Satellite Z30-B-100 - Correction of the date of purchase after registration

Similar Questions

• Cap broken on Satellite Z30-B-100 keyboard key

  I just bought a laptop Satellite Z30-B-100 by a reseller in my country (Italy) line, it is only after a few hours use the keyboard is out of order (the i key), one of the four metal hook that bind the key to the Board of Directors is broken.

  I can guarantee activate collect and return, the dealer didn't answare at my request, the Toshiba help various numbers 1.27 / minute and after wating for more then 5 minutes thay (7!) close call, ther is not online or e-mail support. What I have to do to get applied my warranty?

  I am very disappointed.

  Thanks to who can help me
  Belvisi

  

  I have the same problem... You have your fixed keyboard? SRY for digging this post...

• Confirm the date of purchase of your product

  How can I validate the purchase date

  Using any number of documents showing the date of purchase of the product, for example an invoice printed and dated. The date was simply correspond with the product serial number, on a very rough range of dates.

• How to find the date of purchase of my windows?

  I don't know the Date of purchase of windows, I can find it using the product key? or another procedure?

  Really, there is no way to find the date of purchase by using a Windows installed, Windows Installer CD or product key.   You need to find the original "Bill" room, you bought your computer or Windows.

• where do you find the date of purchase on your computer

  Im trying to upgrade to windows 7, but it asked for the date of the purchase I don't have reception more and then I try again, it said that it is inelegible because he already has my serial number

  Hello Jonesejeans,

  Thanks for posting on the Community Forums of Microsoft Vista.

  Since you have lost the receipt of purchase of the computer, to get the date of purchase of the computer, you will have to contact the manufacturer of the computer and check the same.

  In Windows, you will not be able to find the date of purchase of the computer.

  However, you can find the date of installation of Windows on your computer that could help you.

  To find the date of installation of Windows on your computer, follow the steps below:

  1. Click on start and open computer.
  2. Click on the C drive and right click on the Windows folder.
  3. You can find the created Date of Windows folder.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• I don't remember the date of birth during registration

  Help, please! I don't remember the date of birth when registering ann

  but I remember examination questions

  How do I solve this problem

  answer!

  < re-titled by host >

  If you know security issues and the password of your Apple ID, log on to https://appleid.apple.com/account/manage

  You birthday if poster in the section account near the top.

• Satellite A100-590 PSAA9E freezes on the Toshiba start screen after BIOS update

  Hello.

  Yesterday, I made an update of the BIOS on my Satellite A100-590 PSAA9E 03Z00QGR with the appropriate flash:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 17 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = all & selectedLanguag e = 17 & type = all & page = 1 & ID = 58477 & DISO =-1 & driverLanguage = 42

  BIOS - 20070709111839.zip

  After flashing, the machine restarted automatically, but unfortunately it keeps now suspended from Thoshiba welcome screen. Also by pressing F2 or F12 will not change anything. It seems that the BIOS is damaged.

  I saw that in the BIOS package are delivered the two files (s10gm590.rom and s10pm590.rom) flash. But just the execution of the BIOS590MP.exe SanAntonion10 a .vbs script starts decides which automatically selects and loads a flash file. Maybe she chose the wrong?

  What should I do now? Is there a way to restore the BIOS, or do I have to send my laptop?

  Thanks in advance

  CARPET

  Hello

  sounds are really serious. Unfortunately, I can just give you the only clue you will get with each user here in the forum:

  Find the nearest authorized service partner (you can find one by using this link: http://209.167.114.38/support/Download/ln_byModel.asp)
  and bring your machine. In addition, you must explain the guys what happened so they can do something for you.

  Good luck buddy

• Save the data before and after the occurrence of a Trigger Condition.

  Hello

  I am worrking on an application that acquires data from 64 channels and performs many analyses.

  Necessary to implement something is recording the data in the event of alarm condition.

  I've implemented datalogging in many previous applications, but this one is difficult.

  I need to save data for a few seconds before and a few seconds after the alarm has occurred in a single file.

  I thought constantly write data to a file PDM and at the same time deleting the old data, until the alarm trigger occurs.

  but I was not able to do, since I have no blocks to remove data from a PDM file.

  I'm looking for the ideal approach to this recording.

  Any help will be appreciated.

  What I have to do this in the past, use of a queue with loss as a circular buffer.  When you get the relaxation, dump you the data in the queue to your file and then save however many data you want after the outbreak.

  For the purposes of the memory allocation, do not use the queue to rinse.  Use rather a Dequeue element inside a conditional FOR loop with a 0 timeout (reading the queue stops when you have a timeout or you read X samples).

• Can I book the order lines automatically after registration?

  Hello!

  Whenever I have a sales order, after the creation of a line, I'll in tools > planning > reserve in order to reserve the quantity and then again once I go to tools? Scheduling? Booking details to enter the lot (expiring items). Can I automate this process, right after that the user registers, lines are reserved?

