Tecra M1 - dual screen can I?

Similar Questions

• I broke the Tecra M5 case. Can you help me to buy a new one?

  Sorry for my English!
  I broke my Toshiba Tecra m5 case.
  Can you help me to buy a new one? Or buy something back to that connect to LCD screen with most of the cases (I put t know what he calls, perhaps "first category").

  Please send the answer to the e-mail: [email protected]

  I'll send the message to your Email address because it is a public forum and all users must know the answers ;)

  In my opinion the ASP (certified partner) in your country should be able to help.
  Guys can directly order the necessary parts of Toshiba and could help replace too.

  Therefore, contact with the technician of ASP and ask for the manipulation of the Fryer!

  Good luck

• Re: Crash on Tecra M3 of screen

  This morning my Tecra M3 green screen LCD turned and then slowly disappeared in a cloudy cloud.
  When I restarted I had a large screen with red and white rays online and weird graphics.

  Windows XP logo comes up but is covered with white lines vertical white followed by many bosses of white stripes horizontal but then the OS is not kick in and I end up with a white screen.

  Maybe 5 minutes later I hear the theme of Windows but still no office - nothing.
  I don't see/hear the spinning of the HD.

  I tried to boot mode safe, where I always get red and white patterns, but I can make the text to start safe mode.
  I have recently re-installed XP of the original system DVD (version 2006 - I think) and everything seemed ok so far.

  I have a load of work to go for HELP!
  Is is ok to continue working normally in Safe Mode - it is possible to connect in this mode?

  Help!

  Safe mode is option that offers access in the operating system preinstalled if there is a problem and that you cannot use it in normal mode. In safe mode OS will be loaded with a minimum configuration and without important driver. It is not the solution for you.

  If I understand you, now you have the own operating system preinstalled. Try to start as usual and see what happens. I fear you have serious hardware problem and there is not a lot that you can do everything alone. Is the defective LCD screen or the graphics card does not work properly. What you can do is to test it with the external monitor. If these lines will be displayed again it is certainly because of the faulty graphics card.

  In any case, contact service and see what they can do for you.

• Dual screen monitor - bad resolution options

  I have a Dell Latitude E6420 running Windows 7 Professional 64 bit which I use to several jobs in various locations.  Most have a docking station connected to one or two screens (one VGA, one DVI).  I run dual screen as often as I can, so, even at a workstation with a single monitor, I use the screen as a second monitor.  I also give presentations from my laptop, usually via a VGA connection port of the laptop.

  There is a special meeting room which has two screens plasma inside that depend on a VGA connection (must therefore always show the same performance and appear as the single monitor when connected to the laptop).  I use a lot this room.  Until recently, when I plugged it monitors would show an image full screen to ordinary resolution (800 x 600 or 1024 x 768).  I use these as secondary monitors, with my laptop as main screen.  I have check all monitor activity through the interface of the Intel HD 3000 graphics driver.  The pilot is the last available from Dell (9.17.10.3040).

  However, now when I plug in this House, secondary monitors show an image in a hurry (abscissa) and the single resolution options offered by the pilot are 1366 x 768 and 4 x 3.  Yes, FOUR by THREE pixels.  None of these are the native resolution (which should be 1024 x 768).  Nothing I can will get monitors to display full-screen with good resolution.  My colleague, with (in theory) the same laptop has no problem.

  There also seems to be some sort of cache or memory for monitor configurations.  Whenever I drop down to a workstation, Windows automatically configures the monitors in the way they were last time I was there (so with the monitors in the correct locations, resolutions, etc.).  Is it possible to reset this memory, so that I can start from scratch?

  Hello

  Please contact Microsoft Community. I imagine the inconvenience that you are experiencing right now. The issue you described can occur due to the incompatibility of the display drivers. So let me help you with that.

  You did changes to the computer before the show?

  I suggest you to follow the steps mentioned below and check if it helps:

  Uninstall and reinstall the display driver

  First download the display driver and save it to the computer. You can download the latest driver to display from the link below.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=XGPWM

  Uninstall the display driver, then reinstall it. Follow the steps mentioned below to uninstall:

  1. Press Windows + R, type devmgmt.msc , and then click ok.
  2. Search now and do a right-click on the display driver , and then click Uninstall.

  For your reference, you can check the links below.

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  Hope this information is useful. Please get back to us if you need further assistance.

   

   

• Problem dual screen ' after working for a while, the screen of my laptop turns off.

  Original title: Problem dual screen

  I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

  Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

  KR

  bs3dm

  Portable computers support two monitors. The problem may be caused by two reasons:

  1. incorrect power setting.
  2. the problem with the drivers.
  1. you can download and open Microsoft Fix it for the question.
  2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.

• broken screen can I access my phone via laptop?

  broken screen can I access my phone via my laptop?

  Yes, you can connect to iTunes and iPhoto if your screen is cracked. The screen lights up at all? Or is it cracked.

• How many app screens can have an iPhone?

  My iPhone OS 9.2.1 5s race seems to be limited at 15 screens, showing 20 apps each.

  This is the maximum number of screens app, that this unit can display?

  What happens when I have more than 300 applications these screens can display?

  Where are the other apps? How can I make it appear on a screen, so I can delete them?

  Alternatively, you can set the app to a folder, which can accommodate up to 16 applications. If you use all the screens, only the "spotlight" search feature can find other applications on your phone.

  Also see this article: How to organize your iPhone Apps

• The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?

