Save disabled for no use of original reson.cannot product key activate why?

Similar Questions

• Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  I reinstalled my windows vista.made a clean install removed windows xp sp3 when I try to activate my windows vista Home Basic sp1 it say not validates the code supplied with the disc, the code is below my laptop and the cd is in the package with my laptop, I used the key once when I re-installed my operating system once and it worked perfectly

  If you get this message before you try to turn it on, it means generally that you must not read or wrong entered the key.

  Use a magnifying glass and a bright light to read the key (or ask someone else to read it for you)

  In particular check the characters B/8 and G/C/Q.

• I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.

  I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.
  It is upgraded, the other is an integer telling Windows Vista;
  and the little hard up and down, mouse from left to right,.
  or can you please sent a copy of a disc to my address, this is the right path for fixed my windows vista online.
  (try to contact technical support of the direct Vista operating system)
  How about upgrading to windows 7? Give me the vista on 'the base drive OEM' continues for facilities?
  ----------------

  Replacement OEM or software support of system manufacturer in most cases, you must contact the OEM (OEM) manufacturer or the manufacturer of the system directly to replace Microsoft software that was distributed by your computer. However, an exception is made for operating system service pack media *, for which you can contact us directly.

  • Contact information for the manufacturer of the computer, see the Microsoft Web site at the following address:
    http://support.Microsoft.com/default.aspx?pr=oemphone (http://support.microsoft.com/default.aspx?pr=oemphone)
  • If the product has been distributed by an OEM or a system integrator, the product ID contains the letters "OEM". Visit the Microsoft Web site at the following address, select the appropriate product family, and then follow the steps to find the product ID:
    http://support.Microsoft.com/default.aspx?PR=notsureoem (http://support.microsoft.com/default.aspx?pr=notsureoem)
  • For OEM software, the certificate of authenticity (COA) lists the name of the manufacturer of the computer under the software version name. For more information on the certificate of authenticity, see the Microsoft Web site at the following address:
    http://www.Microsoft.com/resources/howtotell/ww/FAQ.mspx#1 (http://www.microsoft.com/resources/howtotell/ww/faq.mspx#1)

    If you have System Builder software, the COA lists "OEM software" or "OEM product" under the software version name.

  * Note Service pack support only includes what is associated with the service pack itself.

  More information: http://support.microsoft.com/kb/326246

  Regarding Windows 7 - frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  lost product key

  I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  See http://support.microsoft.com/kb/811224

• Lost the disk for Installation of Windows Vista - can I use my friends with my product key?

  I am running Windows Vista on my computer at home, but I had this for a few years, and he began to have very slow, so I decided to completely erase the hard drive, now I know how to do this, but I need to re - install the OS when I'm done, but I've lost my Windows Vista installation CD , even though I still have my code/product key - it would be OK to use my drive of Windows Vista to friends with my product code?

  I tried this article: http://support.microsoft.com/default.aspx/kb/326246and he do not seem to answer my question - I'm trying to replace my copy, I just want to know if it is OK to use my friends?

  Yes.

  As long as it's a DVD from Microsoft and not a computer Manufacturer'e Recovery DVD.

  Read the information below.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I installed Windows 7 on my laptop using the original disk, but trying to activate it with the product key, it says that I can't use it. Any ideas anyone.

  I reinstalled Windows 7 on my laptop replacement (top/the original was damaged), but when I entered the product key Microsoft will not accept the number. All solutions anyone?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• using friends disc with my product key

  If I reinstalled vista on a friends disk to my laptop which was pre-installed with vista that crashed, I'd be able to use my original product key?

  Well, the worst case, you will need to call the manufacturer of the laptop computer (your own) and ask them to send you a set of recovery/restore CD/DVD - if you don't have a lot to lose.  Go ahead.

  When you say, 'crashed', what do you mean?  Unless the hard drive is dead (physically) then you should be able to use any restore process has been integrated into the system (unless it's a CD/DVD set you have obtained/summer supposed to do and you lost TI/never fact).

