Satellite T230-12 q - cannot load the battery

Similar Questions

• Satellite Pro U400-12A - cannot load my battery

  Hello

  I have a problem with my battery. I bought a toshiba laptop has named satellite pro U400-12 or something similar.
  But so far I was unable to load the original battery.

  The light orange is always burn for about 10 minutes when I connect to the network and then starts flashing.
  The laptop does not even only by battery, even if it has been 'charge' the night...

  Does anyone have a nail, what is happening with my laptop?

  I would be very grateful for any helpful advice...

  Thank you

  Hello

  You must update the BIOS in order to solve this problem.
  I've got U400 and have solved the similar problem, updated the BIOS!

  Check it!

• Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

  I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

  The error number (11122) cannot load the bitmap file. Height max = 100

  The hard drive has now been deleted and I can't sent this message to reformat.

  Can someone help me on this please.

  Hello

  Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

  Have you noticed a similar problem before?
  Are you using the original disk or some copy?
  Is there a problem with the HARD drive?

  Please do a little bit more about these things.

• Satellite A200 - cannot load the keyboard and touchpad drivers

  Hello

  I have SATELLITE A200-10W, HOME PREMIUM installed with SP1. I use it more than a year. All of a sudden it happened that my laptop stop responding and then I rebooted.
  My touchpad and keyboard stop working, but I connect as a user of the window through KEYBOARD to the SCREEN.
  In Device Manager I CAUTION icon on the keyboard and inside, it says under DEVICE STATUS which

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (CODE 39). »

  i8042prt.sys and kbdclass.sys files are attached as a driver in detail.

  My keyboard works during BIOS and even when I boot with the CD bootable operating system WINPE, my keyboard is not working, even typing everything inside this environment, but not in the normal window.

  I tired restore my laptop
  LAST GOOD CONFIGURATION
  Apply unsigned drivers
  Safe MODE (does not work yet)

  Downloaded some software like driver detected etc, but... NO RESULTS.

  I don't want to go for WINDOW RECOVERY CD for OS to re - install
  I have a large number of parameters, I don't want to erase...

  IS THERE A SOLUTION FOR IT?

  My warranty ended already after one year

  pls help and answer...

  That s a great info. Thanks for the clarification!

  Good bye

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Cannot load the class driver: com.mysql.jdbc.Driver

  Hello
  
  I am new to Oracle solutions and I am trying to deploy a simple ADF Application that retrieves data from a mysql database, I already set up the mysql connector in libraries, but when I try to deploy the application, the following message appears for me:
  
  
  Using the 7101 port *.
  C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd
  [waiting for the server to complete its initialization...]
  .
  .
  Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
  .
  Start mode of WLS = development
  .
  CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
  .
  Path = C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\Program Files (x86)\SenchaSDKTools-2.0.0-beta3; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files (x 86) \Microsoft ASP.NET\ASP.NET Web Pages\v1.0\; C:\Program Files\Microsoft SQL Server\110\Tools\Binn\; C:\Program Files (x86)\GtkSharp\2.12\bin; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  Java version "1.6.0_24".
  Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
  Java Client VM (build 19.1 - b02, mixed mode)
  WLS starting with line:
  C:\Oracle\MIDDLE~1\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 - Djrf.version=11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~ 1-Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\FBELLUCO\AppData\Roaming\ JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~ 1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\ GMDS-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
  < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
  < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
  < 19/08/2012 BRT 16h40min53s > < Info > < WebLogicServer > < BEA-000377 > < ہ WebLogic Server Java hotspot Client VM Version 19.1 - b02 Sun Microsystems Inc. >
  < 19/08/2012 BRT 16h40min53s > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >
  < 19/08/2012 16h40min54s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 19/08/2012 BRT 16h40min54s > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
  < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
  < 19/08/2012 16h40min54s BRT > < opinion > < Log Management > < BEA-170019 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
  < 19/08/2012 16h40min57s BRT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
  < 19/08/2012 16h41min00s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
  < 19/08/2012 16h41min01s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < MessageLocalizationHelper > < getLocalizedMessage > O recurso pacote 'oracle.jrf.i18n.MBeanMessageBundle_pt_BR' com a chave 'oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets' nao faith sown.
  < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
  < 19/08/2012 16h41min06s BRT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [11]" now listen on 0:0:0:0:0:0:0:1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < WARNING > < Server > < BEA-002611 > < Hostname "FBELLUCO PC", corresponds to multiple IP addresses: 192.168.2.165, fe80:0:0:0:5d2e:304 b: c1ee:fef9 12, fe80:0:0:0:140f:246e:4e4b:5580% 18%, 2001:0:4137:9e76:140f:246e:4e4b:5580 >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [10]" now listen on 127.0.0.1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on fe80:0:0:0:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on fe80:0:0:0:0:5efe:c0a8:2 a 5:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.168.0.135:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 2001:0:4137:9e76:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [6]" is now listening on fe80:0:0:0:5cee:582d:c1d2:274 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [9]" is now listening on fe80:0:0:0:5 ca 1:539 a: e6ac:87 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [7]" is now listening on fe80:0:0:0:9808:46 d 3: f632:c499:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [8]" now listen on fe80:0:0:0:5d2e:304 b: c1ee:fef9:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on fe80:0:0:0:5d5a:6be2:c66e:a30e:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.168.2.165:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: 16364 ms.
  IntegratedWebLogicServer has begun.
  [Run application on Server Instance IntegratedWebLogicServer ASSANE...]
  [16: 41:08]-deployment began. ----
  [16: 41:08] the target platform's (Weblogic 10.3).
  [16: 41:09] recovery of the existing application information
  [16: 41:09] analysis of the dependence running...
  [16: 41:09] deployment 2 profiles...
  [16: 41:10] wrote on the Web for C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI\ViewControllerWebApp.war application Module
  [16: 41:10] wrote the Module Enterprise Application to C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI
  [16: 41:10] Application deployment...
  < 19/08/2012 16h41min11s BRT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the ASSANE application is not versioned. >
  < 19/08/2012 16h41min11s BRT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1345405270810 'for task ' 0'. Error: ' weblogic.application.ModuleException: '
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
  at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
  to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
  at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
  Truncated. check the log file full stacktrace
  >
  < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task "ASSANE. >
  < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
  at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
  to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
  at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
  Truncated. check the log file full stacktrace
  >
  [16: 41:11] # incomplete deployment. ####
  [16: 41:11] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  # Cannot run application ASSANE due to the deployment on IntegratedWebLogicServer error.
  [Application ASSANE stopped and cancelled Server Instance IntegratedWebLogicServer]
  
