Satellite U300 cargo stops when wake up from sleep mode

Similar Questions

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• New installation of 8.1 on Y510p guard pro wake up from sleep mode

  Any ideas on why a fresh install of windows 8.1 vanilla pro would keep wake up from sleep mode? What spectator even can I look at to understand this?

  It seems that turning off sleep timers solved my problems. I also disabled standby (but not sleep) when it is plugged in and the laptop stay asleep until he does it's nighty WHS backups and then fall back to sleep now.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Computer Windows XP doesn't wake up from sleep mode.

  Original title: standby mode does not wakeup.

  Windows XP PC collapsed to wake up from sleep mode.

  Hello

  Glad to know that you have solved the problem.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• Connect button on Windows 7 that SOMETIMES appears to wake up from Sleep Mode, sometimes goes right on the desktop

  Hello.  Suddenly, from this morning or perhaps yesterday (April 15), when I click my mouse to wake up my new Windows 7 Inspiron PC from Sleep Mode, a Windows login, button began to appear is no longer for me to need to click.  Only a few minutes ago, when I woke up my PC by clicking my mouse, the button HAS appeared!  Does the show button only SOMETIMES, as every time the PC is asleep (hibernation?) for a SHORT time or long?  I'm puzzled about why this behavior started all of a sudden. Initially, he always showed the button - but maybe it's because as a first step, maybe I had waited long before going to my PC to wake him, don't know.  This new variable behavior could be linked to the 12 April Security Update for Microsoft .NET Framework which perhaps has not taken effect until a subsequent Restart, that maybe, I did last night or this morning?

  Thanks for the ideas.

  Alyse

  Hi Evelyn,

  This problem is perhaps due to the power settings on your computer. Ensure that requires a password on the alarm clock is set. See the following steps.

  1. Click Start, and then click the power Option.
  2. Choose several power supply options. In the Power Options window.
  3. Click on request a password for reactivation.
  4. Save changes and check.

  If the problem persists, run the power Troubleshooter and check. Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• Satellite U300 falls down and cannot wake up from sleep mode

  Hello

  I got a Satellite U300 a few days and I get in trouble, when the laptop goes into sleep mode.
  The thing is that when he goes to sleep, the screen turns off but the light stays on (blue), instead of flashing with an orange color.

  It is not possible to wake the portable computer, and the only solution is to restart the computer.

  I tried the different possibilities to enter sleep mode, and I get the problem mainly when the computer is in high-performance Vista and when you press the stop button in the quick menu.

  I know Vista gives a certain a lot of problems, but I didn't know anyone here who face the same problem.
  Should I send the laptop back to technical support?

  Thanks in advance,

  I had the opportunity to work a little with several laptops from Toshiba, and one of them was Satellite U300. After a brief check of the basic functions for laptop I can say with certainty that switch between mode and standby/hibernation mode work well and I didn't notice any problems.

  I really don't understand what is wrong with that, but please do:
  -If you want to switch to standby mode, choose option using the button START.
  -Wait a bit and I hope after a few seconds, the laptop will change automatically in standby mode (blinking amber LED)
  -Close the cover
  -Wait a moment opened the lid and press the power button
  I really hope that your laptop will start correctly and you will be able to use the OS again.

  Good bye

• Satellite U300: Vista restarts / crashes on waking from sleep

  My old days Toshiba Satellite U300 is sometimes (but not always) crashing on being awakened from his sleep.
  It starts to wake up normally, but before the Office has reappeared, it just restarts and Vista tries to recover from a "abnormal termination.
  I'm updating Vista drivers & as far as I know.

  I'm getting conflicting opinions on whether this is a hardware fault laptop or any simply "sleep Vista does not work properly, then don't use it yet.
  If anyone has had this experience or have any patches?

  Am pretty ordinary running Norton Internet Security 2008 and some other programs, if that helps.

  Hello

  I tested it with the Satellite U300-112 and there is no problem at all. I have to say that my little U300-112 is clean preinstalled with recovery image.

  To be honest, I think that it comes to Vista because all the power settings are controlled by Vista. Have you noticed the same thing after the hibernation mode?

• Satellite U300-151 plant of the standby or sleep mode extended when WIFI is turned on

  I have a new satellite U300-151. BIOS V3.80 and Intel version 11.5.0.32 wireless (which seems to be the latest driver). Vista SP1

  When return to work of the standby or hibernation mode laptop still crashes if the wireless switch is enabled.

