saved in the batch (javascript)

Similar Questions

• Cannot be saved in the Destination folder with the Batch command

  I am trying to save images for the web with a batch command.

  It seems that they are saved in the original folder used when creating the action.

  The destination folder, I chose in the command batch window is not written in.

  Is there a cure for this?

  Start your action recording and do all the steps you would if editing an image (in addition to open; open is done by the batch script). Thus, for example: resize your image; convert to profile (sRGB); Save as (using the short keys Ctrl + Alt + S (win) or Cmd + Opt + S (mac)); Close (Ctrl + W or Cmd + F). Save As has been used, economy will be like a copy. Well, which means that when you close it you will be asked whether to save the original - select 'no '. Now, you have completed the Action then finalize by stop recording. Every bit of this info will be published in the Action.

  Now give her another chance.

• JavaScript in the batch sequence

  I made some Acrobat scripting but especially by VB and I'm able to write what I need, but I want it as part of Acrobat to my operator instead of the separate program. That said, I want to write a Java script that I can include in the batch sequence.

  I need to add a page at the beginning of a document and I want to have this page be nubered 'a' without disturbing the numbering else where in the file. By simply adding the page initially with the batch sequence, it adopts the numbering of the first page. So, if the first page is numbered as 'i', then the new inserted page is numbered "i" and the rest of numbering of the changes, what was I becomes ii, which was ii becomes iii and so on. I am capable of this VB script by adding the page to the end, renumber them using the SetPageLabels of a Javascript object, then move the page initially.

  Is there a documentation on the use of Javascript in a sequence of batch processing?

  Thank you

  Ken

  You specify not valid values in the parameter aLabel. The first value should be "D", if you want to use the decimal numbering.

• The batch a multi page pdf to png

  Hello

  I need lot 58 mulit page pdf format which must be opened in photoshop, resized and then saved to the web as a bit of format png-24.

  I have set up an action to do the above and ran a lot on it, but for some reason any that it doesn't seem to work for me.

  When I ran the batch that's what I chose:
  Game: The default Actions
  Action: The defined action that I put for above

  Source: is a file with the PDF inside
  -J' have override action "open" commands selected

  I did it too when they are disabled, but the only open lot 58 pages... don't apply the action.

  Destination: folder I chose

  Have the value of file naming:

  Document name + extension + startup series #1

  So I don't know exactly where I'm wrong

  Someone at - he a clue on how should I do for this?

  Thank you!

  A better solution would be to use the PDF processor script.

  The script should work in cs2 - cs5. (the one at the bottom of page)

  http://PS-scripts.com/BB/viewtopic.php?f=10&t=1882&SID=a56f92e435b9f9cdb63d7f73dd8e56e0

  MTSTUNER

• How to return multiple images using the batch command

  With the help of Fireworks 8.
  
  I have a document with more than 200 executives. In the "Command"-> "Batch commands" menu I have the possibility of rotation and or multiple or individual images blur.
  
  What I would really like to do is to return all 200 images horizontally, but there is no option to do this at the same time.
  
  Or is it?
  
  Tell me that I'm not stuck with the only option of failover each picture individually.
  
  I have knocked down an image and recorded my actions as a command, but this "Flip" command could not be applied to several frames.
  
  Help out me.
  
  Thanx.

  You will need to use the feature to peel the onion of the Panel frames, as
  Alex said.

  Go to the control panel frames. Assign to all managers of onion (the box on the)
  left side of each image - click on the Executive in the area of skin of onion,
  Then click on the lower frame. You will see a line connecting all the
  frames) then click and drag on your entire canvas area to select all
  executives. If you have saved the command, you will find at the bottom of
  the menu of commands.

  This does not work, I just did.

