Satellite Z930-12Z - add RAM and replace the SSD

Similar Questions

• What is the max for Satellite Z930-12Z RAM?

  Hello

  IM need to know the amount of maximum ram for the Toshiba Satellite Z930-12Z. Toshiba website tells me it is sold with 2 x 2 048 and you can develop a Sun with 4 GB upwards to 6 GB of ram with replaycing. on the site of kongston it is a 8 GB available Sun, so the max would be 10 gb (2 gb + 8 GB) is the module of kingston 8 GB (ATC-S3C/8 G)
  http://www.Kingston.com/de/memory/search?DeviceType=19&MFR=TOS&line=satellite&model= 85359

  really compatilbe?

  According to the specifications of the laptop you can upgrade your Satellite up to 16 GB. Compatible 8 GB of RAM has PA5037U-1M8G part number. The same figure on the page of Kingston.

• Satellite A30 921: how to remove and replace the memory?

  Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.

  Thank you in advance.

  Hello

  There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5

  Good bye

• Satellite S50T-B - adding RAM and swapping HDD to SSD

  Hello

  I recently bought portable satellite S50t-B and have a few questions about the upgrade:

  1. What is the recommended RAM to add (8 GB)

  2. What is the DVAR to add?

  3 are there instructions for adding more RAM and an SSD for my laptop?

  4. I void my warranty by installing more RAM and exchanging the current hard drive for an SSD?

  Thank you for your help

  Can you please send name of full model of your laptop? (S50T-B-xxx)

• I have different bookmarks I want to keep on each computer, synchronization will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place

  I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?

  Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.

  So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.

  I hope that clarifies the doubts...

• Search and replace the string formatting

  Hello

  I try to do a search and replace the formatting of a string.

  In the example, I'm looking for the string 'SUCCESSFUL', but it must also begin by usbflash and some number + PASSED.

  I can't get the format to have a number between 1 and 99. The number of replacements should add up to 6 in this case. I tried with \d for any number, and I also tried [1-99].

  Make a right-click on the function search and replace the string.  There is an option to use regular Expressions.  Then give it a try.

  

  EDIT: You need to set the entry replace all to TRUE.

• A Script to find and replace the layer names

  Is there scripts to find and replace the names of layers?

  There is an excellent script available for Photoshop that allows you not only to replace words in layer names, but also insert words as prefixes, Suffixes and sequential numbers.

  The version of the illustrator of this script allows only sequential numbering: it does not offer search and replace words.

  Ideally, it would be great if there were something that could find multiple and replaces in a go:

  (for example

  You have layers like this car, the dog, the bat

  You enter: because (Option1), dog (Option2), Bat (Option3)

  Your layers become then: option 1, option 2, Option3).

  )

  Big_SmiLe, which is a very good start! Step 1 of learning how to Script is indeed, by adjusting an existing simple script to make things more complicated. (And usually then "break something", which is also a necessary part of the process.)

  You are right your comment, it comes to repetitive things. For one or two different articles that wouldn't be a problem, but in the longer lists you are soon lost.

  As usual to work with lists of search - replace is to build a table:

  var layernames = [
  [ 'FHairBowlBoy *Hair', 'Hairboy1' ],
  [ 'FHairCurlyafroBoy *Hair', 'Hairboy2' ],
  [ 'FHairSpikyBoy *Hair', 'Hairboy3' ],
  ];
  

  The general idea is to loop through all the names, check if the current layer name is "layernames [i] [0]" (the left column) and if so, rename it "layernames [i] [1]" (the right column). If you know how to write a loop in Javascript, then you can implement this immediately.

  However...

  A more advanced method to do this didn't need even loop on all layernames - instead you can immediately 'get' the correct name by layer! It's magic! Almost!

  The trick is to use a Javascript object rather than a table. JavaScript objects are nothing special; "Layers" of Illustrator are an array of objects, and each object 'sex' has a 'name' property, which you can read and set the value. What I do here, is to create a new object, where the part 'name' is the name of the original layer and its value is the name of the new layer. All you need to check each layer is if there is a "object.originalLayerName" property and if so, assign its value to this layer name.

  It looks a bit like the table above, except that (1) you use {.} instead of [..] to create an object and (2) you add pairs "name: value" instead of 'value' only (in fact, the 'name' of a value in a table is simply her number).

  So here's what it looks like:

  // JavaScript Document
  var doc = app.activeDocument;
  // name indexed object
  var layernames = {
   'FHairBowlBoy *Hair':'Hairboy1',
   'FHairCurlyafroBoy *Hair':'Hairboy2',
   'FHairSpikyBoy *Hair':'Hairboy3'
  };
  // loop through all layers
  for (var i = 0; i < doc.layers.length; i++)
  {
   //Set up Variable to access layer name
   var currentLayer = app.activeDocument.layers[i];
   if (layernames[currentLayer.name])
   {
    currentLayer.name = layernames[currentLayer.name];
   }
  }
  

  Enjoy!

• ODI can load data into the planning and REPLACE the existing data?

  Hello
  ODI (9.3.1.1) can load data into the planning and REPLACE the existing data?
  Currently of our ODI by "ADD" load to existing data data - so that is I accidentally run the load twice, it would be double planning numbers. I don't know how to do it to REPLACE so that running more than twice has no effect.

