Satellite U400-138 - cannot install XP display drivers

Similar Questions

• Satellite P100-429 - cannot install the display drivers for Win XP SP3

  Hello

  I have Toshiba p100 429 portable, installed with win xp professional sp3. I am unable to change the screen resolution of 640 by 480.

  In fact, I tried to download the toshiba site display driver but after installing the driver, it gives a blue screen with error error NV4_mini.sys.

  After that I can't yet run my laptop.
  I currently use the external monitor (master B2230 synchronization). I also tried to download the drivers from the Nvidia site, but that does not work either.
  Low resolution on my screen. Thanks for your help

  Have you tried to install THIS driver?

• Satellite A300D-17Z - cannot install the display driver for Vista

  Hello

  There is a big problem with my A300D-17Z.

  The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

  Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

  Hello!

  Have you tried to install the driver to display on the Toshiba site? You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

  You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

  Good bye

• Satellite L555-S7008 - cannot install the display driver Windows 7

  Hi guys

  I'm confused now
  I have a Satellite L555-S7008, I installed a Windows 7 ultimate edition, but unfortunately the display driver did not work. Now I have pain in my eys because of the resolution. What should I do to make it work?

  Hardware found "Mobile Intel (r) 4 Series Express Chipset Family", but it does not support this type of material

  (2) what driver should I I installed to the PCI network communication controller?

  Hi ROCO_1,

  I had a similar problem with the display driver I t could not install it. I put t know why it happened, but the solution is that you need to install the display driver through the Device Manager and not from the configuration file

  So go into Device Manager and right-click on the graphics card and select put to update driver. Do not choose the Advanced installation where you can choose the driver directory yourself. Select the files that you have unpacked the file downloaded and that s all.

  About the communication network PCI controller, it could be both: WLAN or LAN card. So, make sure that the two drivers are installed.

• Satellite A100-590 - cannot install the display driver for Win7

  I installed Win7 on my Satellite A100-590 (PSAA9E-03Z00QGR) today. Everything works fine except for the display drivers.
  I downloaded the drivers win7/32 bit here: [here | http://at.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=AT&BV_UseBVCook = Yes & PRODUCT_ID = 115970 ie] but when I try to install, extract the files and then nothing happens.

  Does anyone else have this problem or even better a solution? all other drivers will work on this laptop?

  Edit: the graphics card is an ATI Mobility Radeon X 1600

  Extract the files in a new folder created. Open it and use setup.exe.
  What happens when you start it manually using setup.exe?

  Alternatively, you can try to start the installation in the Bin folder.

• Satellite A100 (PSAA9E) - Cannot install the display driver for Windows 7

  I have a problem with installing official Toshiba Windows 7 x 32 ATI x 1600 driver.

  After unpacking it should run install.exe, I think, but it's not; nothing happens. Go on the Setup.exe with installation manual, then I see no Catalyst Control Center & Display Driver from the list, just the catalyst install Manager & vcredist. After installing these components (CCC & DD) are not present.

  Any ideas?

  P.S. Same problem with the official driver of Toshiba Vista32 ATI x 1600.

  Hi mate,

  You have already installed other drivers for the laptop? I mean the chipset driver, this driver must be installed first.
  And are you sure that you have ATI display driver? Some Satellite A100 models were shipped with the nVidia graphics card, AFAIK.

  Moreover, what happens if you install driver manual in device via advanced installation manager?

• Satellite L45-S742 - cannot install the RAID drivers

  I tried to install a copy of Windows XP on a Satellite L45-S7423 but, whenever I try to install it I get this message:

  [http://209.167.114.38/support/techsupport/tsbs/all/-TSB001272/sata%20pic%201.bmp]

  Now, I tried following the instructions on this Web page

  [http://209.167.114.38/support/techsupport/tsbs/all/-TSB001272.htm]

  But, I always find myself with the same message every time. What can I do to get XP installed?

  Satellite L45-S742 supports RAID functionality?
  I doubt!

  L40/L45 are equipped with a SATA HDD controller and you don't need RAID driver but driver SATA!

  Check here some discussions about the Intel storage Manger and drivers SATA!

  See you soon

• Need drivers for Satellite U400-138

  Hello

  I bought a laptop model Satellite U400-138
  I n t have drivers for this laptop for Win XP and Win Vista
  I hope you give me a URL for that I have download the drivers

  I need them, please help me

  Hello

  You can find the drivers on the European driver Toshiba page.
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Your laptop belongs to the series of PSU44E and all drivers are available.

  PS: DON T ASK, BUT THE SEARCH IN THIS FORUM TO FIND ANSWERS. THESE QUESTIONS HAVE BEEN ANSWERED 100000 TIMES!

• Satellite U400-138: VPN Service cannot be installed on WiFi.

