Satellite U200-126 - copy of PCMCIA takes a lot of time

Similar Questions

• Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the fleeting problem.

  Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the rest of the problem.
  As a test, I downloaded Chrome and it is much faster.
  But I love FF and would be very happy if you can help me solve this problem.

  Hi Reos,

  When you reinstall Firefox it always uses your old profile with all the old things that you had. That said, you're lucky, there is a new feature that lets you "Reset" of Firefox. This will remove some of the pieces that might cause problems while it keeps your bookmarks and other important things safe.

  Check it out and let me know if it works: Refresh Firefox – reset the parameters and modules

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• Windows 7 and update MSSE take a lot of time

  Hi, I have reinstall my windows 7. But, when I try to check the updates he comes to see the verification of updates for a long time. I'm trying to update Microsoft Security essentials too, but it just search for updates and it takes a lot of time too. But, when I restart the Windows Update service, and then start the download of the Microsoft Security Essentials updates and install it, but not for windows, it keeps looking for updates when I try to update. Microsoft Security Essentials does not download the update that automatically even my computer is connected to the internet, I have to press the Refresh button on MSSE, and sometimes I need to restart the windows update service too.

  When I do the update for windows for the first time, Windows update tell me to install the Windows Update Agent 7.6.7600.320. And install it.

  Please, please help. Any who...

  See: search for Windows updates takes forever?-a possible solution

  See also Windows 7 update holding scans always? KB 3153199 can solve the problem

  ===

  Update Microsoft Security Essentials FAQ

  Microsoft Security Essentials consolidated FAQ

  Troubleshooting General error while updating

• My win 7 laptop HP takes a lot more time at the stop

  MY LAPTOP ABOUT 4 WEEKS IT Y HAS SUDDENLY STARTED TAKING AGES TO STOP

  CONFIGURATION SYSTEM USED IVE, DISK CLEANUP, DEFRAGMENTATION IT REGUALLY.

  CAN ANYONE ADVISOR AS TO WHETHER BACKGROUND PROGRAMS COULD BE INITIALLY - AND HOW DO I FIND AND REMOVE?

  MY LAPTOP RUNNING WINDOWS 7 HOME PREMIUM SUDDENLY TAKES A LOT OF TIME DOWN

  Here's one thing you can check which will give information in some cases: http://windows.microsoft.com/en-US/windows7/Why-wont-my-computer-turn-on-or-off-quickly

• Table statistics generation takes a lot of time in 10g R2 (10.2.05)

  Hello Oracle Experts!

  Need your urgent help...

  Question - generation of Table statistics takes a lot of time in 10g R2 (10.2.05) and even ends in mnts in a different database. As well the database are hosted on the server VM, RAM, CPU, storage and database initialization parameters are the same.

  Table - size 34 GB

  Name of the table - SLPDOCTAX

  SQL - exec dbms_stats.gather_table_stats (ownname = > 'FAST', tabname = > 'SLPDOCTAX', estimate_percent = > 30, cascade = > true, level =)
  (> 5, method_opt = > 'for all COLUMNS INDEXED' granularity = > 'ALL');

  Measures taken so far-

  1. 1) checked the IO by the dd, no problems on the side of DISK command
  2. 2) use memory and CPU as normal

  Please advise what measures must be taken to solve this problem

  Dear all,

  We have identified the problem... It was the index and even has been resolved by rebuilding the index.

  Rgds

  Farvacque

• Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal?

  Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal?   It's been over an hour...

  then you have probably lost connectivity.  If you are using a wireless connection, try a wired.

  If necessary, you can use a download with direct download manager,

  Downloads available:

  • Suites and programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5 | 4 | 3
  • Captivate: 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Upgrade Vista on the Satellite U200-126

  I would like to tell my experience with the updated BIOS with my Satellite PRO U200-126.
  I bought this computer last year, this is a Core Duo, not a Core 2 Duo processor. It has been working perfectly with Windows XP Professional.
  All my problems began when I tried to upgrade to Windows Vista.

