Satellite S1900-101: how to open and replace the RAM?

Similar Questions

• Satellite A40-121: how to open and replace the cooling module

  Hi all

  I have a Toshiba Satellite A40-121 for 4 years and was very happy with his performance so far. Just recently, one of the fans is undeliverable noisy and very quickly becomes very hot, so I think I have to change. (I'm not a computer technician, but I live somewhere in the middle of nowhere in China, no support available at all...).

  I opened my laptop, but now the covering is always fixed somewhere in the Middle, no screws left!

  Do you need some pictures or even a manual how to open my laptop? I could send the vehicle damaged to friends in Germany and they would try to get a new...

  Thanks a lot for your help!

  Best
  MKD

  As far as I know that two lovers coling are fixed by two screws. When you remove the two of them, you should be able to remove the cooling fans. Put simply irrelevant.

• Satellite A30 921: how to remove and replace the memory?

  Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.

  Thank you in advance.

  Hello

  There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5

  Good bye

• Laptop HP Touchsmart 15-D020: how to remove and replace the keyboard on laptop HP Touchsmart 15-D020NR

  I spilt a drink on my keyboard and now I can not turn off the caps lock and a number of keys does not work. I need instructions on how to remove and replace the keyboard frame. Thank you.

  On your page of support-look for Maintenance and Service of Guide in the manuals.

  http://support.HP.com/us-en/product/HP-15-D000-TouchSmart-notebook-PC-series/6627588/model/6761859/manuals

• Have need for instructions how to open and clean the fans on Satellite P10

  There are two fans under my P10-304, however, the right fan doesn't seem to work and the keyboard rankles enough easily. Even with a cooler, it doesn't help much. I wonder if I could open fans and clean them and also the heat sink? If I can, some instruction please.
  Thank you very much

  We just cleaned the radiator and fans of our Toshiba Satellite p10 it overheats and turn off, especially when we tried to launch a DVD or new software... so frustrating... The radiator was full of dust was so obviously draconian need a cleaning. Now, we can not log in. The screen remains black and nothing happens except the blue light comes on, the cooling fans stir a bit... but that's all... BIG SCREEN BLACK WHITE FAT... ARGGHHHHhhhh what we do... No matter what your computer gurus help toshiba would be greatly appreciated... NL

• Now 8.0 for Mac Firefox hangs every time it opens, and replace the soft, disabling report, restart the Mac (latest system in use) do not fix the problem.

  I was checking a site of the French hotel, 8.0 Firefox crashed and now cannot be restarted without crashing, even after replacing the application with a new 8.0 file.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.com/kb/Firefox+crashes

  If you have submitted incident Breakpad reports then validate the ID of one or more reports of incidents Breakpad (bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx). You can find the ID of the crash on the topic submitted reports: page crashes. You can open the topic: blocking the page through the address bar, you open a Web site.

  See:

  • http://KB.mozillazine.org/Breakpad (Mozilla Crash Reporter)
  • https://support.Mozilla.com/kb/Mozilla+Crash+Reporter
  • https://developer.Mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

• How to remove and replace the missing keys Sat A30

  Hey folk,
  I guess that sounds simple, but I have just no idea.
  Broke and need to replace a couple of keys on my keyboard UK A30. At present, all what I have in place are the rubber bubble popper & locators of metal set in the empty spaces.
  The keys in question are the shift (I have no u lying in spring form) and? + / keys of RHS of KB.

  I have complete German and American replacement KBs, but to remove the necessary keys on the part and repair the United Kingdom KB.

  I don't want to end up with 3 broken KBs

  So I need clear and detailed instructions on removal and then reset the necessary keys.

  Any help or direction to the site that contains this kind of info would be greatly appreciated. Or response message directly by email to

  [email protected]

  Thank you very much.
  sparkiefive

  Hello

  I think you should go to a Toshiba Service partner.