  --
  Jim Babbage-. : Community MX:. &. : Adobe Community Expert:.
  Extend the knowledge, every day
  http://www.communityMX.com/
  CommunityMX - free resources:
  http://www.communitymx.com/free.cfm
  ---
  . : Fireworks adobe community expert:.
  News://forums.Macromedia.com/Macromedia.Fireworks
  News://forums.Macromedia.com/Macromedia.Dreamweaver

  CashComm wrote:
  >

  Quote:
  EDIT > TRANSFORM > FLIP HORIZONTAL. Do it once, then go to history
  > Panel and save a command customized. You have access to the
  > batch operations.
  > However this will affect only the first image of the top layer unless
  > other images or layers are selected manually.
  >

  
  > Thanks for your response Jim. I did everything as you described. I chose fram 1,.
  > so I chose the layer in the fram in the layers panel. I spilled usig
  > CHANGE it, TRANSFORM menu. In the history panel, I saved this command as
  > "FLIP".
  > I have selected 2-10 images, hold down the SHIFT key. Then I went to the
  > Menu command and selected my "FLIP" command and received an error message telling me "
  > that it could not apply.
  > I tried to find out where my Flip order is registered thinking that I'm going in
  > Explorer and drag it to the folder of command Batch that I could use it. But I have
  > could not find my FLIP order, even if it works perfectly if I'm changing
  > fram one at a time and only then if I select the layer in this context first.
  >
  > Apparently recorded commands do not work on several images.
  >
  > So I'm in a situation where I have to use the flip command or CHANGE-->
  > TRANSFORM caraa command on each fram individually.
  >
  > It's frustrating.
  >
  

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• How can ensure me that my iphone contacts are saved in the cloud and is not a crucial step if I buy a new iphone.  I have 5

  How can ensure me that my iphone contacts are saved in the cloud and is not a crucial step if I buy a new iphone.  I have 5

  Help here > transfer content from your old iOS device to your new iPhone, iPad, or iPod touch - Apple Support

• Half of my Word document disappeared.  How can I find the history of the document so I can revert to a saved version the earlier?

  Half of my Word document disappeared while I was working on it.  I tried to use the back arrow to recover, but Word is closed.  How can I find the history of the document so I can revert to a saved version the earlier?

  I hope that you have a Time Machine backup that you can use to revert to a previous version.  If it is then maybe you shared the document with someone else by e-mail and get get an old copy of your sent e-mail.

• Emails sent via Thunderbird are not saved on the e-mail server.

  I have a critical problem with the backup of the emails I sent to Thunderbird.

  The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

  I would be grateful if someone could
  (i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
  (ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

  Thank you much for the help.
  L

  The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

  With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

  To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
  https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

  so whenever I have to reinstall the software, I lose all my outgoing emails.

  You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
  With pop, all mail is local to your computer, including the "sent" folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

  In fact, you must back up the entire profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

  As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
  http://KB.mozillazine.org/Move_to_a_new_PC

  do I have to save the "Sent.msf" file as well?

  If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
  In any case, to save the entire profile is the recommended method.

• When can I remove photos from the iPhone by making sure they are saved in the cloud?

  When I can I free up space on my iPhone 6, deletion of photos/videos, ensure that they are saved in the cloud?
  When I buy more space on the cloud, it is to iCloud, iCloud Drive, iCloud photo library?
  Too confusing...

  iCloud is a synchronization service, not off of storage of the unit. That means that it is not designed to "free space" on your phone by moving your photos and videos to iCloud. All photos will remain synchronized between your phone and iCloud.

  You can select the feature to OPTIMIZE, significantly reduce the space that take your photos on your phone.

  When you upgrade your iCloud space, it's for all features in iCloud, as backup space, iCloud disk space and so on.

  If you really want the maximum space on your phone, you can import your pictures and videos on a PC and then delete them from your phone. It does use icloud photo library.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• How can I access the Advanced Javascript settings?

  I am aware that, in recent versions of Firefox, the ability to disable Javascript has been deleted. I don't intend to reopen the discussion of that particular decision. But removing this option also removed access to the menu Javascript Advanced settings, which was much more useful than just disable Javascript itself. For example, although rarely, I have disabled Javascript entirely (other than at my own site of debugging), I disabled systematically the ability of Web sites to disable context menus or move and resize popup windows.