  Hello

  I have Toshiba Satellite U400-138 with Intel WiFi Link 5100.

  Some companies - such as Cisco and Citrix - use * deterministic Network Enhancer *: a service that allows other services (like VPN) use the computer hardware. And my company uses the Cisco VPN client.

  It is not possible to use the Cisco VPN Client by wireless with my Toshiba Satellite U400-138. The reason is * deterministic Network Enhancer * (DNE). DNE is installed with my card Ethernet Marvell Yukon (no problem), but Intel WiFi Link 5100 does not allow installing DNE. If you open "Network connections", if you look at the 'properties' of each connection after installation of the Cisco VPN client deterministic network (DNE) is only associated with Marvell Yukon. But I can't use VPN on my WiFi.

  I found a solution for Lenovo: [http://www.wfu.edu/~yipcw/lenovo/t400/intel-5100-vpn/ | http://www.wfu.edu/~yipcw/lenovo/t400/intel-5100-vpn/] but unfortunately it back do not work with Toshiba (see images on this Web page!). I think it is * Intel * problem but maybe Toshiba can find a solution?

  I think that this problem DNE may be an issue for other customers of Toshiba as Cisco and Citrix them frequently use in their products. For example, my company have invested to Cisco VPN.

  Kind regards

  Jacek.

  Hello

  If have a U400 and I installed the CiscoAnyconenct.
  It s a VPN connection and it works properly!

  I have an Intel WLan 4965AGN card. But usually it s any WLan card is
  The VPN should work with any connection.

  But using VPN you can get access to some networks in your company, but in my case that other links do not work while the VPN connection is established.

• Satellite L300 - cannot install the display driver and chipset

  I downloaded the site Web of Toshiba XP drivers.

  Now I'm getting errors when I try to install. Display drivers and Intel chipset gives me the error:
  "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

  What can I do?

  Hello!

  Are you sure that you downloaded the correct drivers?
  For Satellite L300 are different numbers of models available to check if you have chosen the right way.

  You can also install the drivers manually. Go to Device Manager > right click on the graphics card (or other device) > Update driver

  Good bye

• Re: Satellite U400-138 don't go in mode sleep in Windows XP Home edition

  Help me...

  I just down-grade from Vista to XP. I have already installed the Windows XP SP3 home edition and solved the problems of sound card. I have already downloaded and installed all the drivers to support eu.thosiba...
  But still, I have a problem with the standby / suspend mode...
  My Satellite U400 - 138 (PSU44E) cannot go into stand-by mode. Everytime that I click on the stand by, the screen will "preparation of standby" then turns off, but there are things still on the hard drive and power led indicator I know that it is not in the standby mode, it is still white lamp, not a flashing red...
  To Hibernate there is no problem at all...

  Please help me...

  Thank you and best regards...
  ADI

  Hello

  I have a U400 also, but the PSU40E and installed Win XP SP3.
  I can use Hibernate mode and standby without big problems.

  Just a question; You update the BIOS?
  I did and installed the latest version of the BIOS from the page of the European driver Toshiba before I ve installed Win XP.

  In addition, I would like to know if you use the Toshiba Power saver.
  Toshiba Power saver was chosen in my power options Windows and I can go to sleep mode by pressing FN + F3.

  See you soon

• Wheel of Satellite U400 - 138 Volume - software problem

  Hello!

  Recently * Toshiba Tempro * suggested I upgrade the bios driver sound (Conexant) and a few other drivers for my Vista. I did and then I noticed that the volume of 'material' control - * volume wheel *-did not work. Still, I have the right volume level control by clicking on the 'volume' icon, but turning the steering wheel left to right and does not affect the volume level. I tried all the options in the Control Panel, but there is simply * no. OPTION for a wheel *.

  I thought it broke. BUT: there was a miracle - if the * registry editor * (regedt32.exe) open the wheel _works_ perectly! But if I close it (or even if I click on another window or minimize regedt32) everything is bad - volume stops at the last level, "recalled" my Vista (I have tested hearing music in the background).

  That's why I think that:
  1. the wheel is working and sending its changes but Vista (or a pilot of its new) does not recognize
  2. when the Registry Editor opens these changes are "up-to-date" - so the wheel seems to work. But when the registry editor is not active there is no mechanism for this "update".

  All solutions? You know the keys on which registry changes when I turn the volume knob? That I should

  Concerning
  Jacek.

  PS:
  I have the latest drivers for my Satellite U400-138 today (28 January 2009)

  Hello

  I think that you need to reinstall just the PPV again.
  The value contains some applications that control Toshiba media, keys FN and also the Volume indicator buttons.

  First, you must remove the old system VAP.
  Then clean the registry using a tool like CCleaner, for example.

  Then after restarting new install the VAP and reboot the laptop.

