SAVE PICTURES OF THE CAMERA CANON ON XP SP3

Similar Questions

• Put the picture of the camera in shared album

  Put up the picture of the camera to a shared album?

  Try the steps here:

  iCloud: create a shared album

• I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive. Is there a way to recover?

  I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive.  Is there a way to recover?

  Hello

  What version of Windows are you using?

  If it is deleted from the memory card, it can not be recovered. However, there are some third-party applications or the tool that will help you recover photos. If you have saved the pictures on the hard drive and deleted, so you can check in the trash.

  See also:

  http://social.msdn.Microsoft.com/forums/en-us/olsbgeneral/thread/10ef8d69-1049-49D3-9957-9e07d5ed5804/

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to download pictures from the camera to a folder

  Camera is Olympus SP590UZ.

  Does not seem to be recognized by Vista when connected.

  How can I download images to a folder on the computer.

  (Must be in a folder for the edition of Photodex ProShow)

  Hi Sean,.

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it seems you are trying to download pictures from the camera to the computer.

  It would be great if you could answer this question in order to help you further.

  Do you receive an error message or error code?

  Refer to the steps in the following Microsoft article and check.

  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  How can I get pictures from my camera to my computer? http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-get-pictures-from-my-camera-to-my-computer

  Keep us informed on the status of the issue.

  If you have suggestions/questions more related to Windows feel free to post and we will be happy to help you.

• How to download a picture of the camera or scanner?

  How to download a picture of the camera or scanner with paint for vista?

  Hello

  I suggest you to consult the following Microsoft articles and check if it helps.

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Scan a picture: http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-picture

  Hope the information is useful.

• Take pictures with the camera on the T410s

  Is it possible to take pictures with the camera of the T410s, and is there any software related to this?  I tried everything I can think of but no luck.  Are there instructions on how to use this camera somewhere?

  I would really appreciate any advice or assistance.  Thank you!

  Yawcam?

• Cannot install the camera Canon Power Shot A85 on Windows 8

  I used Canon camera digital solution disk, ver.17.2 to install my Canon Power Shot A85 on my computer Windows 8. The camera doesn't

  install, just ZoomBrowser EX4.6.

  Hi Gordon,.

  It would be great if you can provide more information about the issue.

  (1) what exactly happens when you install the camera Canon Power Shot A85 on Windows 8?

  (2) you get an error message? If Yes, what is the exact error message?

  (3) you have any previous/old drivers of the device and the associated software installed on the computer?

  (4) did you try to install the latest drivers and software on the Canon site?

  The Canon Web site shows that there is no Windows 8 driver for this camera model. The driver may be either included in the operating system, or you may not need to pilot. You can click on the given link and check details:

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a85#DriversAndSoftware

  Note: Select the operating system and check the latest drivers available.

  But because the device does not work with the drivers built into Windows 8, it would be preferable to contact Canon Technical Support for assistance.

  Hope this information is useful.

• When I try to open a picture from the camera raw bridge it appears subsequently me "camera raw editing is not enabled" "camera raw edition requires that a product has been released at least once to activate this feature, what can I do?

  When I try to open a picture from the camera raw bridge it appears subsequently me "camera raw editing is not enabled" "camera raw edition requires that a product has been released at least once to activate this function, may l.

  The Parent to Camera Raw/bridge software is Photoshop because the camera raw plugin is installed on your system with Adobe Photoshop.

  Please open Photoshop and edit an image in camera raw by going into the filters and then open the bridge of file > Browse in Bridge and check if the option to edit your images in camera raw directly.

  Also make sure that your camera raw plugin is the latest version see: Installer of plug in Camera Raw

  Concerning

  ~Assani

• I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?

  I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?

  Look at the base this workflow

• I can't import my pictures from the camera?

  I can't import my pictures from the camera into Adobe Revel. I import before, but now a cookie arrives. The cookie says impossible to import JPEG files. How can I change a setting for my photos of the camera can be imported?

  This looks like a known limit with how the operating system allows access to the memory card in your camera.  . If you connect your device to your computer via the USB port, please instead use a card reader, or copy the photos on your hard drive first and import from there.

• Satellite A300-177: how to save pictures using the webcam internal

  Hello

  I recently bought a Satallite A300-177 which comes with a web camera bulit in.
  I want to save pictures that I take with him, but it only allows me to send them a mail.

