Satellite Z930 - dual screen possible?
Hi... is this possible on the Z930 at the exit of two different views at the same time? A monitor to the VGA port and another HDMI - each independent display port, extend the windows desktop?
Thank you.
Hello
No, AFAIK you can use VGA or HDMI output.
For the video signal to the external display, you must press Fn + F5 and my knowledge, you will get a VGA or HDMI output.
If you want to use two external monitors, I recommend to use an external device for Dynadock
Tags: Toshiba
Similar Questions
-
Satellite Z930 - Possible WiDi with the Intel Core i7 CPU?
Hello
I have a Toshiba Satellite Z930 and I am trying to expand the display of the monitor to a new TV that I just bought wireless. -Is is possible to connect to the laptop via WiDi?
Main specifications of my laptop are:
-Intel Core i7-3667U @2. 00 Ghz
-Wireless LAN - AR9485WB-EG Atheros wireless network adapterAny ideas?
M.
Hello
Intel WiDi is based on Intel technology and this support depends on the Wlan card built in Notepad.
You need to use the Intel WiDi, Intel WLAN module which is part of the 6000 Centrino series.As you mentioned in you original post above; the laptop seems to be equipped with an Atheros WLan card.
The Atheros WLan card does not support the Intel WiDi and therefore, you will not be able to use this technology. -
Satellite Z930-12Z - add RAM and replace the SSD
Hi all
I'm new here and read some articles also on the Z930-12Z Satelite but I have two questions on the Satellite Z930-12Z:
1. What is the maximum RAM for Satellite Z930-12Z? There are two locations inside or accommodation?
I read this blog, but I don't understand if there are two slots or a slot...
https://Forum.Toshiba.EU/showthread...Llite-Z930-12Z2. could I change the SSD? Is there a maximum GB for SSDS for my Ultrabook? No matter what SSD I install?
I had these SSDS:
2.1 Kingston SMS200S3 / 480 G SSD 480 GB (6.4 cm (2.5 '' mSATA)
2.2 MZ-M5E500BW Samsung SSD 500 GB (mSATA)No matter what SSD I install?
Thank you in advance!
Rebecca Bugday
Two DIMM slots with 16 GB support apparently. You won't need 16 GB. Take a set of 2 x 4 GB RAM dual channel, I'll leave a link to a few good things that I use for my cell phone 16 GB
http://www.ebuyer.com/646124-HyperX-...1779&PKW=&Pmt=
Also, Yes, of course, you can change the SSD, you will need to get some kind of USB 3.0 in the first mSATA interface and clone the existing drive overall, because laptops do not want fresh windows install.
-
Need driver WLAN Win7 for my Satellite Z930
Hey, I've done a downgrade from win8.1 for win 7. now there are not installed devices, WLAN-driver and a USB device.
I tried all the Driver fron the Download Support Center. But anyone not working or is accepted. Can someone help me get the correct drivers.
Thank you
Hello
What Satellite Z930-xxx you have exactly?
To my knowledge the units were equipped with three different WLan modules; Intel, Realtek or Atheros are possible would be useful to know the model numberUSB drivers are also available on the Toshiba UE driver page.
I guess you have not installed the USB 3.0 driver and therefore the USB unknown device appears in Device Manager. -
Tecra M1 - dual screen can I?
Can I dual screen with a Tecra M1? I'm running a Trident XP4 chip. I checked all the options and I can run a second monitor showing excatly the same thing as my latop monitor, but I want to run as a second monitor to measure in the office, is - it possible on an M1?
Thank you.
Dan
Go to the properties of the graphics card (right click on the desktop and choose Properties), select the second display (2) and activate the option named extend my desktop on this monitor.
That s all ;)
-
Satellite C855-1QC screen is divided into two parts after the mode 'sleep'
Hi guys,.
I have the following problem. When I put my C855 1QC Satellite in sleep mode (sometimes also after a reboot). The logo at the beginning, when the system back to the top is fine, but the home screen becomes divided vertically into two parts. Good content is there, but flashes on the display.
I've found a workaround: I open a session, press Fn + F4 and click on dual screen. A normal screen appears, but does not cover the full size of the actual display. Then I click Fn + F4 and return to the initial display again and all is well. It's really annoying, so any suggestion is welcome. Oh, BTW my OS is 64-bit Wk8.
Second question relates to the brightness of the screen. I can't find a way how the brightness to adjust automatically according to the ambient light conditions.
Third and last one relates to the Radeon VGA, config tool at the launch said, there is nothing to configure.
Thanks for your suggestions,
Martin
Hi Martin
Described display problem is definitely not normal so I would know since when have you noticed it. I put t know what can be the reason for this, but I can't imagine there is a simple trick to fix this, so I recommend you to reinstall the OS using recovery media and test with the factory settings.
It will be interesting to know if the same thing will happen again and again.
In general all the drivers are included in the recovery image are tested and I can't imagine display driver may be responsible for this. Try please test with the pos and comments factory settings.
> I can't find a way how the brightness to adjust automatically according to the ambient light conditions.