  Unlike turning off Javascript altogether, these are the settings that provide a positive benefit for the 'ordinary' (non-developer) users. If, say, I want to open a link in a new tab, then the correct way to do this is right-click on it. Sites which disable the right-click degrade the user experience and to allow a way to replace it is a good thing. What is the justification for removing the ability to disable Javascript entirely (and I don't understand, even if I don't agree with him), I see no reason to remove access to these advanced settings.

  So my question is, how do I re-enable javascript access produce settings? I don't see any obvious setting for her in: config and simply disable javascript entirely through this method is not what I want to do.

  I have a post that lists the three corresponding about: config preferences here: https://support.mozilla.org/en-US/questions/967108#answer-464407

• The batch change date and time

  I have a lot of photos which, for some reason, have lost their correct dates and hours of creation, so I was eager to correct in an easy and enjoyable way.  I unfortunately discovered that Photos is not the batch option to change that used to be in iPhoto.

  When you try to find a solution to my problem, I fell on this batch Change Date and time on a fixed Date, which works well, but not quite how I want it.  What I want to do, that's exactly what the script above does, but rather than increment by 1 minute of each photo, I want to increment by 1 second intervals by photo.

  Having not really used AppleScript before, I tried to change the references to the 'minutes' to 'seconds' but that did not work.  Is it possible to do using above seconds instead of minutes?

  Any guidance would be greatly appreciated.  Thank you.

  Just delete the text "" * minutes ' in the lines where the date is changed. "

  Then time will be incremented seconds.

  For example, for the first version of the script use:

  the value timeIncrement to 1 - increment of time in seconds

  (* select at least 2 images in Photos *)

  say application 'Photos '.

  activate

  game imageSel for (get selection)

  if ({ is } imageSel) or (the length of imageSel < 2) then

  error "Please select at least two images."

  on the other

  defined first_image to the point 1 of the imageSel

  the value first_date to (the date of first_image) as date of

  Repeat with I from 2 to the County of imageSel

  put next_image to the point I of imageSel

  the value next_date to (the date of next_image) as date of

  the value time_difference to (first_date - next_date) + ((i-1) * timeIncrement)

  say next_image

  the value le Date of next_image to (next_date + time_difference) as date of

  end say

  end Repeat

  end if

  return "Set the date and time of" & (the length of the imageSel) & 'photos. The last date is "& ((the date of next_image) as date)"

  end say

  
  

• Photostream photos are automatically saved in the pictures on Mac/El Capitan

  I've used IOS for iPad, buy one of the Macbook Pro last fall (and actually use Lightroom and PS for photos) but want to keep a few photos in Photos on Mac.  I have no problem with the photo stream on iPad (recently - Pro) - I can pull some with 6sPlus of the iPhone, the photos appear in the photo gallery on iPad and I select and save image on film on iPad and remove it from the photo gallery.  I have iCloud library checked on any device, so I chose that the pictures are saved on this device.  I found that all my photos in Photostream seem to be saved all the pictures on the Mac.  Otherwise it seems intuitive to me unlike IOS - and I realize that the OSx does not necessarily the same as IOS.

  So my question is - without going through the 'copy Photos imports' checked, make pictures just automatically add to the Photos in the photo gallery?  If so, doesn't make much sense.

  To test this, I took several pictures on the iPhone, waited until they were downloaded in PHotostream then I select the photo, add to an album (album test) and then delete the Photostream photo - and sometimes it deletes the album and sometimes not.  So - I want to know how you make sure that the photo is in fact on the Mac and not only in the photo gallery.

  Yes on the Mac if MyPhotoStream is on all imported pictures are uploaded to MPS and pictures from other devices o = in MPS are imported to the Mac

  My photo FAQ - Apple Support stream

  LM

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.

• Files saved in the memory

  All my files appear to be save the evaluator of computer as the hardrive memory
  What can I do to save on the hard drive?

  A strange question. Can you please explain to us how you mean exactly and why do you believe that the files are saved in the memory only? What are you doing exactly?

  I mean if you want to copy some files or saved on the HARD drive you can set the destination using Windows Explorer.