Similar Questions

• after user, login and welcome screen, the screen is black no office

  after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the only thing I get is safe mode with command prompt and the system recovery options. Inspiron 1526 less then years.

  Hi Lilrockmike,

  Thanks for posting your question on the Forums of Windows Vista.

  Have you tried opening the the Task Manager on the screen by pressing CTRL + ALT + DEL?

  If you are able to open the Task Manager, please follow the steps in the data:

  1. click on the processes tab.

  2. scroll to the bottom and check if explorer.exe is listed under the name of the image.

  3. If explorer.exe is not in the list,

  (a) click file and then click New task (run).

  (b) type explorer.exe, and then click Ok.

  (c) check whether you have the back office.

  4. If explorer.exe is listed,

  (a) click on explorer.exe, and then click end process.

  (b) click file and then click New task (run).

  (c) type explorer.exe, and then click Ok.

  (d) check whether you have the back office.

  If the problem is solved, I recommend an antivirus on the computer analysis.

  I will recommend you to a virus on the computer scan using a good antivirus.

  You can also use Microsoft Live Onecare anti-virus.

  http://OneCare.live.com/site/en-us/default.htm

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• We had to show the filter selection

  Hi gurus,
  
  I recently started working on WebAnalysis.
  I have the following requirement:
  
  We had to show the filter selection in tag which I have been using < filter, 0 > in the label.
  But the problem is when the user selects another table or data grid, these filters value is changed accordingly.
  
  I need to show a graph or grid only filters.
  
  Help, please
  
  Thank you

  Hello

  Usually the datasource WA threads are named as "ReportDataSrc", so if your first grid or chart uses ReportDataSrc1 as a data source and then the filter should consult this grid using this thread to data source name is
  >,

  This will give you the name of the first name of Member of dimension filter as a label.
  For any procedure, please visit the WA user guide.

  Thank you
  YSP

• The create a System Image will save the FPGA code and the RT code?

  I have some cRIO systems which were broadcast in our manufacturing plant for some time. A slight problem has been discovered in the programming and created a workaround solution, but a fix should be implemented. Currently, I have no way to test my new code without loading on the cRIO and it works on the tool while the product is running. If there is a problem and I need to do some debugging, the tool cannot be down for an extended period. I would write a vi that will save an image of the cRIO so I can reload the software that is currently running and prevent a situation of prolonged downtime.

  My question is, when I did in the past with a product that has different tests, calibration and the final client software RT, it seems that the code FPGA not be saved (not a big deal at the time since the new FPGA code was compatible with different deployments RT). The new FPGA code won't be compatible with the old RT software, so now I'm worried. I would like to just check on it until I have all the boss breathing down my neck. If the service will not save the bitfile FPGA, is there anything else I can do for the tool to return to the previous running state while I solved problems that may exist with the new code review? The original code was lost by my predecessor. Otherwise, I would use just that.

  Hi Jeremy,.

  You are right, because the create a System Image does not record the bitfile with the image of the RT. Using the configuration system API, you will need to deploy the RT image and then the bitfile FPGA compiled later. To ensure that you can return to the previous version of the software running on your RIOs, you could simply save the current image and bitfile before deploying the new image and bitfile.

  However, the best way to proceed is to use replication Deployment Utility (RAD of OR). I have provided the link to the tutorial on the wheel, where you can download the utility. This exe will make images of the any of your RT targets and will also include the bitfiles with them. You can also deploy these images to several targets at once. In particular, you can read about the Bitfile (s) configure for FPGA Deployment Flash; the bitfile will be deployed at the start when stored in flash memory.

  Replication and deployment (RAD) utility-

  http://www.NI.com/example/30986/en/

• Hi, I am trying to download the Lightroom 6 stand-alone version and get the following message just after a click of the extraction area: "the account was registered to another country. Please log out and log in with an existing account for this country.

  Hi, I am trying to download the Lightroom 6 stand-alone version and get the following message just after a click of the extraction area: "the account was registered to another country. Please log out and log in with an existing account for this country. "I'm in Namibia and tried to change my country of Africa, in the USA, but still the same problem. TIA

  Hi Annen,

  Please see the following forum topic.

  Try to buy the trial period in a different e-mail - message error "error in your account order has been registered for another country. Please log out and log in with an existing account for this country. OK ".