As much as I know something like this is not automatically due to lack of light sensor. The display brightness must be changed manually. -
Dual screen monitor - bad resolution options
I have a Dell Latitude E6420 running Windows 7 Professional 64 bit which I use to several jobs in various locations. Most have a docking station connected to one or two screens (one VGA, one DVI). I run dual screen as often as I can, so, even at a workstation with a single monitor, I use the screen as a second monitor. I also give presentations from my laptop, usually via a VGA connection port of the laptop.
There is a special meeting room which has two screens plasma inside that depend on a VGA connection (must therefore always show the same performance and appear as the single monitor when connected to the laptop). I use a lot this room. Until recently, when I plugged it monitors would show an image full screen to ordinary resolution (800 x 600 or 1024 x 768). I use these as secondary monitors, with my laptop as main screen. I have check all monitor activity through the interface of the Intel HD 3000 graphics driver. The pilot is the last available from Dell (9.17.10.3040).
However, now when I plug in this House, secondary monitors show an image in a hurry (abscissa) and the single resolution options offered by the pilot are 1366 x 768 and 4 x 3. Yes, FOUR by THREE pixels. None of these are the native resolution (which should be 1024 x 768). Nothing I can will get monitors to display full-screen with good resolution. My colleague, with (in theory) the same laptop has no problem.
There also seems to be some sort of cache or memory for monitor configurations. Whenever I drop down to a workstation, Windows automatically configures the monitors in the way they were last time I was there (so with the monitors in the correct locations, resolutions, etc.). Is it possible to reset this memory, so that I can start from scratch?
Hello
Please contact Microsoft Community. I imagine the inconvenience that you are experiencing right now. The issue you described can occur due to the incompatibility of the display drivers. So let me help you with that.
You did changes to the computer before the show?
I suggest you to follow the steps mentioned below and check if it helps:
Uninstall and reinstall the display driver
First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=XGPWM
Uninstall the display driver, then reinstall it. Follow the steps mentioned below to uninstall:
- Press Windows + R, type devmgmt.msc , and then click ok.
- Search now and do a right-click on the display driver , and then click Uninstall.
For your reference, you can check the links below.
Work and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7
Hope this information is useful. Please get back to us if you need further assistance.
-
Satellite Z930 - 16K - backlit keyboard driver
Hello
After a complete new installation of my Satellite Z930 - 16K my bright keyboard no longer works. Should which driver I use?
Theanks in advance
HannesWin7:
Install Toshiba Value Added PackageWIN8/10:
The Toshiba system driver installation and system settings. -
What is the max for Satellite Z930-12Z RAM?
Hello
IM need to know the amount of maximum ram for the Toshiba Satellite Z930-12Z. Toshiba website tells me it is sold with 2 x 2 048 and you can develop a Sun with 4 GB upwards to 6 GB of ram with replaycing. on the site of kongston it is a 8 GB available Sun, so the max would be 10 gb (2 gb + 8 GB) is the module of kingston 8 GB (ATC-S3C/8 G)
http://www.Kingston.com/de/memory/search?DeviceType=19&MFR=TOS&line=satellite&model= 85359really compatilbe?
According to the specifications of the laptop you can upgrade your Satellite up to 16 GB. Compatible 8 GB of RAM has PA5037U-1M8G part number. The same figure on the page of Kingston.
-
Support for Windows 10 satellite Z930 - 16K
Dear Toshiba support and all users.
can someone confirm if the Z930, in particular the model 16K fully supports Windows 10, driver wise?
Are there problems or can I pass safely?
The download section offers only drivers for windows 8.1.Thanks and greetings
FlorianThe Satellite Z930-16 t belongs to the series of PT23L and this series of mobile is listed on Toshiba models supported for upgrading to Windows 10 Web site.
http://win10upgrade.Toshiba.com/swup...SPX?region=TEGPilots Win 10 / tools can be found here:
http://win10upgrade.Toshiba.com/swup...SPX?region=TEGI also recommend reading the discussions in the forum Windows 10 .
https://Forum.Toshiba.EU/forumdispla...194-Windows-10See also this thread useful;
https://Forum.Toshiba.EU/showthread...mation-website -
Satellite Z930 - Low Memory After installing Windows 10
Hello
I have a Satellite Z930, which works perfectly for years. I recently downloaded and installed Windows 10 and as soon as I did, I get low-memory computer warnings, the laptop works slowly and I need to stop it and restart it. I installed all the updates and I still have windows mail and web browser (a) open, but the problem persists. I used 75 103 GB of storage, not of course the relevance that is.
Any help would be appreciated, I'm tired.
Chris
Dear Chris,
I bet that for Toshiba support being able to help you, it would be necessary to know the exact version of the Z930 (e.g. Z930 - 16K) you have, including how (live RAM) is currently installed.Concerning
Flow -
Extremely slow on my Satellite Z930 - 15 X
Hello
Here is my problem (sorry for my English):
I have a Toshiba Satellite Z930 15 X.
For several weeks, it is very very slow. If eco or normal mode, it is still slower than the eco mode. * Even without running any program *. When I look at the Task Manager, everything is ok and fluid.
