Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

Hi all
I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

Any suggestion? Thank you!

Michael

Hello

I think that in this case, you can use a network switch.

Tags: Toshiba

Similar Questions

  • Satellite Pro A200 - how to activate the new device LAN card?

    Hello.

    I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

    The laptop is running Windows 7 64 bit

    Kind regards.

    Hi evo8.

    What card WLAN have you had before and do the work of a former?
    I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

    By the way: do other FN keys FN + F8 work or simply not?

  • I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

    All;

    I missed upwards at the start of my new laptop... I fail to use Vista.
    So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

    How can I get the original installation of this machine...?

    Any help is welcome...

    Kind regards...

    Hello

    Try with https://backupmedia.toshiba.eu/landing.aspx

    Good bye

  • Satellite Pro U400 - how to upgrade the BIOS from 17/07/08

    I downloaded the update to the bios - the following file: bios - 20080717104036.zip
    I unzipped. But the way I did it twice and then I can not find the file to install this update.

    The first file of the sip consists of another zip file and in the second, there are 3 foulders: BOOT, EFI and SOURCES and 1 file BOOTMGR that is not a program.

    Can someone tell me what should I do with this update in order to install?

    Hello, Olga

    Updated the BIOS, you can use 3, 00 - WIN version. Extract all the files listed on the desktop, run WinPhlash.exe. Update BIOS version WIN can be done under operating system running.

  • Satellite Pro 4200 how to avoid the mistakes of the ACPI

    Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
    The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
    Piotr Plecke

    Hello
    in this case it would be interesting what Type of laptop it is exactly.

    You will find this model on the bottom of your laptop. There is a review of it.

    Some models have a Bios update available, others not, for example.

    Please send additional information!

    Good bye

  • Slow internet speed because of the Marvell Yukon LAN driver

    Hi all!

    I'm a newbie here so don't know if I'm supposed to ask this question here but anyway, hope, my problem is solved somehow.

    I'm on a Toshiba Satellite A200 laptop computer, I received last week and everything works well except my internet speed, its too slow. I'm on a 10 Mbps plan but my speed is no where near that. I get speeds close to 200 kb/s at 300 KB/s max. After some googleing I got to know that the Marvell Yukon LAN driver is the problem here.

    According to some Internet sites, we are supposed to roll back the driver to a previous version, I did it, but speed still does not pass. I have tried almost all the things I can do, but nowhere so far. I called my ISP, they say that everything is rosy on the other hand, ran the scan of Norton Antivruis on this computer, the firewall disabled, and the list is long but nothing.

    It would be great if someone could help me out here.

    Thanks in advance...

    Hello

    checked your connection with another computer, if the problem persists try with another machine?

    Would be really interesting... If not I suggest you to reclaim your machine to 'default '. Maybe it's solved something.
    Another idea would be to remove the service from the "Qos" (quality of service) of your network connection, which hardly slows down the connection for software reasons.

    Please give some feedback and please tell me what system you´re using (Vista, XP)

    THX

    Good bye

  • Satellite Pro U400 - How can I get the native screen resolution for external monitor?

    I have a samsung syncmaster external screen connected to a Satellite Pro U400.

    The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
    How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

    Hello!

    Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
    And what operating system are you using? Have you installed all Windows updates?

    For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
    And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

    Good bye

  • Satellite Pro 6100 - how to change the date and time in the BIOS

    Hello

    I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

    When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

    I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

    How can I change or update the time in the bios?

    Thank you

    Hello

    I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
    You can activate Windows by phone?

    Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
    Usually in the configuration of the BIOS you will find a brief info how changing the values.

    Check this box!

  • Satellite Pro U400: How to remove folder HDD Recovery Vista running Win 8

    Hello!

    I have updated my Windows Vista to Windows 8 via the Microsoft upgrade offer. Toshiba does not support the upgrade of the Satellite PRO U400 of Win8, but it works so far, only a few features are missing...

    In this HARD drive recovery process, Vista folder remained on my partition E: (containing about 5 GB of files dated 2008...).

    I HAVE (even 2 sets of) recovery DVD for Vista.
    The infrastructure of original HDDRecory for Vista on the laptop ran defective, already long ago for some reason any.