  Could someone help me how to save them or if not possible?

  Thank you very much
  Gill

  Hello

  I put t know if my advice will be useful for you as I don t have the A300, but another internal a series with the webcam.

  In my case, I have access to the software of the webcam. It appears in the taskbar.

  -Double-click and go to the settings.
  -You will find different tabs. Go to the tab called images.
  -Here, you should find the setting and the path to the images created.

  I recommend you to check the source where the created images were stored.

  Greetings mate

• Save pictures to the ENVI format

  Hello

  I do the image acquisition using a PCI 1426 acquisition card and the requirement, I have save the images to the ENVI format. When I searched for information on the ENVI format I found this link: http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1?pli=1

  Apparently, there is a header file in which the information of the captured image are registered. The device that I use is a line scan camera and capture energy strips any (not exactly what it is). What I need to know is, can I save the images captured in ENVI format? If I can, how can I write the header for the file information?

  Thank you

  Sandeep

  I think that I finally understand how to work with / create files Environment. In my application, I have a camera online scan that will scan/capture only a row of pixels in an image. It's like a normal camera, but the resolution of the image in terms of the complete image is an X by 1. In my case 800 X 1. The camera returns actually a 800 X 270 resolution image, but what represents the 270 is 270 bands of energy that the camera caught for that row of pixels. If the camera has captured 270 each resolution 800 X 1-band information.

  Now what happens after this is the case, the camera pivots from one (very small) angle and captures an another 270 information strips. How many groups is captured.

  Suppose that I captured 270 band information in 300 different positions of the camera. That is to say an image of 800 X 270, turn some angle to take another image of 800 X 270, turn a few angle etc... 300 times.

  Now, the ENVI header file should have the information

  Description Environment = {created ENVI file [3/17/20093:47 PM]}

  Samples = 800

  Lines = 300

  Bands = 270

  header offset = 0

  file type = standard Environment

  data type = 12

  Interleave = bil

  sensor type = unknown

  byte order = 0

  wavelength units = unknown

  Allows to observe some important fields from the list above

  (a) samples - it's the horizontal resolution of the image is captured. (800 in the resolution of 800 X 270)

  (b) lines - this represents the number of frames you available for capture. By lines of what this means is the number of lines (rows) that will be present in the final image that we will build with all the information you entered.

  (c) bands - this represents the number of bands of energy that the camera captures in each image, in this example it's 270 (the second part of the 800 X 270).

  (d) the offset of the header - this indicates if there is no header information before each image information.

  (e) type of file - standard Environment (explicit)

  (f) type of data - how many bits is taken to represent each pixel. My camera takes 12 bits to represent each pixel.

  (g) interleave - this indicates how the data is organized in the binary file. Certain amount of explanation is needed here, because there is confusion.

  Any ENVI file is actually two files, the header which has the above information and the second is the information of the image that is defined in the header file. So, the header file is like a map of the information of the image (in binary). Is what I'm doing, I capture a series of images and write a binary file. Thus, the first line in the binary file will be the first band of the first image, which is the first line of the 1st image of band. The second row will be the second strip of the first image that is in the 1st row of the second image of the band. The 270th line is the 270th band of the first image, which is the first line of the 270th band image. 271st ranked is the first group of the second captured image will be the second line of the 1st image of band etc.

  Therefore, we receive 270 (number of bands) resolution images 800 X 300 of 300 images in resolution 800 X 270. Each of the final pictures will be a bunch of information value. A row of PIX of each of the 300 images form a final image.

  This link has a lot more information about Environmental format images http://groups.google.com/group/comp.lang.idl-pvwave/browse_thread/thread/e29deda284a727f1

  There are many more parameters as those explained above, but the above are sufficient to start.

• How to activate the camera CANON G7x profile in LR 5.7.1

  Hey dear community,

  I'm trying to get the camera to my CANON Powershot G7x active profile, but it does not appear when I import my pictures from the CANON. All other profiles as G1x, G10, G11, G15 of Canon.

  What should I do?

  I use LR 5.7.1 on a MACBookPro Mid 2010 with OS X10.11.4 with 8GByte of RAM

  Thanks for feedback and Franconian spring greetings

  Raws G7X have been supported since LR 5.7.

