Satellite U840-111 - not used SSD

Similar Questions

• Can satellite A210-1AO - I use SSD drive?

  Can I replace the original HDD with ssd HARD drive? And where can I found the DSS Satellite A210-1AO drive compatibility list?

  I doubt you can find a list of the SSD compatible discs for Satellite A210 since the Satellite A210 where not tested and not equipped with these drives
  But as far as I know, there is not much difference between the use of the common SATA HDD or SSD SATA drive.

  As mentioned, the laptop supports the SATA controller and you can use an SSD designed for SATA controllers
  Usually this SSD drive should be ok.

  Welcome them

• Satellite U840 - battery not detected but is able to load

  I'm on a Toshiba satellite u840, now that its battery is not able to detect, but it can be loaded and also after a while amount after charging, it can be used without the main cable. But the main problem is that my laptop is unable to detect the battery, I don't see how much battery power is :/

  Need help please, I don't really know what to do

  > But the main problem is that my laptop is unable to detect the battery, I don't see how much battery power is

  You mean the icon does not appear in the taskbar or what exactly do you mean by + I don't see how much battery power is +?

  What Windows system do you use?

  If you are using Win 8 try run and use the command: sfc/scannow
  Here is the description: http://support.microsoft.com/kb/929833

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

• Satellite U840-111 - Boot USB option not seen unless

  With the help of the Ultrabook I have prepared an "emergency" Ubuntu USB boot image (LinuxLive used to transfer a .iso downloaded to a USB device) on an SD card in a USB - SD adapter (the map is to a USB port, not the SD slot).

  It worked well.

  But when I restart the Ultrabook using F12 to see the Start Menu there is no text next to the USB option in the start menu (and if I select the boot option I see Windows start as usual).

  If I select the option in the Bios on the F12 boot menu to go to the Boot menu in the BIOS I still don't see any text on the USB line.

  If now, I re - feed and use F12 I now see "Mass Storage Device" (or something equivalent, can't remember) on the port USB line and the machine now boot Ubuntu on it (and I can see the file system on the hard drive).

  As far as I know, you need to enter the BIOS Setup, but do nothing) before using the F12 boot menu if you want to start on a USB (well this one at least).

  This seems to be a bug in the BIOS? BIOS version is 1.4

  Not quite sure if it s a bug or not.

  To my knowledge, the USB boot option to flinch F12 menu until a USB compatible and put up-to-date device should be plugged.
  This means that you must connect a bootable USB device to the laptop and then power the device and press F12 to get the menu.

  I also read that all the devices can be fully compatible so it would be really interesting to know if the same question is displayed using a bootable USB flash memory key you've tried a combination of USB SD adapter I could be possible that it is the problem here.

• Satellite U840 does not illuminate

  Hello

  Yesterday I went to turn on my Satellite U-840 ultrabook and nothing happened when I pressed the power button. I left the laptop plugged in and with an external hard drive connected (and turned on) I had several times previously.

  The LED lights up when the laptop is connected to the power supply and shuts off when it is not.

  On the audit of this problem on google, most of the advice said to unplug the laptop, remove the battery and hold the power for 30 seconds or more, then replace the battery and power and it should work.

  However, with this ultrabook, it is not possible to remove the battery.

  Is there an alternative solution for this?

  Hello

  Unfortunately this mentioned workaround does not work always and only if the laptop's hardware is not affected.
  As an alternative, disconnect the power adapter and leave the laptop disconnected for a longer period of time, but I guess that's not very useful

  I think the warranty to be valid, so in this case, you don't have to wait for some auto magic cure, but you should contact the technical service to check the hardware.

• Satellite A100 - can not use Wifi after installing Win 7

  Hello

  I have a laptop Toshiba A100 of broadcasting.
  After 4 years of use, he was once hit by attack of virus and after detection, I got my laptop to format.
  and now, Windows 7 Home Premium has been installed (originally my OS is Windows Vista).
  Now I'm not able to use Wi - Fi.

  Please suggest me the procedure I need to follow in order to access wireless networks.

  My machine configurations are:
  1 GB of RAM
  HDD of 80 GB + 500 GB external support
  WINDOWS 7 Edition Home Premium
  1.6 GHz FREQ.

  Hello

  Have you installed the driver Wlan?
  The wireless network adapter is visible in device-> network cards Manager?
  Check it!

  In addition it s interesting to know if you are able to activate the WLan using FN + F8?
  If you will not be able to do so, you must install VAP (value added package) and Flash memory card Support utility.
  Check these two tools that have been published in Satellite L500 driver download area

• Satellite U840-111 - light electric shock

  It has just delivered 14 "Ultrabook me give mi shock (they feel more like a vibration when you brush just against the metal part and sides of the touchpad).

  This occurs only when the power supply is plugged in and both if the machine is running or not.

  This suggests a power supply leaking to me, I see there are scattered reports of what is happening in Toshiba and other laptop computers. Just thought I would write it down for reference.