    There is therefore no reason to keep the old HDD Recory on E: folder.
    It is completely unnecessary and I would like to remove this folder without formatting E:.
    However, although I work with admin rights, this is strictly rejected by the system of Windows 8.

    Is there any idea how to get the access rights to delete the HDDRecory folder?

    Best regards and thanks for the help!
    Gernot

    So far I didn't test these actions, but if you have administrative rights, maybe it's possible to delete certain partition and without changing the ability to create a new.
    Try to do this, use the option of disk management in computer management.

    Of course before trying to do this backup all other important data stored on that partition.

    Please let me know if it will work.

  • Satellite Pro U400 - how your last long battery time

    Hello everyone!

    I bought a toshiba laptop (satellite pro u400), but I think he has a very short range, about 1 h.
    Someone like that have a computer toshiba laptop?

    How long your battery last time?

    Thank you!!!

    GLO :-)

    Hello

    I have a U400 and I also use it with the battery.

    I use it for surfing the internet and writing
    Execution of the laptop with battery I always set the brightness to the minimum, and in this case I can use it for about two hours.

    If the screen light is set to max and the HARD drive and the CD/DVD drive works then your battery time will likely decline at a time.

    So, as you can see the battery time work depands defintialy on the use of the laptop...

    Welcome them

  • Satellite Pro U400-11V - Installation using the floppy from XP downgrade

    Hello

    Yesterday I had to replace my HARD drive once it is simply dead.
    I didn't know it was a big deal that I had lost any data.
    I would just like to re - install Windows XP using the Downgrade XP disk came with the laptop.

    It turns out that: I have about 10 discs Downgrade XP each almost identical looking and everyone, I assume, associated with a particular Toshiba laptop my company bought at some point.
    Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V.

    What I did:
    -We selected at random.
    -Installed Win Xp Pro.
    -Tried to activate Windows.
    -It indicates that the product key is bad (and some drivers are missing, so it is obviously not the disc that came with the laptop, but he got me so far).
    -Correct the product key according to the key that is located on a sticker at the bottom on the laptop *.
    * On the sticker, this key is an OEMAct Windows Vista Business key, the OS of the laptop came with.
    -L'activation of Windows will not accept the key to the sticker.

    So I have 2 questions:
    1. is there another method of re - install Windows XP Pro using the * original * Downgrade XP disk that came with?
    2 (leading to #1) is it possible to identify which drive is the one shipped with my laptop? Perhaps by checking some serial numbers on the disc?

    Worst case scenario I'll have to make (at most) 10 Windows installs until one works.
    But I was really hoping some help & advice.

    I can't wait to hear all the answers,
    Thank you!

    Hello

    > I have about 10 discs Downgrade XP each almost identical search and each, I presume, associated with a particular Toshiba laptop my company bought at some point.
    > Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V
    Your ad is really funny :D

    I put t know how your Win XP drive looks like. My laptop came with the recovery disk and it was mentioned on the label that it's Toshiba recovery disc.

    In addition he s already enabled so I put t need to activate the operating system by using this key.
    Also, the key at the bottom of the unit belongs to the preinstalled operating system and it will NOT work with the new Win XP or another operating system.

    But back to your Win XP disks
    I recommend that you check the single disc... maybe a disc is already activated

  • Can Satellite Pro U400-13I - I reinstall the CD/DVD creation software?

    Hello

    Can someone help me with my problem.
    I have a Satellite Pro U400-13I and use XP he. As I experienced some problems with the creation of CD, I decided to uninstall and reinstall.
    However, I am unable to find the program to install only the software above without having to run the XP DVD recovery (which will format the entire HARD drive), I have a lot of data and some third party software that I do not want to miss, so is unable to format the drive HARD rightaway.

    Would appreciate a solution

    Thanks in advance
    SJ

    What program you mean exactly for creating CD/DVD?

    If you mean the Toshiba disk creator I think it can t be downloaded. I checked from Toshiba Web site but I can't find it.
    But you can use another program to create CD/DVD, for example Nero or CD Burner XP (freeware).

    I hope I could help a bit.

  • Satellite Pro L300: How to get the sleep settings

    Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

    But now, he's just on stand by.
    How can I get this back to how it was (having to press the button to exit stnd - in)-help!