  With the help of the essbase adapter you would use a rule of load, in the State of charge, you can set whether to replace or add to existing values. It is not difficult to pass.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Add, change and delete the file "iTunes" on a NAS

  I have just said "Apple Support Community" by Apple Support.

  The title probably sums up what I'm trying to do. I'm looking for a way to add, change, and delete files on a NAS.

  Hardware: MacBook Pro 15, 1 TB of storage, 16 GB memory, OSX El Capitan.

  NAS: Qnap TS - 453 has: storage nominally 16 TB, up to about 5 TB.  4 WD 4TB disks in a RAID 5 configuration.

  a Vaio WIN10 as well as a smaller MacBook (my wife)

  The purpose of the NAS is to provide a backup system for computers and act a server "iTunes."

  I acquired the NAS after the death of my WD MyBook live in December 2015 after five years of reading backup and "iTunes" to my computer and the Sonos system.

  After two months of 'getting to know you' with the NAS, I finally managed to configure the server "iTunes" and Mirabile Indo-European it works!  I'm just doing the SIN to a back-up for computers.

  Now for the question: I am looking for an app (for lack of a better term) that will allow me to add and remove files to and from the NAS "iTunes" folder

  My search for a solution so far has indicated that:

  (1) NAS' iTunes folder is not really true Apple iTunes and

  (2) I need something that is DAAP (Digital Audio Access Protocol) friendly, that would allow me to add, change and delete the files.that would allow me to add, edit and delete files.

  I'm not looking for something that would synchronize the files iTunes NAS to one of my computers, I am all prepared to do myself if necessary.

  If I can't find an application so I use the app 'Brute Force' change my Mac iTunes required records and download again to my NAS.

  Why do you need an app to put the files in a folder on the NAS Server?  Make them just above in the Finder.  Maybe I'm missing just your problematic here.  Do you mean add your PEMA files to iTunes? I've never used this file format, but kind of, I would be very surprised if iTunes supported it.

  the NAS iTunes folder is not really true Apple iTunes

  I don't understand what you're trying to say here.  "Apple iTunes" is an application. Yes, a folder is not an application.

  Be warned, we see not few messages from people that use iTunes with a NAS. Often the problems cannot be explained. sometimes just iTunes and NAS disagree togther.

• Laptop HP Touchsmart 15-D020: how to remove and replace the keyboard on laptop HP Touchsmart 15-D020NR

  I spilt a drink on my keyboard and now I can not turn off the caps lock and a number of keys does not work. I need instructions on how to remove and replace the keyboard frame. Thank you.

  On your page of support-look for Maintenance and Service of Guide in the manuals.

  http://support.HP.com/us-en/product/HP-15-D000-TouchSmart-notebook-PC-series/6627588/model/6761859/manuals

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• Steps to remove and replace the keyboard. HP Pavilion dv7-1448dx

  Hello. I have HP Pavilion dv7-1448dx. I have not available a manual where the path is directed to change the laptop keyboard. I need help to get the steps to remove and replace the keyboard. Please provide me with the support as soon as possible so that I can solve this problem. Thank you.

  Link to the .pdf manual

  Click above. We are not HP, all other users trying to help.

• I accidentally lost some jpeg files using movement and replace the function when transffering in a new folder. Where will the replaced files?

  I moved some images in a folder, some of the images already in the folder had the same name as the new scanned images IE 1 Scan, Scan 2 etc. I used the move and replace the folder without thinking that I was in a hurry. I still need replaced images but now I can not find them I thought that they would have ended up in the trash, but they aren't there?

  You can download some like this free data recovery software to recover deleted files.

  1 panda Recovery http://www.pandorarecovery.com

  2 recuva http://www.snapfiles.com/get/recuva.html

  3. undelete more http://undelete-plus.com/

  How does it work?

  When you delete a file on the FAT32 or NTFS file system, its content is not erased the disc, but only the reference to the data file in the file Table of Allocation or the master file Table is marked as deleted. This means that you might be able to recover files deleted, or to be visible through the file system again.

• G61 does not illuminate unless I have remove and replace the battery.

  Even when the power cord plugged in it will not light. If I remove and replace the battery it lights mode battery and AC. At the same time my HP Support Advisor and HP s Advisor "stopped working".

  I restore to a previous point, no help. Downloaded a new HP advisor, ho help.

  This happened after the recent big WIN7 updated. Help

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K

• How to have all audio playback with headphones and replace the speakers

  headphones and speakers - interface

  This is probably a stupid and basic question normally, I'd be embarrassed to ask. But I'm old enough not not to be bothered much more. I would like to have all the sound elements come through the headset and replace the speakers. But when I plug the headset comes through both. It worked fine a few days back, but not now. Help!  Please, I beg you!

  Hi pam1948,

  Here are some steps that you can follow and check if they help you in fixing the issue:

  Make sure that the headset is set as audio device by default.
  
  To do this, follow these steps:
  
  1. click the Start button, select Control Panel, click hardware and soundand then click sound.
  2. click on the read tab.
  3. select headphones and then click set as default.
  4. on the playback tab, select the playback device, click set upand make sure that the configurations are set correctly.
  5. click OK to save your settings.

  Kind regards
  Abdelouahab

  Microsoft Answers Support Engineer