  Also I would like to know which is the best contact for a replacement PSU, Currys hassle who sold it or Toshiba themselves. Any suggestions based on experience?

  Thank you

  PS: The power supply model number is PA3822U-1ACA, 19V

• Satellite U840 - sound indicator is not visible using F9 and F10

  Hallo!

  I recently bought a toshiba Satellite U840-10 q ultrabook with Windows 7 installed.
  I was wondering if it is possible to be able to see the level of noise while I'm evolution through the keys on the keyboard (F9 and F10 to lower or increase respectively).

  The volume level changes indeed, but I don't see what level he is at any time while I play the volume change.

  Only if I check the speaker icon in the right side of the taskbar.
  I searched a lot how I can do but I have not found anything.

  Thanks in advance!

  Vaso

  > I was wondering if it is possible to be able to see the level of noise while I'm evolution through the keys on the keyboard (F9 and F10 to lower or increase respectively).

  I tested it on my laptop, and it is not visible!
  This function does not seem to be active or available by keys F9 - F10

• Satellite U840-10N - Windows Installation can not see any drive

  Hi all, this is my first post so I hope that I chose the right place to post in.

  I just bought a new Toshiba Satellite u840-10n ultrabook. He joined WIndows 7 Home Premium 320 GB HHD + SSD of 32 GB.

  Even though I prefer Linux, I need Windows because of Microsoft Visual Studio. I downloaded Visual Studio (legally throught dreamspark.com), but it looks like it has some issues. In particular, I can't create any project.

  After searching the Web for this problem, I decided to try reinstalling Windows, hoping that this will solve the problem, and here's the point.

  Installation process of Windows 7 can not find any drive. I looked through the web a lot to solve this problem, even, without understanding.

  I read a lot of other people had the same problem. I tried different ways and I'm about to throw the laptop out the window.

  Is there anyone can help me?

  See you soon,.

  Marco Galassi

  You need to load the SATA driver before you start the installation of the OS. Try it please use the files from http://www.fileswap.com/dl/igfH0jVrap/

  I used it on my Win8 preinstalled satellite to install Win7 64 bit. Copy it to USB and install from there.
  Please post comments.

• Does not begin with satellite U840-110 - Windows 7 - loop start-up

  Hello

  I have been using a Satellite U840 - 110 portable since dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left in standby for a few days. When I tried to start the computer, it froze at the start. So I forced reboot by pressing the power button. After repeating this for a couple of times, he first showed a blue screen. Then, when the computer has been restarted, he showed a black screen with the following message

  "Windows error recovery".
  Windows could not start. A recent hardware or software change might be the cause.
  ...
  ...
  Run the Startup Repair tool or
  Start windows normally'

  I have tried both these options multiple times and every time at the end of the process, he might come back to these same screen. I also tried to press F8 and used advanced and tried Boot Options "not last know good configuration."

  None of this seems to work and I was not able to load Windows. I don't have a backup of my data and can end up losing a lot of vital information.

  Is there anyway I can solve the problem and get the computer to work again?

  Is it possible to recover data from the hard drive.

  Thanks in advance for the help!

  Is it possible to recover data from the hard drive.

  You can remove the laptop HARD drive and could connect to another computer using USB-to-SATA cart.

  After that, you could insert the HARD disk into the laptop new and could try to perform the Toshiba HDD recovery.
  (F8 - fix my computer - Toshiba-HDD recovery)

• Satellite L650-111 is not in support of Toshiba

  I have the Satellite L650-111 (number PSK1JE-00E00PY4) and when I try to access my computer Toshiba support page
  There is no success. Even if I try to use "detect your laptop" there is no success.

  In full (x) of Toshiba I could not find my model of laptop.

  WHY?

  I am very disappointed whit this situation, still more because as I got Toshiba Satellite A80-129 and together
  all drivers and support are listed.

  concerning

  disappointed with the user

  There is no reason to be disappointed.
  If you are looking for drivers and for some reason any correctly detect works option doesn t there is also a way to find all the drivers manually.

  You have the Satellite L650 with PSK1JE model number. That s all that you need to know.
  Please check again, and if you still have the problem of finding the drivers I will explain how to find them.

• After downloading the recovery "Disk Drill" software it installed an SSD SM768E monitoring program.  I have not used the software "Disk Drill"

  A SM768E of SSD monitoring program is running on my computer.  It appeared after I downloaded, but did not use the file "Disk Drill" and deleted recovery software.  I can't get rid of the monitoring software SSD.  Spin El Capitan 10.11.5 on a 16 GB MacBook Pro retina with processor Intel Core 17 2.7 GHz.  By clicking on the icon tells me to go to "Disk Drill" but its been deleted.  Can I temporarily stop the control, but it starts every time I put on.

  http://help.cleverfiles.com/how-to-uninstall-disk-drill/

  You may need to install the SD to remove it completely

• U840-111 satellite shows an error at startup

  Basically, I was using my laptop computer and suddenly, he crashed and grew the "blue screen of death" I restarted and let the restore program starting run.

