Satellite U300-151 - halftone color display

Everyone,

I bought a new Satellite U300-151 laptop w Vista 32 bit on board, installed the latest patches (display, bios, etc.) and at some point (unfortunately I can't say where it started) I came for a display problem.

Namely, color settings are 32 bits of depth and it seems that is not enough colors so it starts to prevaricate objects and their production nickname big pixels.

When I roll it back to 16-bit, the colors become smoother crapped but also because they are really different from the other screens I have.

People on this thread of the forum say that it can be connected with the BIOS. I have just flashed the 3.9 most recent so if someone at - there a solution to my problem or just more old BIOS it would be very appreciated.

Peter

Post edited by: ADMIN

Dear Petr

Satellite U300 laptop is new model with, I think, guarantee valid and the best thing to do is to contact the service provider authorized in your country. They exchange defective hardware component (poster or graphics card).

Please don't get me wrong, but I don't really see anything that you can do it alone.

One last thing: if possible please test with external monitor. If the problem persists, the graphics card must be defective and the motherboard should be replaced.

Tags: Toshiba

Similar Questions

  • Problem webcam with satellite U300 - 151 Skype running

    Please can someone help. I just bought a satellite U300 151 and have found that the web cam is not working. I use Skype for my video over ip and all I see is a black screen.

    Someone at - it ideas.

    I'm not a grumpy, so please keep the simple answers.

    Thank you very much.
    Jean

    If you use the Vista operating system then a SP1 should fix this annoying problem.

    I also found this Toshiba document:

    [Integrated Webcam may not respond after wake computer from sleep state: 077 http://askiris.toshiba.com/ToshibaSupportSite/search.do;jsessionid=A42AE5A8B59DBDA1AB02F3FB5A11F? cmd = displayKC & docType = kc & externalId = 1924621xml & sliceId = & dialogid = 41219194 & stateId = 0% 200% 05 20412176]

    Maybe it helps if yes, let me know

  • Satellite U300-151 plant of the standby or sleep mode extended when WIFI is turned on

    I have a new satellite U300-151. BIOS V3.80 and Intel version 11.5.0.32 wireless (which seems to be the latest driver). Vista SP1

    When return to work of the standby or hibernation mode laptop still crashes if the wireless switch is enabled.

    I am aware that it is an issue being discussed in a number of forums, but apart from references hopeful to SP1 and drivers, that I have not fallen on a solution. SP1 does not appear to have helped to solve my problem.

    All responses - thanks.

    My knowledge of the SP1 could makes some problems because not all drivers are compatible with the new Vista service package.

    The laptop goes down without installing SP1?

  • Satellite U300-151 - SD card slot does not

    I have the Toshiba Satellite U300-151 (PSU30E-074017AR) model that follows the
    SD card slot not working do not I have install windows XP SP 3, & is installed 100%, I need to fix this...

    Please chk this link:

    Hello!

    What do you mean with her does not work?
    The computer recognizes an SD card?
    The card reader is listed in Device Manager?

    As a first step, you must update the SD card driver. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite P30 Power Off & color display

    I have 2 intermittent problems that may indicate my laptop is endangered, but first of all, I just want to get organized? s advice on the situation.
    I have a Satellite P30 145 just over a year and I'm in the United States for six months and its HOT here. The laptop turn off a few times a month before my arrival in Florida a few weeks ago, but now with the much higher time (70 - 80F inside) it shuts down a lot during the day when the processor is going strong (like a Spy Sweeper scan) and I can really only use in the evening and at night now when it's cooler. I said that this is a motherboard problem now as its gone way past being a matter of dust/fan. The laptop is raised well above my lap tray so that the 2 fans are free to do their thing. Makes no difference.

    Secondly, just recently, I started having a blue tint to white areas on the screen and if it was, say, a picture, then color would suffer too. It comes and goes when I press on the area of the metal envelope just above the button "Pause" along the top of the keyboard. Again the Geeks in Best Buy today (American electronic store) said that he was bound to the motherboard.

    Given these 2 boring (at best) issues and the enormous cost of a motherboard, I guess I'm really a new laptop and the fact that he is only 13 or more months is shameful.

    Anyone who has ANY suggestions - apart from saying that I was a fool not to get an extended warranty?

    Hello

    I will not say that you are a fool because you don t have an extended warranty, but of course the longest warranty period is very useful, and AFAIK recording of the laptop on the Web from Toshiba site would increase the 24 month warranty. (standard warranty of 12 months + 12 month after registration)

    However, in my view the judgment downs problems are related to the high temperature inside the laptop. I think you should check the Toshiba power saver options. Here, you can change the cooling method and the speed of the CPU.

    Second, I put t know exactly why the blue hue appears on the screen, but a similar one occurs when I slightly press the surface of the LCD screen.
    I think that it s not a motherboard problem and perhaps only a small part of the Board of Directors must be replaced.