  You can find them here:
  https://EU.computers.Toshiba-Europe.com
  Downloads support & - find an approved service

• How to remove and replace the internal Blu - Ray DVD RW drive on laptop HP HDX 16 t

  The internal dvd player does not work and I would like to remove and replace it myself. If anyone has a method step by step for me, or links to pictures or videos of the steps, I'd appreciate it. Thank you

  RayCE

  There is a screw on the bottom of the laptop that holds the drive in the screw about 4 inches from the front of the dvd player door.on the botom of the machine, remove the screw and remove the disc.

• How to open and copy the smart object

  Hello

  I read some topics on smart objects, but I have not found a solution to my problem.

  1. I need open the smart object layer

  2 copy all the layers of the smart object to another file

  Thank you

  Let's say you have two open documents. The first open doc is the one you want to fool the layer to the second doc is active and the layer you want to dupe is the activeLayer.

  app.activeDocument.activeLayer.duplicate(app.documents[0]);
  

  Of course, you can change the document references and layer as needed. However the layer not fool must be in the activeDocument.

• How to remove and replace the hard drive on a desktop Pavilion m9350f computer?

  not boot BIOS says search for device.  . Suspect problem is intermittent

  ShortTimer,

  I was trying to be polite and doesn't cause any anxiety. I asked if the BIOS can 'see' the hard drive and DVD player. (Forget the PMD, USB).

  As your motherboard is a M2N78 - LA. There was a race of (IMHO) production of chips from NVidia controller that were defective. Only this can explain the success or Miss boards failed in these units:

  This series of motherboard has been installed in many different models of HP computers. There are problems.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see/TD-p/181716

  Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.

  a4316f

  e9140f

  p5210y

  p6130y

  p6142p

  p6157c

  p6210f

  p6210y

  p6214c

  p6310y

  p6320y

  a6720y

  m8530f

  m9120y

  m9350f

  m9517c

  m9530f

  m9840sc

• HP 700-330qe: how to disable or replace the SSD on HP 700-330qe

  Help for my HP 5 months! It kills Me!

  I bought a HP 700-330qe in 2014 from Amazon and just started getting SMART of Windows hard disk errors whenever my computer restarts, telling me that the hard drive failure is imminent. He also tells me to shut down the computer immediately, save it, contact the manufacturer, etc. Never seen it in any PC I owned before. Naturally, I freaked out and did some internet research, discover that it is relatively easy to clone and replace a hard drive. I ordered a new hard drive Western Digital 3 TB of Amazon, a docking station for disc brand cable hard of Amazonia and downloaded the Macrium Reflect free disk management software.

  Items from Amazon arrived in a few days and I got to work making a clone of my one and only hard drive. Clone was made with little problem. Shut down the computer, it opens and replaced the old hard disk with a new one. Start the computer to the top and got the same message on imminent hard drive failure! So I paid more attention to it this time and looked up the model number in the warning message, which was: ScanDisk SDSA6DM - 016 G-1006. I Googled that and found it was the disk solid state drive (SSD) used as a cache to speed up certain operations. Arrgh.

  I stuck my old hard drive in the hard drive docking station and was ready to be cloned partition SSD and all partitions on the hard drive to the hard drive and the removal or at least unplug the SSD drive to get rid of this problem. The software told me that the SSD is shaped as MPR (or something like that) while the main hard drive is formatted as GPT, which are different types of hard drive, formatting, so you cannot copy these different types of partitions on a hard drive.

  So here's my options as I see them:

  (1) I have to either disable the SSD, but I don't know how and I don't know if the computer will always start the same. Windows is partially installed on SSD? I do not know.

  (2) to clone and replace the DSS about the same way I did with the main hard drive. I can get the SSD according to Amazon for $49: Kingston Digital 60 GB SSDNow V300 SATA 3 2.5 (height of 7mm) with adapter Solid State Drive SV300S37A / 60G.

  For the option #2 above, the only problem is that I have no idea where the OEM SSD of ScanDisk is currently installed in my computer! It is in the hard drive cage? I don't see anything else installed there. I thought it was in the cage directly above the hard drive cage, but I think that what I was looking at was the front memory card reader/USB ports. I don't have on CD Player installed and I can see where it is. Help!