  Welcome them

• Satellite U400-138: how to activate Bluetooth in Ubuntu device

  I have a new Toshiba Satellite U400-138.
  This is the version of Centrino with Intel GMA4500HD graphics card and Intel 5100 a/g/n wireless.

  If I understand correctly, the Bluetooth adapter is * turned off by default * and a special * command ACPI * is required to activate it. I use the linux 2.6.27rc8 kernel and it has two drivers - * toshiba and toshiba_acpi *. These cannot be inserted into the 'No Such Device' kernel.

  The reason is probably that these drivers only work with the Toshiba BIOS. This model has a Phoenix BIOS.

  So, how can I activate the Bluetooth market adapter and stop on this model?

  Hey Buddy

  Unfortunately, Linux is not supported before you wait days here I recommend you to enjoy some Ubuntu forum and ask I think that, in the meantime, we solve problems WLAN but BT. It can be further complicated theme.

  Good luck and post your new activity. It may be interesting for other fans of Linux.

• Satellite U400-138: RAM works with 667 Mhz instead of 800 MHz

  Hello

  I have Satellite U400-138 with 3 GB of RAM (2 + 1 GB sodimm modules)
  I have new kit 2x2gb sodimm-s Corsair PC6400(800MHz)

  When I install new modules, system reported that they are working on 667 Mhz instead of 800 MHz,
  Maybe that's the problem BIOS chipset because that support this frequency.

  Help me, what to do, to run new modules on 800 MHz?

  Hey Buddy

  I doubt that it is a BIOS problem.
  The point is that the speed of the RAM can be lowered and locked by the FSB (front side bus)
  If the FSB supports only 667 Mhz then your RAM 800 Mhz will run only at 667 Mhz

• Question about upgrading RAM on Satellite U400-138

  Hello

  My laptop model is Satellite U400-138, part number: PSU44E-00500JG3

  Technology:
  type: technology Intel Centrino 2 processor on processor Intel Core 2 Duo P8400, Intel GM45 Express chipset and Intel WiFi Link 5100
  Clock speed: 2.26 GHz
  Front Side Bus: 1066 MHz
  level 2: 3 MB cache

  Operating system:
  Genuine Windows Vista Edition Home Premium (pre-installed, Toshiba-HDD recovery)

  System memory:
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MB
  technology: DDR2 RAM (800 MHz)

  In intel webside one writes the following on my motherboard laptop specifications:

  "1.2 Intel GM45 Express Chipset supported feature
  All features supported by the Intel PM45 Express Chipset supported by Intel GM45
  Express Chipset unless otherwise stated below. Additional features are listed below. "

  1.2.2 memory system «»
  -Support to 667 MHz DDR3 then FSB 667 MHz isn't that. "

  "1.1 Intel PM45 Express Chipset supported feature
  1.1.2 storage system
  -Support for DDR2 and DDR3 SDRAM
  -Support for DDR2 667 MHz and 800 MHz
  -667, 800, and 1066 MHz DDR3 support
  -One SO-DIMM connector (or memory) per channel
  -Channel memory supported two Configurations
  -Double-channel symmetrical (with Interleaved access)
  -Dual-channel asymmetrical (with or without Intel Flex memory technology)
  -Support for 8 GB of maximum memory
  -scale 64 - bit per channel
  -Technologies of 256 MB, 512 MB, 1 GB and 2 GB memory supported
  -Support for DDR2 and DDR3, x 8 and x 16 devices
  -Support for DDR2/DDR3 termination on chip (ODT)
  -Supported partial written memory using data signals mask (DM)
  -No support for chip quick selection mode
  -No support for ECC
  -No support for operation 1N. "

  http://www.Intel.com/assets/PDF/datasheet/320122.PDF

  The question is...

  I want to upgrade my portable computer system memory 3 GB DDR2 (800 MHz) RAM to 4 GB of RAM DDR3 (1066 MHz), which is compatible or not?

  Respect,
  enteoana

  Hello

  In my opinion, you should follow specification not Intel and Toshiba. S Toshiba of info is based on own tests and facts.
  So, depending on the specifications of Toshiba for the GM45 Chipset it is clearly written:

  Min(on Board) wheel capacity - DDR2 800 MHz 0 MB / 8 GB max
  Type of extension of memory - DDR2 800 MHz 1 GB/2 GB/4 GB
  Type of module - SO-DIMM

  So if Toshiba write about 800 MHz modules, you must use the modules to them and not faster.
  You may be able to use faster too, but they do not work with the maximum speed, but not going down to 800 MHz.

  If you want to use max RAM amount use recommended and tested 2 x 2 Go DDR2-800 (PA3669U-1M2G).
  Indicated as compatible RAM, 4 GB DDR2-800 (PA3670U-1M4G).