    I think that you should first try to contact the ASP in your country. Guys you could give more detail than everyone here in the forum. You know that we are all of the common laptop users and technicians.

  • Projector is not capable to connect with Satellite U300 - 151 Fn + F5 works not

    Hi all
    last Sunday, I tried to connect my laptop with projector Panasonic and pressed Fn + F5 keys, but of no use it was not showing anything on the projector...
    Please tell me precedure step by step to solve this problem.

    Thank you and best wishes in advance
    Alex

    Hello

    The walkthrough?
    The procedure is not difficult.

    -Connect the projector to laptop
    -Turn on the laptop
    -Use the FN + F5 key combination to switch to the external display (TV, projector, etc.)

    She's the one

  • Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

    I have problem with Vista - it became too slow so I want to get back to factory settings.

    I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

    I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

    And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

    Delivered using the recovery media, you will be able to install Vista.
    Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

    Bye and good luck!

  • Satellite M70-151 - how to upgrade the display driver?

    Hello

    as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

    I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
    After installation, I learned that he had to go on the manufacturer's site to get my drivers

    So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
    Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

    Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

    So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

    Thanks for your help

    / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

    ---------------
    Display devices
    ---------------
    Card name: ATI MOBILITY RADEON X 700 graphics card
    Manufacturer: ATI Technologies Inc.
    Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
    DAC type: DAC (400 MHz) internal
    The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
    Display memory: 256,0 MB
    Current mode: 1280 x 800 (32 bit) (60 Hz)
    Monitor: (Standardmonitor)
    Monitor Max RES:
    Driver name: ati2dvag.dll
    Driver version: 6.14.0010.6587 (English)
    The DDI Version: 9 (or higher)
    Driver attributes: Final retail
    The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
    Would be WHQL logo: Yes
    WHQL Date stamp: n/a
    VDD: Non applicable
    Mini VDD: ati2mtag.sys
    Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
    The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
    Vendor ID: 0 x 1002
    Device ID: 0 x 5653
    SubSys ID: 0xFF021179
    Revision ID: 0x0000
    Revision ID: 0x0000
    Video Accel: ModeMPEG2_C ModeMPEG2_D
    Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    Registry: OK
    DDraw status: enabled
    D3D status: enabled
    AGP status: enabled
    DDraw Test result: does not work
    D3D7 Test result: does not work
    D3D8 Test result: does not work
    D3d9 Test result: does not work

    Post edited by: Sarahbella

    Hi Sarahbella,

    You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

    Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

    Download the driver and run the setup.exe file.

    Check this box!

  • Strange halftone colors and shadows on the Satellite A100-250

    Hi all

    My Satellite A100-250 is now almost 1.5 years old. Recently, the screen goes funny; black text on white has shadows strange, degraded colors have streaks of primary color, some halftone colors seem to cross the screen.

    He disappeared once simply by closing the laptop and restart, but this no longer works.

    I updated the BIOS of 2.2, but it had no effect, unfortunately.
    Startup Toshiba logo seems well, the Intel logo at the bottom right is however not...

    Is this the beginning of the end of my screen, I need costly repairs or can I try something of my own?

    Thanks for your help.

    Great information. Thanks for that!

  • Slow startup of Vista on Satellite U300 14 K

    I recently bought this Satellite U300, but it takes about 3 1/2 minutes by pressing the button, until I see the desktop and the sidebar Windows. I already turned off non-essential processes in Windows Defender and msconfig.exe, tried to have the radio Bluetooth and Windows Sidebar disabled, and it has not changed anything. Just on the black screen that shows up just before the office, for at least two minutes.

    Anyone other suggestions to speed up at startup tings? I have to re - install Windows Vista from the Toshiba DVD?

    Thank you

    Tine

    I think I knew in fact that is the problem, but I don't have the knowledge to fix it myself if it's here:

    When you start the "Toshiba" and "Welcome" is displayed as it should. But after that, the computer lies on a black screen for about two minutes. Recently, I tried to open the task manager at this point and it was no problem. If I could terminate explorer.exe and run it again, and as if by magic my office appears instantly! So I guess that the explorer.exe process gets delayed just somehow?

    I hope someone knows how to solve this problem, your comments are welcome!

    Thank you

  • Satellite U300 - white screen after reboot

    I have a 3 yo Satellite U300 (with Vista), which was usually in good working order until this morning. It froze a little bit when I had iTunes open so I restarted. He now has a completely blank screen.

    I tried to stop and restart several times, I tried to plug it into an external monitor and have tried to remove the battery and drain the power I had read recommended on another forum.

    It also seems to be from running as it should (turns on, fan is on, etc) but I can't get anything on the screen.

    Any ideas?

    Hey,.