  I am aware that it is an issue being discussed in a number of forums, but apart from references hopeful to SP1 and drivers, that I have not fallen on a solution. SP1 does not appear to have helped to solve my problem.

  All responses - thanks.

  My knowledge of the SP1 could makes some problems because not all drivers are compatible with the new Vista service package.

  The laptop goes down without installing SP1?

• Wake up from sleep mode, monitors turn on but no image is displayed. HP ENVY Phoenix h9

  Product: HP ENVY Phoenix h9 PC Series

  Product #: H3Y51AA #BL

  Model: h9-1387

  OS: 8 64-bit Windows

  Monitors: DELL 2407WFPHC x 2

  Updated graphics drivers to the latest version non-beta.

  Hello

  Since buying my PC a few months ago, it has been one of the ' display' problems after another. This is the current problem:

  When executing step by step away from my computer, I block via Win + L and shortly after that my monitor turns off. When you return a few moments later, I try to wake up to the top (but not really "wake up"...) To try to solve the problems of previous display, I already disabled hibernation options and sleep) my computer by moving my mouse. This causes monitors leave standby mode and be able to raise but what is dispalyed is black screens when I should have been introduced to the login screen.

  Mouse clicks and keyboard do nothing and I'm stuck at black screens. To continue, I press the power button on my PC causing the hard drives to spin-up and shortly after the computer turns off. I press the power button and start the computer to the login screen where as soon as I get my password, Windows loads and all my programs etc appear like they were before I blocked my PC.

  You can see previous problems, I had the list below, if all goes well they will help you to detect the cause of the current problem.

  Help, please.

  Thank you!

  Peter

  Previous problems I had:

  (1) when the awakening from hibernation, the computer would not wake up screensavers leaving no way for you to connect and save your work. Hard reboot needed. Solution: Disable hibernation Windows features.

  (2) error in the sense of "driver has no display and recovered." Possible solution: disabled hardware acceleration in Firefox.

  (3) when waking from sleep, I find that my 2 monitors have merged into one and a different resolution than usual. Once entered password to connect, programs that were on separate monitors are now on the same monitor. Right click on the desktop and selecting 'Screen Resolution'-> 'Detect' would set monitors to return to normal until the problem recurs. Possible solution: updated graphics driver. Don't know if this problem has been corrected, it may have just been concealed by the new problem mentioned above.

  Thanks, but the steps above had no effect.

  However, during a windows update, my graphics card driver has been restored and that seems to have stopped the problem.

  Unfortunately, again I see apps that were on two screens before lock/standby, appearing on the screen even after release sleep/wake. So far he did not often so we'll see.

• Satellite Pro L650 doesn't get often from sleep mode

  Hi, I have a Satellite Pro L650, model No.: PSK1KA-00Y01E running Windows 7 64 bit.
  This laptop does not pick up often after mode "Eve".

  Can anyone offer suggestions on how to fix this?

  What's happening:
  When the computer sleeps, either by pressing the sleep button, or by closing the lid, this seems to work very well.
  After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.

  Most of the time the lights white led at the front displays for a few seconds and then started. Then, press us the power button and, often, the computer starts and says that Windows has been shut down incorrectly and then completely restarts for a new session.

  Sometimes the computer does not start, and it must cut off the power, then press the power button, which then crosses a full restart of the computer for a new session.

  A few weeks ago, we installed the latest version of the bios (2.20), and the problem persists.
  Is it a driver problem or a hardware problem?
  If it is a driver problem, what drivers should I try to install?

  Thank you
  Graham

  Hello

  > After a minute or 2, I try to get the computer goes through the lid opening, or by pressing the power button. Sometimes, it works correctly.
  This means that this problem is not always, but sometimes only and it of not possible to replicate this.
  In this case is not easy to find a good solution for this

  > We have installed the latest version of the bios (2.20) a few weeks ago, and the problem persists.
  > Is it a driver problem or a hardware problem?
  In my opinion, it could be a software problem. I mean that the problem could be related to corrupt the OS Win. Maybe the registry is confused upward. Usually, if the laptop is in hibernation / sleep mode, by pressing power button should the reactivation of the system in this mode and not shut down the laptop.
  So maybe this is s question OS

  If I understand your message, you have just updated the BIOS but didn't try the recovery procedure. Well well, for checking if the problem hardware or software s, you should get the phone to the factory settings.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?