  Kind regards

  Sumit Singh

• Save the data before and after the occurrence of a Trigger Condition.

  Hello

  I am worrking on an application that acquires data from 64 channels and performs many analyses.

  Necessary to implement something is recording the data in the event of alarm condition.

  I've implemented datalogging in many previous applications, but this one is difficult.

  I need to save data for a few seconds before and a few seconds after the alarm has occurred in a single file.

  I thought constantly write data to a file PDM and at the same time deleting the old data, until the alarm trigger occurs.

  but I was not able to do, since I have no blocks to remove data from a PDM file.

  I'm looking for the ideal approach to this recording.

  Any help will be appreciated.

  What I have to do this in the past, use of a queue with loss as a circular buffer.  When you get the relaxation, dump you the data in the queue to your file and then save however many data you want after the outbreak.

  For the purposes of the memory allocation, do not use the queue to rinse.  Use rather a Dequeue element inside a conditional FOR loop with a 0 timeout (reading the queue stops when you have a timeout or you read X samples).

• Password changed on a Safari but Yahoo Mail account, I cannot save the new password and username.

  Yesterday, I changed my password to a Yahoo Mail account but Safari on iMac OSX 10.7.5, (6.1.6) won't let me save the new password.  Now, I have to type my username and then auto Safari fills the old password.  I can access my emails by typing the correct password, but I can't find a way to update Safari to remember the new password or user name.  I had a look on some forums and followed the advice given there, but none of them have worked:-check that the username box and password is checked; Delete the entry in the preferences of Safari; Check the drive in disk utility and click on repair disk permissions. Click on "Repair" in S.o.s. keychain and add the password etc in the keychain.  Remove all data from the Web site and clear the history.  Switch off and unplug before returning.  Can anyone help, please.

  Hello...

  You must remove the old keychain.

  Open Keychain Access located in Applications > utilities

  Then select passwords on the left.

  Type the name of your e-mail account Yahoo in search field top right of Keychain Access window.

  Then right or control click the keychain, and then click Remove.

  Now on Safari, go to Yahoo, sign in with your user name and password. You should be prompted to save the data in a new keychain. The next time you visit this site, Safari should automatically fill your login for you.

• Save the data of State machine after each iteration, then write all the data at once

  I have trouble finding in the best way to manage data generated by my state machine. Here are the data that it will save:

  * When pressure is set, a set point is returned.

  * When the pressure is set, a reading is taken a multimeter.

  What would be the best way to do this? Would it not be better to store all the data in memory, and then write all the data at once? If so, what would be the best way to do this? I want to use the tool to generate report after have set all the pressures. I joined my current application. Thank you all!

  
  

• Save the text data and digital

  Hello

  It is two part question/need help: -.

  1. I want to display the same number of decimal places on the table as in the attached picture.  In addition, include text on the last column of entry (as shown in the picture).

  2. I also want to save the data in a file where there are also many digital data and textual data as shown in the picture as an attachment.

  Any help will be greatly appreciated.

  Thank you

  hiNi.

  You must format the values separately and mount it as an array of strings. I don't understand the purpose of the shift register. Why are there controls and a case user operated inside the loop structure, because the loop will run so fast that any user control would be unpredictable.

  Here's a simple code (LabVIEW 8.5) that you could use. Modify if needed.

  

• Unable to save the exe. files and install downloaded software

  Whenever I try to download the software lately, it fails and says diagnostic tests c documents c\documents and documents\downloads\ (s-ware no matter what I try d-load) pc - install .exe could not be saved because you cannot change the contents of this folder. Change the properties of the folder and try again, or try saving in a different location. What should I do to fix this?

  Quick workaround: choose a different location to save the file, for example, your office.

  Diagnose:

  What version of Windows you have, including the service pack?  If you are unsure, do a click right my computer and select Properties.

  If there are problems in one of the following steps, report the complete text of the error message without paraphrase.

  • Open My Documents.
  • Double-click the download folder to open it.  Any problem?
  • Assuming that downloads folder opens, click file > New > text document.  Press enter
  • It must be a file named new document texte.txt in the downloads folder (you can not see the txt at the end, depending on your settings).  Was there a problem in the creation of this document?
  • Assuming that the file has been created, double-click it to open it.  Type a few characters.  Save and close the document.  All the problems?