    If you can t get an image on the external display, it appears to be a malfunction of the motherboard, CPU, RAM or anything, but the internal screen should be ok

    Hmm. In your case, I had read this article, maybe it helps:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=21

    In the worst cases, you need professional help of an authorized service provider. Guys can check your laptop and repair because they have access to the databases of Toshiba and order new parts.

    Good luck! :)

  • Satellite U300: problem external screen

    Hello

    I just bought a U300 laptop, which is really nice. But I tried to plug in an external display on this subject and the result is really bad, and I don't understand why.

    My external screen is an E1900WS (19 ", widescreen, resolution: 1440 x 900 at 75 Hz).
    When I plugged it in, I asked to extend my desktop.
    My laptop screen is fine, but external has a problem: the screen moves to the resolution of 1440 x 900 at 75 Hz, but there are a few ripples on it.

    Like her, the image is not perfect. I tried to change my external display driver, but it's the same result.
    My OS is Windows Vista Home Premium (I don't like, so slow...).

    Do you think that 1440 x 900 is a too big resolution?
    Do I have to update my driver Intel X 3100?
    You have another idea?

    I'm sorry if my English is so bad, I'm french.
    Thank you.

    Post edited by: bertrand.lg

    > Do you think 1440 x 900 is a too big resolution?
    The resolution is not the problem, but you can try to change it and check if the same question is displayed using different screen resolutions.

    > Should I update my Intel X 3100 driver?
    Intel x 3100 is unclear for me so I think that you need to update.
    To my knowledge, some satellite U300 were equipped with Intel 965GM GPU.
    So if you want, you can use the latest driver from Intel page!

    > Do you have another idea?
    Unfortunately not! …Apart from upgrading the Intel reader.

  • Is there an adapter PCMCIAHDMI to use HDDVD on Satellite U300 - 10M

    I wonder if there is a pcmcia - port hdmi card? Alternatively, display video HQ on external device? VGA port is not appropriate I think.

    Hey Buddy

    Hmm. don't think that this is possible because the standard high definition needs a special interface to transmit the huge amount of data.
    To my knowledge, the Satellite U300 supports an expansion slot of express card that can accommodate two standard module formats;
    -Express Card/34 module
    -Express Card/54 module

    An Express card module is a small snap card based on USB and PCI Express interface.
    I goggled a bit, but unfortunately, as I have already said I didn t find these special options.

    Best regards

  • Satellite U300 - 13 M - port external monitor (VGA port) does not work

    Dear users of Forums from Toshiba,

    I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

    Please help me.

    Best regards, Elbrus

    Hello

    I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
    Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

    Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
    The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

    You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

    Check it out please and post the results.

  • Satellite U300 - graphic driver Windows Xp problem

    I bought Satellite u300 with Windows Vista, then I kill vista and install XP.
    Everything is good video work - but only with the problem

    OpenGl - trolling
    All videos - late

    Help me!

    I downloaded the drivers from Toshiba site of the 20/02/08 Display Driver Intel Windows XP 6.14.10.4831 World Wide.
    Then to install it. After installation I have the same problems.

    After that I have an appointment on the Intel site and download the latest graphic drivers for 965Chipset express
    But when I m trying to install it I see - this leads isn t tested for this PC.

    Pls download required drivers from the Distributor. Installation will stop.
    HELP ME GUYS - I NEED THE NORMA GRAPHICS DRIVERS

    Hello

    try this one... maybe this will help

    http://support.toshiba-tro.de/Tedd-files2/0/work/display-20080908151151.zip

    V6.14.10. * 4953 *.

Maybe you are looking for

  • Cedric_L: is it possible to open several yahoo email accounts?

    Cookieswap addon does not have multiple yahoo mail login for different users. Operating system Windows xp

  • With my PIXMA ip8720, can I print multiple images on a sheet of 8.5 x 11?

    I want to print my logo several times on a sheet of these size stickers white tithe sold my office supplies store. There must be 50 + of these stickers by a sheet of 8.5 x 11. Just like printing of address labels. Can I do this on my PIXMA iP8720 som

  • Cannot install Directx 9.0

    How to enable the cryptographic services in xp In my computer of DirectX 9.0 is not install an error is coming that a .cab file is needed for installation is not reliable. Please check the cryptographic services are able and the certificate file is v

  • Download driver driver page for HP LaserJet Pro M201n hp support does not

    Met the error after downloading printer driver for HP LaserJet Pro M201n for Windows 7 on the official support of the HP page: the requested URL /pub/softlib/software12/COL55789/bi-134296-2/LJ_Pro_M201-M202_Full_Solution_14101-a.exe was not found on

  • Serial com port USB displays error code 10

    When I did a check up on my computer (Windows 7 OS) this morning he said my serial port USB COM 3 would not start and had a code 10.  I went to the Device Manager and checked, and it says the same thing.  I clicked on update of drivers and it said th