Save and read the value of control using xml

Similar Questions

• Save and read the metadata

  photos can be saved and read when selected, only the first selected did

  First press the key 'g' (put Lr grid mode).

• How to read the value attribute and put inside?

  What happens if we want to read the attribute value? And want to put the data of runtime on the value of the attribute as
  
  < psoID ID = "user id" / >
  
  How to get the value of the ID as the user id. And how to put the run value on it?
  
  I can think about is that
  
  /psoID/@ID/value GOLD psoID/@ID/*[local-name () = 'value']
  
  And how to put the value inside ID ="? »
  
  Thank you

  Because we are dealing with a structure of type anyType you must use the functions of node (local name) in combination with predicates ([]) to read or write values (node) of the element:

  To read the value for example use the copy rule:

  
  
  
  

  This wil read:

  /processResponse/result/psoID/@ID

  on the message:

  
  
  
  
  

  You will see the value 'B '.

  To write, you use:

  
  
  
  

  Kind regards

  Melvin

• How to read the extended cache file - config.Xml. in the C++ API

  I want to create my own XML configuration file and set the values of configuration in that, so that the client application in C++ (using C++ API consistency) can access the config files.
  
  Also how to get the instance of configuration values that read the customer of coherence.
  
  i.e.
  TangosolCoherenceOverride=$PATH/examples/config/tangosol-coherence-override.xml
  TangosolCoherenceCacheconfig=$PATH/examples/config/extend-cache-config.xml
  
  How to get the instance of this XMLDocument object? and read the values of the.
  
  Thank you
  Naveen

  Hello

  You can get the config cache that was read by recovering of the ConfigurableCacheFatory (which you can get the CacheFactory) by getConfig(). See:
  http://download.Oracle.com/otn_hosted_doc/coherence/352CPP/classcoherence_1_1net_1_1_cache_factory.html
  http://download.Oracle.com/otn_hosted_doc/coherence/352CPP/classcoherence_1_1net_1_1_configurable_cache_factory.html

  There is no way to get the real XmlDocument object in the cluster that is played for the config-cluster (if you could open the same way yourself).

  Thank you
  -Rob

• urgent request: how to read the value of a register using VISA read?

  Hello world

  This is a very urgent investigation. can someone help me please? Thank you very much!!

  I wrote a few commands in several registers using VISA write. now, I want to read the value of a different register.

  But the bytes returned are just the commands, I wrote before and a few other commands that I don't know what they are for.

  This is the format of the command, and I enclose the sheet... I want to read the value of register (0 * 41)

  .

  Ravens, if you have something more than me, do not so much it at all =)

  The command you have posted has several components:

  The gray area of the transport layer uses for a checksum

  several bits set to 0.

  a single bit to define if it's a read/write operation

  a byte to identify the register of interests.

  two bytes for the data.

  With what you have provided, there are only three things we need to worry:

  (1) set the R/W bit to 0 to mean we're reading rather than write.

  (2) set the second byte 0 x 41 to focus on the register of interests.

  (3) with a reading, I can't imagine the last issue of two bytes.  They probably ignored.  The documentation you provided does nothing to explain this.  The most logical thing I can think is that these two bits contain the data, you go to the registry if you set the R/W bit to 1.

  There are two parts to this communication.  The first part is an entry VISA to send this control unit.  It is likely that you will need to complete the message.  You will need to know how to do this.

  The device must respond with the message that you mentioned in the original post.  Crows is right.  He's coming back as a string.  You can use the subset of string to separate the components defined by the standard.  You can use these components to determine if the data is legitimate and then do what you want with the data.

• How do I click on a cell in a table control and display the value in a string?

  What I want to do is click on a cell in a table control and have the value of the cell in an indicator of the chain. Cell that ever I click on, I wish that the value to be displayed in the indicator.

  Thank you!

  Use the property "Change Position".