  I bought an upgrade of RAM, because my computer has only 512 MB. I removed the keyboard and installed the additional memory module... It is ok. I bought a new SATA hard drive 160 GB, to install the new operating system on it. I bought Win Vista DVD. I downloaded all compatible applications and drivers from the TOSHIBA web site. I put the upgrade, so I started.

  The first step was to upgrade the BIOS. My U200 had BIOS version 1.40 installed, and I flashed the computer with version 3.40 available in time on the Web from Toshiba website. I installed the new hard drive and started a new installation of Windows Vista.

  The installation went smoothly. I upgraded to Vista with the patches required to MS and installed all Toshiba drivers and applications in the recommended order.
  It was weird that the Toshiba web site had the drivers for Atheros WLAN card, while the U200 uses the Intel 3945ABG. I skipped installing these drivers. Today, I see that they have been removed from the web site. Good shot, indeed, Toshiba.

  The first thing that I noticed that the ConfigFree and Intel Proset application have been crippled, if compared to those that are available on Windows XP. The ConfigFree Radar, for example, showed that the WiFi network name, not the single Access Points. Intel Proset was not showing the name of Access Points. It's ok - when a WiFi network has only one access point, but the majority of WiFi networks has several access points...

  I learned that it is because Windows Vista manages directly, roaming access points while under XP, this operation has been completed the network adapter and its driver.
  Since all software WiFi for XP (Netstubler's) work doesn t under Vista, the only way I was able to locate access points was by typing a command netsh prompt.
  In my view, that Toshiba should redouble their efforts on their new software WiFi for Vista.

  I was also confronted with other issues, but those issues Vista and not Toshiba. I want to only quote the new Vista network discovery protocol, the NTLM 2, which is incompatible with existing network resources like XP - 2 K based computers and Linux - NAS function. Editing the registry shown on MS Technet for that matter, t has failed. If all goes well, a MS Service Pack, in the future, may solve this problem of backward compatibility.

  I also noticed that the Toshiba power management utility had become a subset of Vista power management, it was more than the very neat screen that I liked a lot. In addition, the default value of mapped Windows Vista power button suspends - and not offshore.

  Next - I noted that the Fn buttons didn't work unless Toshiba Flash Cards have been loaded and activated. I didn t like Flash cards, because they use a huge 50 MB of RAM. This problem has been resolved with a different BIOS upgrade to version 3.50, I found on the Web from Toshiba site.

  Then I started to use the computer. I loved the Aero Interface and the robustness of Vista. I had to disable user account control, since then has been a little too much security, at least for me.
  Then using the computer on battery power, closed the lid, and computer is spent in standby mode. Later, I opened the lid and started working again.
  Here, I realized something was wrong. To make a long story short:
  1. after suspend and resume, the computer will turn off more.
  2. after him suspend and resume, battery life has been reduced.

  It didn't take much to realize it was a BIOS problem. I did a clean reinstall of Vista and the problem remained. I had to physically turn off the computer with the hardware button, because it does not turn off when asked so, but only after an interruption.

  At this point, I put in the old hard drive with Windows XP. The computer started fine, any recognition of the fingerprint was extinguished.
  BIOS upgrades kill association of OS fingerprints, even if doesn't erase the fingerprints of the probe, information stored fingerprints are no longer usable which is from a pint of view security.
  Then, I closed the lid of the computer, and he went to suspend. In XP, the computer with BIOS version 3.50 would not again. It would be rather reset and Windows XP was perform a restart of the recovery thereafter. The Bluetooth radio has been messed up on every reboot.

  At this point, my U200 was not usable on Vista and XP. Toshiba Europe web site doesn't allow you to download of old BIOS, neither Toshiba offers a utility to save the old BIOS before flashing a new. I was ready to send to the home computer.