  Whenever I open a Windows Explorer window, the preview window to adapt is questionable.  It is anchored on the right side of the window.  Sometimes it's fine, other times, it covers more important data like date/time and file size.  If I have it full screen on my wide screen, everything is great, but when I throw it in my smaller screen, everything must shrink.  Rather than shrink the preview pane, it allows the preview pane cover the most important areas.

  The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?

  I don't think it can be docked to the left.  I know that the sector details can twisted to put it on the bottom rather than the side (like Vista/7), but the preview pane itself isn't such a tweak.

• Welcome screen for windows 7 Professional. the size of the icons on the Welcome screen is possible more great? The image of the Welcome screen can be changed?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: can the size of the icons on the screen of welcome is greater? The image of the Welcome screen can be changed?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  No solution to change the size of icons but there is another option to change the login screen, of Tweaks.com.

  http://tweaks.com/software/TweaksLogon/

• PC/tablet-is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard to use in the form of tablets, or screen can be reached for keyboard vertically or horizontally?

  Labtop / Tablet question -I'm shopping for a new Labtop.    Is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard used in the form of tablets and then transformed (with long vertical side) and attached to the keyboard to type a length full page (8.5 x 11 page) and then returned (long horizontal side) one attached to the keyboard (to be used as a stand) for a movie with all the features of present characteristics of a top laboratory such as 4 to 8 GB memory and a 500 GB hard drive (perhaps as part of the screen or connected to / through the keyboard, if it is used as a docking station)?

  It seems with all the technology of the tablet on the market that Microsoft or somebody would do something like that now.  Can someone help me? Thank you

  -Scott M

  PS: My wife has an ASUS transformer where the screen detaches from the keyboard, so it can be used in the form of tablets.  When it is attached to the keyboard, the keyboard acts as a stand to sit on the counter for watching movies.  And then the keyboard and the screen can fold them together, so when it is closed there is a stand-alone case. This, however, runs the Android operating system.  Basically, I want this same design (for the potability in a Briefcase), but with it running Microsoft Windows so it can be used as any other labtop.  It the keyboard could have a number pad are associated with, that would be a bonus.

  Hi pr-e-s,.

  You can check with asus.

  http://us.Acer.com/AC/en/us/content/home

  http://us.Acer.com/AC/en/us/content/group/notebooks

  http://us.Acer.com/AC/en/us/content/group/notebooks

• Tecra M9 - problem of extension Nvidia dual screen Mobile

  At work, we use M9 laptops with Nvidia graphics card.

  We have these laptops moored on a Mobile extension material

  I set the laptop to display to two external monitors that works well, until we want to disconnect the laptop for when the laptop at home.

  When they turn on the laptop, it will appear as the second screen and will not be usable.

  I was wondering if there are any settings that I can change to make him show the two external monitors when it is docked and display just the screen of the laptop when not anchored.

  I am aware that the utility of the device display, but this change does not offer two external monitor only offers internal and external.

  We are running Windows XP.

  Thanks in advance.

  You have the latest version of the BIOS installed?
  Have you installed the latest version of the display driver, common and Modules Extension Mobile software? (download them from the Web from Toshiba site)

  Have you tested with a new installation of XP from Toshiba (by running the recovery plant)?
  Maybe that's a problem of driver/software if you have a generic installation of XP is installed.

• Tecra A10 - dual boot XP and Windows 7

  Can I set up my Tecra A10 Windows 7 from dual boot with XP?

  I created a partition on the HARD drive. When I try to start my load of CIP 2 ser XP I can almost the first Setup screen then bomb out with a message saying to continue would be detrimental to my installation of Windows 7.

  Any ideas. Bobg

  Hello

  Of course, you can do a system dual boot with both operating systems. But before you change anything on the HARD drive partitions you create the Toshiba Recovery disk if you didn t it yet. With this record, you can restore the factory settings every time.

  Generally if you have installed Windows 7 first of all you need to create a new partition for Windows XP. You can install XP on this partition and you need to change the boot sector using EasyBCD or another tool.

  In your case, I would ask Google you'll find hundreds of tutorials how to make a system dual-boot. ;)

• Tecra 8100, black screen

  Hi people,
  My Tecra 8100 screen after 10 Minutes of work, dark. It s not the screensaver, absolutely! Cause I hear the sound of my games constantly.
  Sometimes, if I reboot the display comes back, or if I push the FN + F5 keyboard combination, but not always.
  Can someone tell me what wrong with my camera?
  A repair cost? Questions, Questions...
  Goodbye, Francesco

  Hi, my Tecra 8100 had the same problems. My dealer had to change the motherboard.

• Tecra A2 - striped screen of the chassis

  I have been using a Tecra A2 for about 6 months again and one of the first things that I noticed that the screen comes into contact with the body and created a line of 2 inches over the entire surface of the screen.

  This is usually not serious, but a few times I've worked and it's a real pain.

  This should be covered by the guarantee of the right?

  Thank you

  John

  Hello

  I put t know exactly if the mandate covered this default, but you can contact the service partner and ask for a solution.
  The call is free :)
  You can find the right service partner in your country on the official website of Toshiba.

  Good bye

• Tecra M3: black screen on startup, the vertical lines on the external monitor

  Hi all

  I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
  with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

  I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
  vertical lines in multiple colors. They change if I go to settings or you try to start windows.

  Does anyone have a solution to these problems?

  I have fear of solution can be given by the service only.
  In my view, this question must be tested properly.

  I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
  Here on the forum we can only speculate why this happen.

  As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
  Try to contact the nearest authorized Toshiba service and speak with the technician.