  Camera profiles should include Adobe Standard and camera faithful/landscape/Monochrome/neutral/Portrait/Standard

  Lenses for the G7 X profile is built in and still more if that's what you're talking about.  6 LR and LR CC and CC of Photoshop with ACR, 8.2 or more recent, both have a way of seeing that an integrated lens profile is used.  Here's how things look at PS CC ACR 9.5, where, as you can see not one, the embedded profile corrects lens distortion and Chromatic Aberration:

  

  If you speak a G7X Mark II, so it's a very recent device, and Adobe is not compatible until after it's all first available for sale in the United States at the end of May.

• Pictures of the camera shows a white background

  I have the iPhone 6 s and wondering why my photos (say for example of a person with the ocean in the background) appear as the person is too dark with the ocean looking perfect in the background or the person lit up fine, but the background is bright white.

  Is there a setting to fix this, so that the subject of the image (the person) is properly lit and the background appears correctly?

  Hi DavidG21,

  Please visit Apple support communities.

  Looks like areas of the photos you take with the camera app on your iPhone to appear more or less clear that you are pregnant. This happens because the unit automatically adjusts its exposure (the amount of light in the scene that reaches the sensor of the camera) based on what is photographed. It is more noticeable in high-contrast environments like photographing a person in front of a bright ocean.

  You can use the HDR setting in the camera app makes up for it by taking pictures:

  HDR (High Dynamic Range) allows you to get great pictures in contrast situations. When shooting with the iSight camera, iPhone takes several photos in quick succession at different exposure settings - and they are based. The resulting picture has better details in bright areas and half-tones.

  Use the HDR. (iSight camera and FaceTime camera on iPhone 5 s and later versions) Press the HDR. For best results, keep the iPhone steady and prevent the movement of the subject.

  On the iPhone 5 s later, you can choose Auto HDR and iPhone uses HDR when it is more effective.

  Keep the normal picture and the HDR version. Go to settings > Photos & camera > keep normal Photo. The normal and the versions of the HDR photo appear in the pictures. Versions HDR photos in your albums are marked with 'HDR' in the corner.

  The iPhone user guide - HDR

  You can also tap on different parts of the screen when taking a picture to adjust the exposure manually and see how the photos will change depending where the image is sharp.

  The exposure is automatic, but you can adjust the exposure manually for the next shot by tapping on an object or an area on the screen. With an iSight webcam, touching the screen defines the focus and exposure, and face detection is temporarily disabled. To lock the focus and exposure, touch and hold until the impulses of the rectangle. The screen indicates to what exposure and focus are locked. Take as many photos as you want. When you tap the screen again, exposure and development of unlocking and face detection and automatic settings back on.

  The iPhone user guide - take photos and videos

  These two tips should help you to take great pictures with your iPhone 6s.

  See you soon!

• If I download pictures from the camera or device

  PART ONE:

  and save it in the downloads

  then open with "IPhoto".

  make changes minor changes IE, change the name of the file.

  export to

  Photo of Belinda finders - images...

  I can delete these old photos of downloads and Itunes, and those remaining in Finders - photos - will record of Belinda rest as is.

  SECOND PART

  If I have files of photos flies over from another computer and folders of pictures old - photos - Finders

  then open with "IPhoto".

  make minor changes, to change the name of the file,

  export to

  Photo of finders - pictures - Belinda

  Can I then delete the old folders of photos as well as those in iPhoto and just keep records of finders - pictures - Belinda.

  Do not use Photos or IPhotos save the place.

  Thank you

  Belinda

  Thank you

  Your workflow is not correct - not sure if you are just be sloppy in the descriptions or if you do not understand how iPhotoworks

  First of all what he 'downloads '? I guess that's the folder from the finder downloads

  You can not 'open' whatever whether with iPhoto - you must import photos into iPhoto

  It is not possible to change the name of any file in iPhoto - once imported a photo in iPhoto the file name can never be changed except by exporting form iPhoto in the finder

  Assuming that you have a default value (and highly recommended) managed library then there is no relationship between the original photo in the download folder of the finder and photos in iPhoto - and there is never any link between an exported photo and the photo in iPhoto

  And if you use iPhoto not to store your photos, then there is no reason to use it at all - just upload your photos and edit them with preview, items PhotosShop, Gimp or another editor - you simply present your difficult life involving iPhoto in the process at all

  LN