• Ring control output is the name of the item and not the value

  Hello. I'm new to Labview. I'm experimenting with labview and create just simple VI to learn more about the software. I placed a control of the ring and attached an indicator to this control of the ring. I found that the object of a control ring to select an element and an output value. For example, I placed 3 items in the properties of the ring (red, blue, yellow) and given the value of these items 1,2,3. But when I run the VI and select blue, I was expecting the indicator attached to the control to read 2, but on the contrary, he says 'Blue' (even for other items). What I'm misunderstanding here or to hurt? I've also attached a screenshot.

  Your meter is another ring that has the same pair name / value, so it's going to see the name associated with the value.  Remove the ring indicator and just drag in an ordinary digital indicator.  Then, it will show you the value.

• [ADF, JDev12.1.3] Lined back workflow a lot of values used as a dialog box. How to specify and pass the values to the btf appellant?

  Hallo,

  I've created a workflow bounded (containing JSPX pages) that I use as dialog box.

  There a lot of return values...

  

  I would like to how to go and read all values ret in the workflow limited appeal because the return value of dialogue seems to not allow a value...

  

  Thank you

  Federico

  You can try with returnListener, then to returnEvent.getReturnParameters ( https://myfaces.apache.org/trinidad/trinidad-api/apidocs/org/apache/myfaces/trinidad/event/ReturnEvent.html#getReturnParameters%28%29 )

  Dario

• How to read the values of the variables of façade in loops without using local variables or property value nodes?

  I know that local variables and nodes of property value are causing a lot of problems.

  But if I read the value of a variable front outside a loop.

  the value is only read once before the start of the loop.

  Changed the front variable values during the iterations of the loop, is invisible.

  How can I solve this problem?

  
  

• read the values of an array element and by sending a digital output to a designated channel according to the value read from the table

  Hello world

  could someone help me before I get out of my hair. Here's my problem.

  I read 3 values of an array of 3 elements i.e. 1,2,3. These values are then compared to a constant value, example if the first element of the array is 1 and it meets the comparison condition can send a digital camera of output for that channel on data acquisition

  I want to be able to send a value from a table to its corresponding comparison and then on its designated channel on the acquisition of data, the whole point of this is due to the fact the table element will not always read the value 1,2,3 for example could be 2,3,1

  Here's one the vi I have so far

  If someone could help it would be much appreciated

  all the best

  brand

  Take time to explore the many examples included with LabVIEW that cover the basics.

  -Indexing table

  -reading a spreadsheet file

• I opened a word from Windows Mail document, changed using Word 2007, you press on save and close the document. Now I can not find where he saved.

  original title: Windows Mail ate my file

  I opened a word from Windows Mail document, changed using Word 2007, you press on save and close the document.  Now I can not find where he saved.  I tried the search function in Vista, but it can not find the file either.  I tried to re - open the file in the email, but I just get the original version.  Can anyone suggest where it might be?

  Thank you very much

  Eamonn

  Once you open a Word attachment in an email, you must save it to your HARD drive until you make changes. If you do not, the changes are lost, but the original attachment is still with the e-mail.

• How to read the Serial Arduino data using labview VISA?

  Hi =). Im a beginner work reading data series from an arduino but im facing... Lets do it step by step

  I built a voltage divider circuit which gives from output
  from 0 to 5V. The output of this circuit is sent to a 0 analog input pin
  of a Committee of Arduino Duemilanove.

  (1) Firstly, I connected the cable to connect to my laptop USB the Arduino.

  (2) I went to start-> control
  Control Panel-> system-> hardware-> Device Manager. Check the Ports (COM
  & LPT). In my laptop I can see USB Serial Port (COM4). Now I know only in
  LabVIEW that I must read the data series COM 4.

  (3) to the side of the arduino, here's the code to read changes in voltage
  entered to analog pin 0. The last line of 'delay' determines the sampling
  Rate of how we want to taste the output of the voltage divider:

  int potPin = 0;    Select the input pin for the output of the voltage divider
  int val = 0;       variable to store the value from the probe

  void setup()
  {
  Serial.begin(9600) (9600);    Opens the serial port, establishes the rate of 9600 bps data
  }

  void loop() {}
  Val = analogRead (potPin); read the value of the voltage divider
  Serial.println (Val);
  Delay (10);
  }

  I slightly modified the basis series reading writing VI... I have
  attached the block schema used with comments. Basically, I tried to read
  data series, divide by 1023 and multiply by 5 to graphic voltage
  variations of the voltage divider circuit.  But Im not getting
  the correct voltage output values. The value of the tension just keeps go
  0 and coming again, as shown in the photo.