Is this a hardware problem?
I also noticed that the fan works far more often than the first months of use, even with just an open word document.The only solution I found is to restart the computer.
After each restart, it is fast as usual, but only for a short period. But at one time or another, the extreme slowness often returns after a break.* I also noticed that it often occurs after a suspension or the connection / disconnection of the laptop from the AC outlet.*
(I said I have a few programs installed and no trace of virus and other software malicious (I'm very careful about that)).
Have you had this problem, where it comes from, what can I do?
Thank you!
Hello
On this virtual path, it is not easy to tell what exact reason. To be honest I don't think that there is a hardware problem. Fact is that many background processes can slow down the performance of s for laptop. Perhaps some context downloads and installation of the update may be reason your laptop reacts quite slow.
Please check the commissioning and disable all unnecessary applications. If you do not use some of them, they should not start with Windows and run in the background. Also check Windows update option. Turn off automatic updating.
If please do first and check if the laptop runs a little faster.
Please post comments. -
Where can I get the right drivers for Satellite Z930 - PT23LA - 01 009?
A little history: I recently bought a version of Win7 to a Z930 in Auckland from PB Tech shop. I've updated to a clean version of Win8 64-bit. My Win8 seems works ok but I noticed something strange in the Toshiba PC Health Monitor - apparently the Toshiba HDD/SSD Alert is not installed, so I don't understand not his iconic display in the health monitor (but the health monitor think my SSD is in "Good" shape - maybe it's reading the INTELLIGENT of my SSD interface, or maybe it's just saying 'Good' because the integrity monitor is apparently able to operate?)
I can easily find different versions of the Toshiba HDD/SSD Alert Utility in questionable Web sites - download, but I really prefer to get my Toshiba support drivers. Which leads to my question:
Where can I get the right drivers for PT23LA-01 009? NZ nor the webarea to Toshiba support have this model in their menus. The closest match seems to be
http://www.MyToshiba.co.nz/support/computers/Ultrabook/satellite-z930/pt23la-01f00n/download?OS=30
There is probably not much difference between a PT23LA-01F and a PT23LA-01 P but it is a bit of concern to be download & install the drivers for a chip that is no my model...
See you soon,.
ClarkPS: http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-HDD-SSD-Alert/ta-p/347120 advise me the area downloads for Toshiba support. He also advises "not all utilities are available for each model and operating system. During the installation of utilities, install the TOSHIBA value added first. "Sigh... so maybe my problem is that I installed the Win8 drivers & utilities order when build my own-building a Win8 pass win7? Wouldn't surprise me in the slightest... but if this is the case are here all other dependencies in these built?
> Where can I get the right drivers for PT23LA-01 009?
First series of Toshiba laptops (Australian, European, etc) is very similar to the other
Your model of laptop Australian Satellite Z930 * PT23LA * series is the same as the European model Satellite Z930 * PT23LE * series.That's why the drivers, tools and utilities published for Satellite Z930 * PT23LE * series must be compatible with the Satellite Z930 * PT23LA * series.
To get all drivers for Satellite Z930 * PT23LE *, you should check this page:
http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EUThere, you can get all win 8 - upgrade the drivers. Also the HDD/SSD Alert Utility v3.1.64.14
Welcome them
-
Satellite Z930 - suspend the problem with connected USB hard drive
Hello
Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:
1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?
(2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.
(3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?
Thank you.
1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.
2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.
3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.
-
Satellite Z930 - USB driver missing
Satellite Z930-13N
USB driver type by Intel xHCI shows the following error message:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Anyone can shed some light on it with a solution?
I looked on the TEMPRO Download Center but could not find a driver for my PC with Windows 8.
Thank you
According to specification for laptop, your laptop computer came with preinstalled Win8 64bits. Recovery image contains all the necessary drivers so I m wondering how one driver may be missing.
Have you installed a clean version of the OS?
USB 3.0 driver is preinstalled on your laptop? If you can't find it for your test of Satellite install for Portege Z930.
Maybe you are looking for
-
How can I follow what my employee seeks to in private browsing?
An employee of the mine is constantly using private browsing, and because the rest of my staff uses the usual browser, I think it's pretty suspicious. Please let me know how I can track the pages that he visits as the history is deleted when using pr
-
QuestionSir please help me with my home page. When I put my Home Page about: welcome it gives an error saying invalid Url... Please tell Me how to fix it!
-
MAX does not see the cards as DAQmx
I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E). For some reason any my measurement & automation explore (MAX) does not see them I expect. He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ reco
-
Midtown Madness and Midtown Madness 2 works not properly in Windows Vista
Hello, I am a representative of the Customer Service posting on behalf of a client. The concerns of customers is as follows: The customer has Windows Vista Edition Home Premium. It has installed Midtown Madness and Midtown Madness 2 on that computer.
-
Signature of the server problem?
Is there a problem with the signature servers. My apps worked very well until I quit them just in the last hour... now, they give a sure aPi exception whenever I try to run them. The signature tool says that the app has been signed...