are corrupt windows clean driver failures.

  I think that you must first access the Device Manager and check if the CD/DVD drive is displayed correctly.
  If you do not see a yellow exclamation I recommend to remove the drive from Device Manager and reboot the laptop.

  After restarting again the OS should recognize the new device (CD/DVD drive) and should implement the drivers again.
  Finally start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the device.

  Good luck

• Satellite Pro A120: After upgrade Vista control volume does not work

  Hello, can help them.

  I have a satellite Pro A120, and because I used the upgrade disk to upgrade to Vista, I was not able to control the volume button on roller on the front of my laptop.

  I see that someone has posted a repsonce for someone who uses an A100 series, but value added package for the A120 doesn't include this utility.

  Thank you

  David

  Discovered since I posted this question, by downloading the latest sound card driver, I can now control my sound on the roll switch on the front of the machine, but there is no display appears on the screen, as he did with XP.

• Satellite Pro U400 - 13G: Modem driver installation failed

  Hello

  I tried to install the drivers for my modem provided by toshiba, but after the execution of the installation utility installation said installation faild.

  I also tried to use drivers provided by driveragent.com, as well as Windows Update, the same result.

  None of the drivers I have tried works, IV ' e even tried to look up the ID of material on google, same result.

  Anyone got any suggestions?

  Hello!

  Try to install the drivers manually in the Device Manager > update driver. Maybe it works.
  Download and install the latest driver for your laptop from the Web from Toshiba website.

  The hardware ID, you can see on this site:
  http://www.PCIDatabase.com/

  If doesn't work, you should try to update the BIOS. Search on the Toshiba site for an update.

  Good bye

• Satellite Pro U400-142 - can't get Draft N to work

  Hi guys

  I just bought this pathetic machine; I wish that I n t now...
  Really, I went instead of speed wireless 300Mbps...
  In any case I have a belkin N1 wireless router and this laptop I tried everything to get the project speed N, but it still remains on 54 Mbps...

  According to the small computer in the taskbar... I've configured the belkin router... and have changed virtually every setting in the "network connections" for the wifi N card installed on this laptop.

  I can't let him go all 54 Mbps more quickly then... There was a moment, when I saw the speed to jump up to 270Mbps for about 3 seconds, then returned to 54 Mbps...

  Someone at - it similar problems and how they sorted it?...

  Cheers.

  Hello!

  Have you tried to update the driver for your laptop WiFi? Just check for an update from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As I already wrote in another thread, you should look for an update of the firmware on your router. This could also solve the problem.

  I have a Satellite U400 (it s similar to yours) and I can use the speed N project without problems. :)

  Good bye

• Satellite Pro L20 - right button on the touchpad does not work

  I have a Sat Pro L20.
  When I press the right button on the touchpad, nothing happens. The left button works fine.
  I checked the properties of the mouse left button is set as the main click with the right button, defined as the secondary click.

  Thank you.

  Hello

  Maybe the touchpad button has a physical malfunction.
  But first of all, you can try to reinstall the driver for the touchpad. Check if the resettlement will change something. But the truth; I don t think this will solve the problem. Anyway, try is free, you know.

  But if that does not help so I think you need to replace the touchpad.