• Muse CC 2014 cannot save the programe of work/close after using the function "FTP host download"

  Hi, I'm new and try the 'Upload to the FTP host' function yesterday and encountered this problem.

  The files got uploaded, published on the site immediately... but Muse seems to screw up a bit after that. I can't save my file as I am only left with file > open recent element and a few others not. I tried to close the program, he asked if I want to save the file. I clicked 'Yes', but he has not saved. The program did not close either. I have to close the program via the Task Manager.

  My assumptions:

  -This has happened after that I used the 'Upload to FTP Host' option.

  -J' I checked on the task bar, there is an icon "edge CC inspect." I don't think that it works because it is not installed on my computer and the options just brings me to the Adobe download page.

  -Prior to this, I downloaded Flash Builder Premium, but I used it just that I realized that I need to write the code that I suck at... so much that causes the crash?

  Google and realized there was a similar, but unanswered thread in Adobe communities.

  Someone help? This is a very handy feature that I like to use...

  Hello

  in case you always get this question

  Please download the http://muse.adobe.com/assets/ftp2014fix.zipfile, unzip it and save the figure ftpPrefs.xml file to the following location:

  On Windows: %appdata%\Roaming\Adobe\Adobe CC\2014.0 Muse (you can type in the path bar at the top of the Windows Explorer window)

  On Mac: ~/Library/Preferences/Adobe/Adobe CC/2014.0 Muse (you can type in the dialog box go to the folder by using shift-command-G)

  Muse uses extended FTP Mode Passive (EPSV). This is the preferred mode for optimal performance, but we find that some hosts have configured FTP servers such as EPSV is not supported or EPSV only works if you are inside the firewall as well as the FTP server. The ftpPrefs.xml file that precedes, turns off EPSV mode. So if this is the problem in this case, implementation of this file should allow you to properly connect and download without errors.

• Is it possible to save the current tabs and groups so that they can be recharged at any time?

  My Firefox crashes sometimes, and when I start it up again, my groups and tabs that I had are lost, so I need to recreate my history window. Is there a way I can save the groups that I have with the tabs on the inside so that I can retrieve them at a later date.
  "I say that Firefox does not save the whenever I close the browser, so I'm güssing there a file somewhere that contains this information, if I know how is called this file I could save it on my regular schedule and retrieve them if I had to, of course the best solution would be to have a ' save the groups ' & 'Support groups' in the menu.

  Thanks in advance
  DayoJ

  (PIN) App tabs and groups of tabs (Panorama) are stored in session data in the sessionstore.js file in the Firefox profile folder.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/KB/backing+up+your+information

• How to save the table column and row headings

  I have a table where I activated the column and row headings.  Once the table is loaded with data, I would like to save the contents of the table, including the column and row headings in a text file.  The crux of "value" property returns only the content of the table, not the row and column headers.  I could use "header line chains []" and '[] column header chains' property nodes as well, but I'm in the island there is an easier way.  Looks like adding the headers of lines would be difficult.  Any ideas?

  Thanks in advance.

  Here is a way. The construction with the empty constant is to provide to the left corner of the table where there is no data.

  

• Security settings - internet Explorer automatically saves the url.s and temporary files of web pages I visit "how to fix this? or is it supposed to be defined in this way?

  my Windows 7 # 64 - a system ie #9 I downloaded 2 months Ago and now its slow way I, m ready to return to Explorer 8 #-Files to remedy this I ran a Microsoft Fix it Scan and it fixed everything except one-> he says that IE #9 records all URL, S and Temp , to all the Web Pages I Vistit is he supposed to save the Cache to make it faster, or is it wrong and how can I solve this problem... Very confused...

  All browsers do this caching.  This is to eliminate the need to keep the same things over and over again and so the download speed things up.  There are all kinds of ways to control this by clicking on the gear and then Internet options.

  Good luck.

• Brush in the new selection and Mode mask

  I used sometimes change masks of paint on shades of gray (less than 100% opacity) mask or using the brush in overlay or other modes.  Is it possible to change the opacity of the brush or mode in the new workspace selection and mask?  Thank you!

  No, the method of selection and the mask does not have these features, but you can always do with normal brushes.