  Thank you.

  Jon

  Hello

  I guess you want to make the orders but with no transactions shipping. You must have the line Flow - generic, Bill only with the Interface of the inventory as well as the above configuration.

  With reservations "Line Flow - generic, Bill only with the Interface of inventory" will happen (when there is no barrier to stock and the time of the order of the date of receipt) without the need of shipping operations. You must run the Manager Interface or schedule to run to ensure that the reserved quantity is released before billing.

  Hope that clarifies.

  If you are satisfied with the answer please mark it as Correct or useful response

  concerning

• labVIEW does not correctly read the data

  I'm new to LabVIEW (use it for a subject in College), but I coded a short program which counts the fronts and edges of a signal (to be used with the addition of a quadrature encoder).

  I tested it at low frequency using the block to simulate Signal and it works fine, but as soon as I have the pump up to anything above 4 Hz, it starts to play up (including a positive benefit as a negative benefit). 10 Hz, it is not the edges at all. Same thing with the encoder - when turning very slowly the counties to register very well, but even a moderate speed and it will start missing.

  Don't know what the issue is. The code is pretty simple, so I don't know how this would have caused the problem. Here's a copy of my counter block (the entrance of true/false indicates whether to count the upwards or downwards).

  Are adjust you the length of your signals simulated when you vary the frequency?

  Your Subvi seems to be just looking for a transition in a waveform.

  Your simulated signal Express VI is set up for the sampling frequency of 1000 Hz and 100 samples.  If the outer loop iterates at 10 Hz.  If your frequency of 5 Hz, then you will have 1 transition in the waveform section and you will be able to detect it.  You go higher in frequency, then you could have multiple transitions in your waveform, but the Subvi seeks only to the first, and he might not even have this one.  Remember when I said that you need to run your loop two times faster than the incoming wave?  Well now you see that the ratio of 2:1.

  Adjust you the length of your simulated signals that you set the frequency so that you don't get multiple transitions on the waveform that you generate each iteration of the loop.

• 3160 AC 7260 Intel wireless upgrade - missing bluetooth Satellite z30-b-100

  Hello

  I updated the AC wireless intel 3160 to 7260. The wlan and the WiDi work but, but bluetooth has disappeared from the Device Manager of. I tried to install the updated BOF this combo card. I can't install but the bluetotth does not work. Any ideas?
  I have red, this one sulution is by typing the PIN 51 card (it applies to version HMW). But my map is NGW 7260. I don't know what to do with this card, I can't find any PIN diagram.

  Kind regards
  István

  Dear Gladyshof,
  I can't read your post. Something wrong with the characters
  Concerning
  István

• Satellite Z30-B-100 - no HARD drive recovery

  Hello
  I made a mistake. I made the change of the partition on the SSD (drive c).
  After that, the recovery feature does not work. But I see the hissene recovery partition. How can I copy this partition on USB drive as bootable disk?
  I managed to copy the partition hidden with the partition program, but I can't boot from USB. I hope that there is a good method to copy the files for recovery as bootable.
  Can you help me?
  Kind regards
  István

  I tried this method http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
  but I don't know how to copy it, because I don't know the drive letter of the hidden restore partition.
  Is is good to try this command ('XCOPY d:\*.* y:\/e/s/f") as a copy of drive c to usb?

• Unable to keep the fate of the date of receipt after sort 'read '.

  I sort my Inbox so that unread emails appear on top with the most recent at the top. I used to get there by clicking on "Received" until the messages are sorted most recent dates at the top and then click on the "sort by read" so that unread emails are displayed at the top. Lately, I think that since the last update to Thunderbird, by clicking on the icon "Sort by read" recovering "Received" to the older sort order at the top. How can I go back to the previous behavior?

  The sort toggle «Received» works as it should on its own.
  The problem is the following: click twice to sort the messages with the most recent at the top. Then click on the "Play" icon once, unread messages down with those most recent at the top. Now click the 'Play' icon a second time to see unread messages appear at the top. Messages are now the oldest unread messages at the top instead of the most recent.
  ... Subsequently
  I have now reinstalled Thunderbird and the behavior is as I want.

• Rename a file with the date and time after unziped

  Iha ve a google earth kmz which is uploaded to our directory root. I am eager to see how to rename this file once it is droped in our directory. Here's what I have so far

  < cfif FileExists ("#expandpath(".") ("#/ temp.zip ') >
  He got... extract... < br / >
  < cfzip action = 'decompress' file = "#expandpath(".")" #/ temp.zip ' "
  destination = "#ExpandPath(".") #"
  Overwrite = "true" >
  < / cfzip >

  Right now the code above decompresses the file and place the KMZ in the root of the drive. I wanted to rename the file the current date as as follows RT_2010_03_17_12_00.kmz

  I have no idea how to proceed.

  would probably help you find what is the dynamics of the file name.

  the DateFormat() attribute should help you create a date string in the format to be used to rename the file.