  Fortunately enough, I found BIOS version 1.40 on the Toshiba US website. It was not exactly the same as I had before because it showed a generic start-up Logo Intel, while my original BIOS showed the Centrino Duo logo. The version and date were OK, and I flashed the BIOS on my computer. He went everything is OK

  With BIOS version 1.40, Windows XP worked perfectly as before. Under Vista, the computer turning off after an interruption / resumption.
  The Fn buttons work properly even with loaded flash cards with BIOS version 1.40 under Vista, the brightness of the screen was not controllable - even from the utility to save energy.

  At this point, I left 1.40 BIOS and XP on my computer. I'll wait for Toshiba release a compatible BIOS back and the MS to release a Service Pack or a hotfix for the problem network.

  At the end of the story, I would like to add a few comments.
  I saw the sale the new U200 with Windows Vista preinstalled Toshiba. The new U200 has a Core 2 Duo processor, so I guess that the motherboard will be somewhat up-to-date.
  I put t have a new U200, but I think that this new version doesn t suffer from the issue of suspension-recovery.
  If anyone from Toshiba is reading this post, I would like to be sent by electronic mail to the original version of 1.40 BIOS that was installed at the factory on my machine, I mean the BIOS showing the Centrino Duo logo colorful start. My email is: antonio.maglione15 (at) libero (dot) it
  Also, I ask Toshiba for check the BIOS version 3.50 on an older U200 with processor Core Duo and provide to the public a compatible version back from the BIOS.

  Kind regards

  Antonio
  ROME (Italy)

  Dear Antonio

  Thanks for you long interesting history.
  As you probably know not this forum is just a user-forum user and I'm afraid that you won't find anyone from Toshiba here m.
  Anyway, as you said on the Toshiba page you will find only the latest version of the BIOS and the older versions are not available. This real s. Several months ago, I tried an older version of BIOS for my laptop but without to succeed.
  A hint; The authorized service provider may downgrade the laptop to the old version.

  In any case, I guess many Vista tools and utilities that are on the market are in a first time and updates might solve some strange behaviors.
  I noticed that the BIOS updates are published from time to time. Maybe the next update of the BIOS will provide some improvements.

  PS; Don't download and install the BIOS from other sources. European portable computers to use the BIOS from the Web of Toshiba Europe site!

• Takes a lot of time using forall delete

  Hello

  I'm insertions and deletions of rows via forall. Insert taking less time to insert the lines but by coming to

  delete, it takes more than 5 days, a lot of time to remove 18.5 millions of rows in a table using forall.

  the main table with 70 million lines.

  the code is...

  Get the ref_typ COLLECT LOOSE l_id_tbl LIMIT 10000;

  Start

  FORALL i in 1.l_id_tbl. COUNTY

  INSERT INTO change_test (id,

  history,

  transaction,

  date)

  VALUES (seq.nextval,

  "CHANGE_HIS,"

  l_id_tbl (i),

  SYSDATE);

  exception

  while others then

  null;

  end;

  Start

  FoRALL i in 1.l_id_tbl. COUNTY

  DELETE FROM change_his

  where id = l_id_tbl (i);

  exception

  while others then

  null;

  end;

  end loop;

  so please give me a good solution to remove lines of less than 5 days...

  > exception when other then null;

  Seriously. You want to REMOVE the lines, even if they did not get inserted? You don't care to if they are deleted?

• Satellite A300-1ME - startup takes a lot of time

  Hello!

  I bought a Satellite A300-1ME a week ago and I had a few problems.
  When I arrived home, I picked up the phone and connected to the power adapter and the Vista installation. Then, with the loan of PC, I uninstalled Google Desktop and toolbar Google which for me are useless and is preinstalled.

  Then I rebooted and surprise: after the Windows Orb during the connection, it came to a wait... screen, and he stood here for an hour, so I did a hard reset and the same story, I can t reach the login screen.

  Started on mode without failure all well, done a restoration of the system, reboot and nothing the same problem. Started by using the recovery system in the laptop and tried to make another system of recovery here. He started and when it reached the end this game me an error because he says ' there is zero of the file to restore "or something else. I used the other recovery system which format and reinstall Windows. Once again, on the desktop, I rebooted and the same thing: wait...