  PS: I also downloaded EaseUS Partition Master 10.2 and it allows to analyze the SSD drive. While it was scanning it found 9 bad blocks (on tens of thousands of blocks), but when he finished the analysis it says there is a lot of blocks. For this to happen on an SSD, which is supposed to be more reliable than hard disks of small, to make this so much more aggravating situation. At least, I upgraded my hard drive 2 TB to 3 TB and know now that I can do. Sigh.

  Yes, I had a frusrtrating very experience with HP customer support, even after it was raised to a case manager based in the United States, who called me home. She found no part at all in its computer system and wanted to send me in my whole PC to a service center customer (it was still under warranty) which would take at least 3 weeks. I said no and went forward and the DSS out of my computer. I stopped receiveing the error messages and did not notice a slow down in performance, but went ahead and bought and installed this one, just in case it actually provides an advantage: My Digital 32 GB SSD Bullet Proof (on Amazon for $25).

  As a note to end funny to this drama, about 6 months after my discussion with HP support I describe above, I have randomly mailed an envelope of HP with the exact 16 GB SSD, they said that they didn't in their system. It also included an envelope to return my faulty SSD and a stern note saying if they do not receive the defective item within 3 days my credit card (that I never gave them) would be charged. I threw a long time ago the defective item and just throw it back into a drawer... or maybe that I returned it in the envelope for return of defective product? I don't remember really.

  In any case, it was a horrible customer service experience, and since then I have another HP Envy (my PC 3 year to my son) have a hard drive and video card fail at the same time. I replaced the two after a few problems, but no matter what I do, it can get its setup dual monitor want to work more. I tried several video cards and nothing.

  All of these factors combined caused me write off HP for the future PC purchases. The guys in my company IT say it's the reason why we only buy Dell computers at work (we have hundreds of maintain). They do not use strange pieces like these small SSD cache records, and their parts are standard and easy to replace because of the case. I'll either get a Dell or ASUS as my next PC.

• Need recovery for my Satellite S1900-101

  Missed my CD of restoration came with my laptop and I am facing problem in my laptop. I want to get back, but I'm not finding my software case. But the key to the software is available with me I pasted on the back part of my laptop.

  I asked in some pc shops & they loaded some software, there by some functions like music before keyboard does not work and my laptop has become its slow. I would kindly ask you to provide me with a copy of the recovery CD for my toshiba satellite s1900-101 laptop that I can use my original key to load the same.

  Please help me to get solved my problem,.
  Thank you
  Gratien

  Hello

  the problem is that no one here could provide you with a recovery disc because it's just a toshiba user forum and not a support line for users of toshiba.

  You have still a few options to make your system works, if you have an original disc of windows then install and download the drivers and tools of this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Otherwise, you can contact a local asp, they can sell you a recovery cd, if you wish.
  To find a servicepartner you can use the following site to find the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  In the case of any question: just do it. Ask. ;)

  See you soon

• How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, one

  How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, request adobe livecycle to settle. Help, please.

  Best way to do is the following:

  -Open the PDF in Acrobat.

  -Go to tools - form - form more Options - export data.

  -Save form data in an XML file somewhere on your system.

  -Open the XML file in a plain text editor (I recommend Notepad ++).

  -Let's say you want to replace all the years in dates "2013" to '2014 '. Do a global search & replace '2013-' to '2014' - (I added the dashboard in order to ensure that only the date fields are changed).

  -Save the XML file (maybe under a new name).

  -Go back to the PDF file and now go to tools - forms - more form Options - import data.

  -Select the modified XML file and import it.

  -Fact!

• I want to open and read the tax document encrypted from my class last year, how can I do?

  I want to open and read the tax document encrypted from my class last year, how can I do?

  Do you remember the password?

  Did you change your computer, or reinstall Windows after you saved the file?

  What version of Windows you have now?  And what version you have when you saved the file?  Specify the service pack level.

  How do you encrypt and save last year?

  What tax preparation software you use?

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.