    I tried to turn off Toshiba power saver and using the windows settings but nothing
    I have treid working :(

    Can anyone help?

    I get at the end of my home with this computer laptop blinkin :(

  • Satellite Pro U400 freezes sometimes when the power cord is plugged

    Hello! I know that this problem has been addressed here and there, but I'd like to open a new thread about it. Here's the scenario.

    I recently bought a new Toshiba Satellite Pro U400-247 (PSU45E) with two batteries: (a) the original, (b) in addition purchased authentic of Toshiba PA3636U-1BRL, 7200 mAh. The laptop has the latest BIOS (4.80) and the latest drivers downloaded from Toshiba and installed (ConfigFree is not installed). I use XP Pro SP3 (own installation by myself). Everything works fine, except for one thing:

    Sometimes (but), when the laptop is running on battery power and I plug in the power cord, everything hangs and I have to restart. A few observations:

    It tends to occur more frequently when the low battery alarm has rung;
    (b) it seems to happen more frequently with the 7200 mAh battery and less frequently with the original battery.
    (c) it seems to happen most often when a USB device (mouse, for example) has been linked to the laptop, but it is not a rule;
    (d) it seems to happen less often when I move the mouse USB at the time wherever I am connect the power cord.
    (e) I've experimented a lot with Toshiba PowerSaver settings (for example to change the levels of CPU for my profile) but nothing I changed seems to change the situation.
    (f) I tried different suggestions I found on various forums, but nothing works (for example the BIOS settings);
    (g) otherwise, I can say that I have not really seen a smoother computer, everything works really fine, no other problem :)

    Everything that makes me think it must be some sort of bug in the drivers of motherboard driver PowerSaver or other drivers interact with battery, CPU or possibly USB. Y at - it an explanation to this problem and can it be rectified in some way (for example, by providing a driver update)?

    Hello

    First of all, I never heard a driver from the motherboard.
    There is a drive chipset or a graphics card driver. There is no such thing as a driver of the motherboard!

    Look, man. laptop should work fine even the AC adapter is connected or not connected
    If the laptop freezes while there might be a software problem, but in my opinion it could be hardware problem
    You must reinstall the operating system if the laptop would freeze always the issue might be related to hardware

    First of all the memory modules and AC adapter must be verified.
    If the problem persists even using new modules and AC adapter, motherboard may be affected.

  • Satellite Pro L40 - how to enable the WLan using ConfigFree

    Can you help me?

    My English is bad I do not end.

    The question is:
    My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

    Help please!
    I want to know what's wrong

    Thank you!!

    Hello!

    Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
    Her check first because otherwise, you can get the WLAN to work.

    In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
    Check it!

    After this Free Config should find your WLAN router if you are in the range of that.

    Good bye

Maybe you are looking for

  • Satellite A100-784 - how can I make another copy of my recovery disc DVD

    Hi all I have the Satellite A100-784, which comes with Vista Home...How could I make another copy of the DVD from my recovery disc? Also, I don't have the Toshiba Recovery Disc Creator... is downloadable?

  • dev Alpha: password after update problem

    Finally I have to upgrade to the latest Alpha of Dev. Now, I have a problem: as soon as there is on the lock screen. To unlock, it asks for my password. The password is entered before the upgrade, it is simply 'a '. But now when I use it to unlock, i

  • Help on Blogger problem?

    It is screen prt of my blog: http://3.BP.blogspot.com/-HLX3jF5S5IA/UU7QDEo_0iI/AAAAAAAAAH4/eta2Celr7Zk/S1600/%d0%91%d0%B5%d0%B7%D1%8B%d0%BC%D1%8F%d0%BD%d0%BD%D1%8B%d0%B9.PNG I made my blog larger, but the part I painted orange is not wide. Can I make

  • Try to find a solution/Forum for task to save a copy of Acrobat 9

    I have plus 3,000 PDF I need to Remove the 'extended rights' of. I searched, and the only solution I've found suggest opening one by one using 'Save a Copy' that is in me forever! Are there no other option available for this task?Thanks in advance fo

  • Help Adobe cancellation!

    OK so I tried and try to cancel my plan is a plan of a year and I remember to sign up for a month and now it stops to load me and im getting real frustrated on this subject