  Went to the dealer the day of purchase, and they gave me another. Now, it seems to work well, but the boot time of the Windows Orb on the screen to login, it takes about 1 minute in the best of cases, also uninstalled McAfee Security Suite and nothing.

  So I would like to know if this is normal due to being a laptop, well as my other PC with 8 years and with Vista is faster when connecting (not not to use it). I think it may be because of all the drivers and all that which is preinstalled, but I fear to uninstall Google Desktop on it and my computer being useless new m.

  And put XP inside, what guarantees mean? Will I have lost if I install XP with all the drivers of Toshiba and the SATA driver that I found for this laptop?

  Thank you very much for reading.

  Hello!

  Are already in the forum discussion on this topic. You will find, if you are looking for a little bit.

  You can make Vista faster, if you defragment the HARD disk, remove the software that you don't need, configure the program sartup and disable services.
  Here is a good article on services in Vista:
  http://www.speedyvista.com/services.php

  I m sure the Satellite A300 is faster than your 8 years old PC. ;)

  If you want to install XP, it is no problem. You will not lost the warranty, because you do not modify the materials or disassemble the laptop.
  And Yes, you need SATA drivers. You can download it from the site Web of Toshiba (Intel Storage Manager). Copy the drivers on a floppy disk, or you build your installation disc on with nLite.

  Good bye

• Start of Satellite L300-1 has 3 takes a lot of time

  Dear Sirs

  I bought a laptop from 1 to 3 Satellite L300 there is little time and I noticed that it is too slow at startup. It takes sometimes more than any portable computer so that it starts.

  This model is like that, or it can be changed or may be downgraded to Windows XP?

  Hello!

  Here in the forum are already discussions on this problem so that you can search a little.

  There are many ways to make Windows and departure faster upward. For example of auto-start all the, you need to disable programs that you don t need, disable services, defragment your drive HARD and far.

  Of course, you can install Windows XP on your laptop. Pilots and others, that you will find on the download from Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• HP7310 all in one printer: take a LOT of time a print or copy

  I used the camera for several years without problem. Now, when printing or copying, it takes several minutes for a single page to print. Any suggestions on how to solve this?

  The printer made a tape from the printhead, then break for 5-15 seconds before the next swath?  This is probably caused by a cartridge failed.  Try the following: remove the color cartridge and send a print job to the printer.  (There will be a warning to error, but the print page).  If the page is printed at a normal speed the color cartridge was the issue and needs to be replaced.

  If the foregoing test still prints slowly and then remove the black print cartridge and reinstall the black cartridge, and then print a test page.  If not prints at almost normal speed, the problem was the black cartrdige and needs to be replaced.

• Satellite Pro A10: CD rip procedure takes for a long time.

  Toshiba Satellite Pro A10... Tried to rip a CD on my computer. Yesterday, the process was real quick as 10 minutes per cd. Today is a time frustrating per cd!

  Everyone thinks that the hard drive was missing? Or I'm just something incredibly stupid? Whatever it is, something is wrong!

  Ryan

  On this kind of issue, it is not possible to give you an answer. How should we know what you exactly, what processes are active in the background?
  Sorry, but you need to check only.

• When I copy the original document in Illustrator CS6 in Illustrator CC parts of the dough of document beyond their position. I have attached the images below. I have to go to each article and make a compound path that takes a lot of time. Help, please.

  

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• iOS 10 takes a lot of time synchronization and backup iPad to iTunes

  Has anyone noticed that it takes unusually long to synchronize and back up their iPad to iTunes after that 10 updated iOS?

  What used to take three minutes, it's now at least 15 minutes. My iTunes is up to date.

  Thanks for ideas or confirmations of this accident.

  iPad 9.7 Pro, 256 GB

  I noticed the same problem with my iPhone 6. Synchronization and backup with iTunes takes about twice as long. All software are up to date.