  After that he had finished he kept makes this message 'there is a problem because of evil to disconnect a device as an external hard drive. If this message persists, contact your hardware vendor... I tried to reboot several times but nothing helped. I think I might need to restart using a boot disk (which is a problem that the laptop didn't come with an os disc) or even take it to be repaired.

  Any advice.

  Stand by.
  According to specification your U840-111 was delivered with Windows 7 Home Premium 64-bit pre-installed. Original recovery image is saved on the HARD drive and it is strongly recommended, and described in the user s manuals document the laptop owner should create recovery media that can be used if the disk HARD recovery doesn't work.

  For notebooks without optical drive, it is clearly described that recovery media bootable USB can be created using preinstalled Toshiba recovery media creator tool. So first question: you created this bootable USB key?
  >... and let the start of the restoration program managed
  Do you mean that you have started the HARD recovery disk image installation?
  > I use a USB boot drive.
  Does that mean exactly?

• Screen of C850 - 1 H 8 satellite flashes and turns off using SSD and win 8

  Hello, I bought a C850 - 1 H 8 of Ebuyer and I removed the hard drive installed windows 8 on it and installed my SSD, and then a clean installed Windows 7.

  The laptop was working perfectly, and then after a little more than a month, the headphone jack has become defective intermittently. I contacted Toshiba, they picked up the computer laptop, fixed and returned.

  When the returned laptop, I still pulled the hard drive provided with Windows 8 and replaced by my SSD with Windows 7 top.

  The laptop screen started flashing on and outside. So I thought ok, they must have changed the material. Using the SSD even I formatted it and then reinstalled Windows 7.

  I find that contrary to front - that my laptop according to the system information for Windows - is manufactured by LG and not Toshiba.
  I also find that the desktop screen and startup splash turned into a screen LG and not an a Toshiba.

  I contacted Toshiba and they gave me, told me to ask for a replacement from Ebuyer. I was passed between the two companies constantly. Then I took the hard line with Toshiba and said that they have damaged my computer and I want a replacement or I will not buy another Toshiba product.

  I then return a petulant response from Toshiba, actually insinuating that aside from the faulty earphone Jack, it was my fault. Incredible.

  I had not used my new laptop at all really after all of this, because I'm sick of all this. But today I started to use it again, and after some time of use, the screen flashes again. Even after using a new installation of Windows 7 and the clean use of Toshiba Windows 7 64 bit drivers for the right model.

  What can I do?

  See you soon

  + The message was edited summer - subject wire +.

  > When the laptop returned, I still pulled out the hard disk provided with Windows 8 and replaced by my SSD with Windows 7 top.

  It was not good because headphones is part of the motherboard and I think they replaced the motherboard. In such cases, the bulk of the material is changed and do not use the same system pre-installed due to the compatibility of the driver. This can lead to physical problems.

  But the screen flashes at the beginning with 8 win preinstalled?
  Have you seen the LG sign turn on/off the unit after replacing the mobo?

  Maybe service guy (ASP authorized service provider isn't Toshiba but independent company) I forgot to update the DMI and therefore LG sign appears on the screen.
  But in my opinion this should not affect the screen but this should be verified using Toshiba original image (Windows 8)

• Satellite P500 - keys open 'find' / 'search' - number NOT used

  * information system *: BIOS Version/Date TOSHIBA V1.60, 26/05/2009: Vista SP1: windows explore 8: 64 bit os: laptop Toshiba Satellite P500: computer is less than 1 mth old

  * Problem *:
  1 keys not 'use' numbers... when any number on the numeric keypad is indexed it activates the field 'Search' or 'search' to the program I use.
  2. keypad digital won't "unlock" - light is always turned on.

  Example: If you are using IE8 the field 'search' active that if you pressed Ctrl + F or in other cases (using software), the window opens as if you clicked the icon key windows + F.

  I guess I have activated a hotkey of somekind... or...?
  I can't associate this problem with any program installation or update - had not done anything when I first realized my number of buffer problem.

  Windows Vista SP1 - explore 8-64 bit os - computer toshiba satellite P500 laptop. Computer is less than 1 mth old

  + Thank you for your help +... I really miss my keypad use and it is frustrating to have close the active window/tool "Search/search"

  I'll probably need the KISS method - I am not real computer savvy.

  > 1. Keys not 'use' numbers... when any number on the numeric keypad is indexed it activates > field 'Search' or 'search' to the program I use.
  > 2. Keypad won't "unlock" - light is always turned on.

  Maybe your first question has something to do with the second point and the fact that you can not unlock or disable the numeric keypad.

  Have you tried to activate and deactivate the keypad or by pressing the NUMBER lock using?
  Check it!