• Lost disc installation and documentation for Vista but who still have the product key, should be replaced

  I am a user of windows vista. I have loss all documents and the installation cd. Only produced key . How can I get an another free Windows CD?

  * original title - I Am A Genuine user of windows vista. I have loss all documents and the installation cd. Product key have only. How can I get an another free Windows CD? *

  Hi Aowlad,

  If your copy of Vista came pre-installed with your PC, you should contact the manufacturer of your PC for replacement disks. You will find no doubt that they will charge you for the replacement and they won't be cheap.

  If you purchased your copy of Vista in a store you will be normal should have the purchase receipt or proof of purchase (I guess a credit card statement would be sufficient, but I'm not sure). Take a look at this link for more details:http://support.microsoft.com/default.aspx?scid=KB;en-us;326246

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I entered my pin code for windows 7. I received my product key, but I do not or did not properly download windows7.

  What was wrong in my way to download windows7?

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Can I use a legitimate DVD Win7 product key to activate the operating system already installed?

  I used a DVD Windows 7 Home Premium I bought from Amazon to install on 2 computers, THEN discovered the 2nd computer would not accept the product key.  I don't want to reinstall the OS and I can't seem to find a place online legitimately sell just a product key, so if I buy another DVD on Amazon, the product key that comes with it will allow the existing installation to activate, or do I have to spend a day or more to reload the operating system, drivers, programs, settings etc, just to stinking activation?

  This information is partially incorrect. OEM System Builder licenses come with a product key.

  Yes, it does not require a clean install, but because you already have Windows 7 Home Premium installed to use your retail disk, all you have to do is to change the product key, no installation required.

• How can I set a default save file for scans using the Solution Center?

  Using Windows 7-64 bit.   All-in-one printer HP Photosmart C-309 Premuim has.

  Due to a crash of Windows, I had to install a new drive and reload Windows. I also rebooted other software like the HP Solution Center & drivers. My problem is that I can't find how to set a default folder for my scans.  This is NOT mentioned in the user manual, but it has been initially implemented by the HP Technical Support when the printer was new.  Can anyone relate how to set the default folders for my scans?

  Thank you.

  Tango

  When you go to the analysis, there should be a window that appears to select the format and the DPI of the analysis. There is also an option for the options of '/CSA/ '. Here you can change the default location to save on selecting another file of having sent them to analysis.

  I would like to know if this information helps, and have a great day!

• Can I use Windows 7 32 bit product key for Windows 7 64-bit?

  Can I do!

  Yes, you can, as long as you use the same edition.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• Had to reload Windows XP / need for support/computer a year/no valid product key / using service pack 3

  product key keeps coming back as a key invalid! service pack 3

  Hi H Inc_ West,
   
  Follow the steps listed in the article given below to resolve this issue:
  You receive an error message after you enter the product key when you try to install Windows XP

• Used Creative Suite 4 cannot license or activate?

  Hello

  I bought a used Creative Suite 4 one I did not know that the old Installation must be desinstallion or disable before I can use the software on my PC.

  But now the problem is, I have the software here, I have the serial number here, but the old PC, which was installed in the Creative Suite is damaged.

  If the seller does not have disabled the software.

  Please, can someone tell me how I can use the software and how I activated the software?

  Thank you very much

  Florian

  (It would be nice, if you can tell me the answer in German) :-)

  The sale MUST be a transfer https://forums.adobe.com/thread/1355892

  And the sales person should be the one to have Adobe disable serial number

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

• Can Microsoft provide me with an OEM for Windows media if I have the product key?

  XP Media Center operating system disk

  I have a computer that I am repair for a customer.  It doesn't have the disk to the operating system.  I need to get a copy of XP Media Center Edition OEM.  Can microsoft provide for me if I have a license key?

  If you do not have the OEM installation disks and Windows came with the computer:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/