  Thank you!

  Add
  mysql_jconnector.jar in the C:\bea\jdeveloper\\system11.1.1.5.37.60.13\DefaultDomain\lib folder

• Equium - Windows cannot load the device driver for USB dongle

  I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  -what it means and how can I solve this problem?

  Hi Ozcat,

  What USB dongle is that exactly?
  What cell phone do you have?
  What operating system is installed?
  Have you already tried to reinstall the driver for USB dongle?

• Intel Pro/Wireless 3945ABG cannot load the driver

  Wireless worked fine since I bought this laptop

  Now it has stopped working and has a yellow exclamation mark in Device Manager - it says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  So I uninstalled the device and check the box that says "Remove the driver for this device", then reinstalled the latest version of the driver on the Toshiba site 11.5.0.32.

  Windows Vista detects new hardware and install the driver, but fails with 'Windows found driver software for your device but encountered an error trying to install it. The system cannot find the file specified. "

  All ideas

  Remove the wireless network adapter in the device, download manager driver the latest from Intel page and repeat the procedure of installation of the driver.

  Good luck

• My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  First of all, stop plugging him. Then, make an appointment at the Genius Bar at your local Apple Retail Store or contact Apple to arrange for your sent phone service.

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• blue screen after Ko 2840149, error - "STOP: c0000218 {Registry hive failure} the registry cannot load the hive (file): \systemroot\system32\config\SOFTWARE.

  After I installed security KB2840149 on a 2008 VM w/exchange server that is running on the machine of Hyper-v server 2008 I'm dead in the water w / E-mail down hard.  The virtual computer is in a reboot cycle bluescreening before I can get anywhere.  Tried the last well known - no effect.  Safe mode - so bluescreens.

  BlueScreen info:
  STOP: c0000218 {Registry hive failure}
  The registry cannot load the hive (file):
  \systemroot\system32\config\SOFTWARE
  or its log or alternation.
  It is damaged, missing, or not accessible in writing
  I saw that it was a patch of replacement for a patch that crashed a lot of PCs.  Since there is no history on this patch, I wanted to check in a see what is the best way to fix this on a virtual machine?

  Being not so deep on VM, I wasn't sure if there was a better way. But I just put the virtual machine to load 2008 iso and then made the standard repair for registry problems off the coast of the article below.

  Of http:

  If the Windows registry is slightly or moderately damaged, you may be able to restart the computer in safe mode and use system restore to restore the registry from the computer to the last known good configuration. However, if the Windows registry is seriously damaged, all types of logon will be prevented. Trying to connect to Windows causes the system fails, then restart. In this case, you will need to boot the system into the recovery instead of Windows Console. Once in the Recovery Console, you can use the Startup Repair tool. Startup Repair tool automates common diagnostic and repair of the installations of Windows tasks starts longer.

  (a) start your Windows Vista or Windows Server 2008 DVD
  (b) on the first Setup screen click Next
  (c) in the lower left corner of the screen, choose "repair your computer".
  (d) on the System Recovery Options screen, select your Windows installation and then click Next
  (e) click on "Command prompt".
  (f) go to X:\sources\recovery > startrep.exe
  (g) this will take some time but will look at any registry related issues.

• corrupted: WINDOWS\ SYSTEM32\ CONFIG\ SOFTWARE Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): SystemRoo

  corrupt: WINDOWS- SYSTEM32- CONFIG- SOFTWARE Stop: c0000218 { file registry failure} the registry cannot load the hive (file): any on windows server 2003.  How can I fix this

  Hello, getin99

  For help on Windows Server, you need to create a new post on the TechNet forums at the following address: http://social.technet.microsoft.com/Forums/en-US/winservergen/threads

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer