Unable to save the secondary instance of ACS.

Similar Questions

• Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

  I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

  It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• Unable to save the files to my device (Flash disk)

  Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

  Thank you

  First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

  Good luck

  Free Support Tools

• Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  I get this message trying to install a Canon printer

  Jim

  A few quick questions for you:

  • What printer model
  • Have you tried uninstalling and reinstalling the printer
  • You, the drivers are up-to-date

  You can try and run the difficulty he tool and see if that solves your problem

• Unable to save the name of file in Notepad with * (asterisk)

  We are unable to save the name of file in Notepad with * (asterisk)... with this offer special symbol... why?

  I had to ask about the asterisk "" * "symbol..."

  The asterisk is also a special character that cannot be used in a file name or a folder.

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• Unable to save the document as...

  I get "Unable to save the document as" whenever I try to save or save as.  Tried to save in many different locations, file names & versions of flash.  Nothing works. Any suggestions? Thank you!

  Recording in version CS4 to CS5 seems to work.

• Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

  Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

  Hello

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

  Concerning

  Vivek

• LIBTUX_CAT:582: ERROR: unable to save, the full registry table

  When we tried to call one of our service 100 times at the same time we had an error like: -.
  
  181936.547.MLXWTAIXDEV! GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: unable to save, the full registry table
  182718.591.MLXWTAIXDEV! GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
  
  
  Can someone help us on why this error is coming.
  
  The configuration of UBB for even is like: -.
  
  MAXACCESSERS 350
  MAXSERVERS 430
  MAXSERVICES 1200
  MAXGROUPS 100
  MAXNETGROUPS 20
  MAXMACHINES 256
  MAXWSCLIENTS = 100
  MAXACLCACHE = 10
  MAXPENDINGBYTES = 100000
  
  
  'TMMETADATA '.
  SRVGRP = "M_JOLT_GRP".
  CLOPT = '- A - / dev_app/dtux5/bin/reposfile f.
  RESTART = Y
  SRVID = 1
  GRACE = 3600
  MAXGEN = 5
  
  'GWWS '.
  SRVGRP = "M_JOLT_GRP".
  CLOPT = '- A - iGWWS1'
  RESTART = Y
  SRVID = 2
  
  Wsdf file
  
  < definition
  xmlns = "http://www.bea.com/Tuxedo/WSDF/2007."
  name = "EBATEST" wsdlNamespace = "urn: salt." EBATEST.wsdl">
  < WSBinding id = "CURTEST_Binding" >
  < SOAP >
  < AccessingPoints >
  < endpoint
  address = "http://10.16.114.145:7001 / ebaapp" id = "eba_HTTP_IN" >
  < / endpoint >
  < / AccessingPoints >
  < / SOAP >
  < Servicegroup id = "ebatestGrp" >
  < name of Service = "SCD_GET_TRD_UND" > < / Service >
  < / Servicegroup >
  < / WSBinding >
  < / definition >
  
  
  And salt file used for manufacturing saltconfig
  
  < deployment xmlns = "http://www.bea.com/Tuxedo/SALTDEPLOY/2007" >
  < WSDF >
  "< import location="/dev_app/dtux5/bin/example.wsdf "> < / Import >
  < / WSDF >
  < WSGateway >
  < GWInstance id = "GWWS1" >
  < inbound >
  < link ref = "EBATEST:CURTEST_Binding" >
  < use endpoint = "eba_HTTP_IN" > < / endpoint >
  < / binding >
  < / entrants >
  Properties of <>
  < property name = "enableSOAPValidation" value = "true" / >
  < / properties >
  < / GWInstance >
  < / WSGateway >
  System <>< / system >
  < / deployment >
  
  
  
  The generated trace file is like: -.
  
  
  184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184541.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184541.722.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281396]
  184541.723.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 1 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: username: mamu2:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: Sbaw id: 281396:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: company id: B21001:
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: business msg: invalid user: ID entered is not valid
  184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: name of the Service: SVC_SESSION
  184541.727.MLXWTAIXDEV! svr_session.11043070.1.0: no data in the Session table for: mamu2:,: 281396:
  184541.728.MLXWTAIXDEV! GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
  184541.729.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184700.522.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184700.522.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184700.523.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: TIMEOUT VALUE IS [9999]:
  184700.524.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: SESSION [281397] IS VALID:
  184700.538.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184700.538.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.692.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.693.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: TIMEOUT VALUE IS [9999]:
  184707.694.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: SESSION [281397] IS VALID:
  184707.710.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.711.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.718.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: TIMEOUT VALUE IS [9999]:
  184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: SESSION [281397] IS VALID:
  184707.732.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.732.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.739.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.739.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: TIMEOUT VALUE IS [9999]:
  184707.740.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: SESSION [281397] IS VALID:
  184707.756.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.756.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.769.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
  184707.771.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: SESSION [281397] IS VALID:
  184707.798.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.799.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.807.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.807.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
  184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: SESSION [281397] IS VALID:
  184707.821.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.821.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.831.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.831.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: TIMEOUT VALUE IS [9999]:
  184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: SESSION [281397] IS VALID:
  184707.843.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.843.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.855.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: TIMEOUT VALUE IS [9999]:
  184707.857.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: SESSION [281397] IS VALID:
  184707.869.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.869.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.876.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.876.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
  184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
  184707.899.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.899.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.907.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
  184707.908.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
  184707.918.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.919.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.932.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.932.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
  184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
  184707.945.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.945.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.957.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.957.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
  184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
  184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
  184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
  184707.973.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
  184707.980.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
  184707.980.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
  
  
  Kind regards
  Anurag

  Hello

  Tuxedo documentation, LIBTUX_CAT:582 is described as follows with a recommended action.

  >
  582

  ERROR: Unable to save, the full registry table

  Description

  The BEA TUXEDO system was trying to find a location in the registry table for a process, but the registry table was full.

  Action

  Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, and then restart the application and try again.

  >

  So try increassing MAXACCESSERS and see if the problem goes away.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Unable to save the file in PSD - PS says that the file is over 2 GB when it's not

  I have a PSD that I worked on for many months. This week I got a new computer. When I open this file on my new computer, I'm unable to save as a PSD. The size of the file, in Windows Explorer, is 600 MB. Depending on the size of the PS CC Document displayed at the bottom of the Document window, the size of the document is 288.4 M / 1.77 G. Yet, when I try to save this file on my new computer, I get this error:

  Could not save it as "filename.psd" because the document is larger than 2 gigabytes.
  See Help topic "backup files" for more information.

  I do not understand how I worked on this document for several months and never had a problem with recording it, even now, on my new computer, it is impossible to save. My new computer has a secondary SSD hard drive that I use as the primary scratch disk. The new computer also has more RAM and a processor more. I had copied all my files from the old computer to the new preferences, and I do not see all of the settings are different between the two computers. Can someone please provide some guidance?

  (Note: I've been running PS CC x 32 because the x 64 version is not stable on my computer.)

  
  Size of the file as that displayed in the Windows Explorer: 600 941 KB.

  NEW: Document size such that displayed in the Document window: 288,4 M / 1.77 G
  OLD: Paper size such as displayed in the Document window: 288,4 M / 1.77 G

  NEW: Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12 / 11:23:00:00) x 32
  OLD: Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09 / 23:23:00:00) x 32

  NEW: operating system: Windows 7 64-bit
  OLD: Operating System: Windows 7 64-bit

  NEW: Version: 6.1 Service Pack 1
  OLD: Version: 6.1 Service Pack 1

  
  NEW: Physical processor count: 4
  OLD: Number of physical processor: 8

  NEW: The number of logical processors: 8

  NEW: Processor speed: 3591 MHz
  OLD: Processor speed: 2394 MHz

  NEW: Built-in memory: 32694 MB
  OLD: Built-in memory: 30718 MB

  NEW: Free memory: 25810 MB
  OLD: Free memory: 25633 MB

  NEW: Memory available to Photoshop: 3255 MB
  OLD: Memory available to Photoshop: 3255 MB

  NEW: The memory used by Photoshop: 60%
  OLD: The memory used by Photoshop: 69%

  NEW: Image tile size: 128K
  OLD: Image tile size: 128K

  NEW: Image cache levels: 6
  OLD: Image cache levels: 6

  NEW: Scratch or volumes:
  C:\, 930.2 G, 686,5 free G
  B:\, 111.8 G, 103.6 G free
  OLD: Scratch or volumes:
  C:\, 930.7 G, 567,1 free G

  Hello

  To ensure the follow-up to future readers who find this post, indeed it was a 14.2 bug fix which fell from Mindy file.

  14.1.2 and older versions of Photoshop, it was possible to save a document in PSD format which would not properly push the limit of 2 GB of formats (vector data stuck with the Max compatibility). We had a report of someone who inadvertently produced 300 + GB of files (http://forums.adobe.com/message/5666971#5666971). With 14.2, now make us some additional controls while recording and to issue warning limit file size. One of these controls is to the pixel dimensions of the data (the data of superior image then 30K pixels).

  Although MIndy file na not to exceed the 2 GB limit, it triggers the check of size of pixel data. There is a smart object layer that put across 6000%.

  So if you are getting 2 GB limit warning and didn't in previous versions, take a look at the scale of values on smart object layers and note the layers covering the area pixel values in the Info Panel and checking vector data (pasted from Illustrator guides).

  Kind regards

  Steve

• HP ENVY 4520 all-in-one: unable to save the new printer

  To register, the first thing required is a model #, & when I get mine, the answer comes back - 0 results found. I can go no further, until they recognize the printer they sold to me.

  Hi @elebit,

  Welcome to the HP Forums!

  I noticed that you are unable to save your new printer HP ENVY 4520. I am pleased to see that for you!

  Please, take a look at the Plug, for this printer. Who have the exact model number and try to save again.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this helps!

• Unable to save the files on the desktop computer.

  After a restoration of the system, I am unable to save files on the desktop. Also, when I run that h & R Block software from my office, I get the following error

  "No permission to write to the directory. (see WinFileWriterImpl:open())

  No idea how I can fix this problem?

  Thanks in advance

  Why do you run the system restore?
  You had a problem before with saving files?

  You can save files to a folder on C:\?
  There are errors in the event viewer?

  Note

  To open Event Viewer: click on the Start button. In the search box, type and then event viewer from the list of results, double-click Event Viewer.

  Search in the application or system event logs and red error report.

  Thank you

  Marilyn

• Unable to save the game Batman Arkham City in Windows live.

  Original title: problem of batman arkham city-gfwl

  I use windows xp sp3 as my OS.

  City of arkham batman installed a few months ago... everything was perfect and I started to play, but I wasn't able to save the game and then...
  No sign of windows don't live id it...
  Even if I created a windows Live ID, I'm unable to access to "microsoft games for windows live" to save the game...
  I have to update my OS? Or install windows 7?
  HELP NEEDED...

  Hello

  I suggest you to post your query on the forum mentioned below:
  http://community.batmanarkhamcity.com/forums/

  Also you can post your query on the forum link mentioned here:
  Games for Windows LIVE game support
  http://support.Xbox.com/en-us/Games/PC-games/game-support

  Hope this information is useful.