  Could you guys please guide me on what went wrong?

  Thank you!

  -you read the data, even if there is no data on the port. If 0 bytes are read => «»

  -in the case of false, you resources VISA wired for the output of channel tunnel?

  -There is no close VISA at the end of the VI resources

  -you're not a loop this VI reading bytes

  I added an addaption of your VI that you should give a try maybe

• Basic visa write and read the example

  I use basic visa read and write example to control my temperature controller in fact it works perfectly, but I want something else. First of all, I like to read the value of continuous temperature and it can be read on the read string section but I want to do but digital indicator to see the temperature value is it possible? And what is the function I should use for this? In fact I used the analysis of chain to do but I have not checked but it works or not?

  Second, I have to set temperature sometimes on the controller actually I can do writing tset = 025,0 to set the temperature F 25, it works when I write this command in the Panel (string to write), but I want to do like DIGITAL controller or something like that instead of writing the command for each setting is possible. I want to increase or decrease the temperature by pushing the increase or decrease button instead of write tset = 0.250 / a. could you help me with this?

  Thirdly, I want to run some parts of the program permanently a part when I want to run, as possible, now I have while loop and my example works permanently. I want because when I set the temperature which must not operate continuously, because it is a time command to read the temperature value this section runs continuously as the temperature on the experimental set-up is changing one I have to see this change, for example I set temperature 100 F and the peripheral controller 100 F heat , but this order is an order of time, but read temperature command should run continuously because the temperature is changing and I need to read the temperature for every 60 seconds and I can be a part.

  

  Make sure that you concatenate text constants "code view".

• DAQmx read - the values on the scale or not? Binary conversion.

  Hey everybody,

  I had a question regarding making the scale and the release of Renault. I use LabVIEW 2009 SP1, with a pilot DAQmx 9.0.2 and a X-Series card. I'm reading the data my DAQ and store it in a binary file.

  How is the acquisition of data read samples, in General? that is if I select NSamp NChan I16 2D Analog on my DAQmx Read, what kind of values can I expect if I was at the exit of the probe data? (Suppose I have readings in mV values and my overall fork's 04:55 V.) When he wrote in the binary file, what happens, what can I expect to see in terms of values - or maybe just descriptively?

  Overall, a little insight would be very helpful. I tried to troubleshoot asymmetric readings I received, so this will help me immensely.

  Thank you.

  Hi Matt87,

  Reading data as I16 will return the result adjusted, not calibrated for 16-bit ADC.

  If you want to write your own binaries, you'll want to include scaling of device - for series X, coefficients a 3rd order polynomial.

  Here are two examples that show how write to a binary file and read the data back.  In this example, scaling coefficients are stored in the file header:

  Continuous gain and voltage drop (binary) chart

  Graph of the acquired binary data

  That said, I would recommend that you look in the record feature integrated TDMS introduced in DAQmx 9.0.  The result is a file appropriate binary .tdms which is a standard format that can be opened in LabVIEW or in several other programs with the plugin.  See the following examples for how to use the function:

  Streaming data and log to the PDM file

  Continuously to log in a PDM file data

  The second example does not force you to read the data in the memory of LabVIEW and use the minimum CPU.  The first example allows you to see the data that is acquired.

  Best regards

• Update and change the values when VI is running

  Hello everyone! I have a digital control slider and I want to be able to change and update the value when Vi is running. Can I use the property for this node?

  If it is a CONTROL (no), then it is for the user to set the value via mouse / keyboard.

  You can still set the value via the NŒUD of PROPERTY or the LOCAL VARIABLE for ALL controls.

  What difficulty do you observe?