saving a file

Similar Questions

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• a 16 bit saved TIFF file does not work in ImageJ

  Hello

  I have a camera that records a 12-bit TIFF file.  When I have a saved TIFF file, it can be opened in ImageJ and all pixel values are preserved.  Also, if I display in Labview using IMAQ, it can be displayed properly and if I use ImageToArray, all values are correct too.  However, if I save it in a new file using written IMAQ 2 file, the saved file can be loaded in Labview with the correct pixel values, however, if I open this file saved in ImageJ, all the values are converted to 16 - bit wrongly.  For example, the value 62 (00111110) becomes 1000000000111110.  Apparently, the first figure when converted to 16-bit, it designates the first bit to 1 instead of 0.  I'm confused because the same saved when the image loaded into labview vi, the value is 62.

  Is it possible to fix it?  Could this be a problem with ImageJ instead of labview? I joined the original file and save the file here.

  Greetings, Charles;

  After looking at the attached screenshot, I have a question for you. Which is currently connected to the IMAQ Create for Source2? I guess it is an enumeration with I16 selected, correct?

  The same thing happens if you use U16 times on LabVIEW and ImageJ, or any lower bit depth? Finally, if you save the image to a different file format, you get similar behavior?

  Best regards;

  Simon P.

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• Recently, some of my saved Word files have changed to DOCX

  original title: Word files saved as DOCX

  Recently some of my saved Word files have changed to DOCX, this is random. When I type a new Word document, it is stored as a DOCX file. How can I fix? My operating system is windows 7 and the 10 Word version.

  Add to what is already said, if you want to make permanent change (that is, all files saved as .doc), then click on (top left of the word) Office button and choose Word Options--> Recording tab and put "save files in this format...". "as a result.

• How know default ACM in my PC put in correspondence with another Podcast software for saving the file

  Hello

  I have a problem with the Windows ACM codecs as follows:

  I had bought a podcasting software and used perfectly for 1 year.  Now I can't use it to save the recorded files. I reported the error to this company for help. They asked me to download a tester and submit a report of my information system. Then, they advised me to download a LAME encoder file to add in the current software, but it does not help that the problem persists.  I found that when saving the file, the codecs of Windows ACM Deault I used to save before recorded files is not available.

  So please advise something wrong in my Windows Media Player and that I need to do to fix?

  Very much appreciated.

  Phan Phuong

  Phan chk this

  http://www.Microsoft.com/WinME/0506/24231/technet_fy06.XML

  or bing it

  http://www.bing.com/search?q=podcast+software+for+TechNet&form=IE8SRC

• I can't see or access my saved PDF files (or icons) in my files or on my desktop of 64-bit windows 7 (catalyst control problem?).

  The only time where I can see them is when I'm about to save an another PDF to a file or to the desktop during 'save process' in which it contains some saved PDF files.

  I tried 'show desktop' and opening adobe reader to see the files or icons, but they will not show.

  I have a new HP computer with windows 7 64-bit and windows has failed twice. Time just after the new facility, just before I was able to create the rescue and then disk after two weeks of use; telling me to re - install! Now, months later, I have Catalyst Control Center errors / problems. So I don't know if it's all the partners. Should I reinstall windows and hope my rescue disc work?

  Maybe I should have asked "how to get a free replacement for a windows 7 lemon?

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  Method 1:

   

  I suggest you to search for the problem in safe mode and see if it persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest to change the save location and check if it helps.

  Method 3:

  I suggest you run Chkdsk and see if it works.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: Make sure that you take a backup of your data before performing the check disk on your computer.

  Method 4:

  I also suggest you to check user account again and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Smartphones blackBerry how to open a saved .ipd file

  How open a saved .ipd file I saved my Blackberry to?  I washed my phone a few days ago and can not get to start over.  I was hoping to get at least a part of my Planner printed using this file.

  You can use the Fund Manager to restore the data in your BB

  http://BTSC.webapps.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB10339

  or if you want to display the data, you can use the magicberry ipd Editor:

  http://download.CNET.com/MagicBerry-BlackBerry-IPD-editor-and-converter/3000-10743_4-10962130.html

• opening a saved wordpad file

  In general, I save URLs I want to send an e-mail or mailed later to a wordpad file.  Now, I can't open any saved wordpad file.  When I click on the file, I get an error message telling me Word cannot open Starter.  (I never bought MS Office, so I did not Word).  Whenever I open a wordpad file before, Word Starter has not started.  Any thoughts?

  You could go to start / program by default and default Wordpad program or buy Microsoft Office.

  You can download Open Office (free) and use it, you will need to go into the settings and tell it to save files in Microsoft format or modify every file in record under, files of type.

• Cannot access my C drive whn saving quicken files

  Windows 7 Home Premium operating system.

  Initially, I couldn't access the C drive because I got the message that I need administrator privileges.  I found the answer to fix this problem, but when I try to save my quicken, data files for the quicken directory, I get the message, "there is no such thing as c:\program Quicken, you want to create?  When I click Yes I get a message "Please enter a valid directory."  I type in C:\program files\quicken\qdata12.qdf-backup command line.

  There are two folders Program Files under Windows 7.  The second is Program Files (x 86) quicken where was installed.  I tried to type C:\Program Files (x86)\quicken\qdata12.qdf-backup and get the message cannot access the C: drive.) Please make sure the disc is ready, and the disk is not write protected.

  I never had this problem on my other computer that is running Windows XP Home Edition SP3.

  No, it isn't a problem with Quicken.  By a previous answer, the problem is Windows 7 Home Premium 64 bit running.  It does not allow access to the Quicken directory as was the case of all other versions of windows and quicken which I've used since 1991.

  In Windows 7 Quicken is installed in C:\Program Files (x 86) \Quicken. Is the path of the file for saving my file qdata12.qdf: C:\Users\myusername\AppData, because that Win 7 protects the program files.

  RCWhite thanks for the answer.

• Problem: Opening loss of saved job file in Illustrator

  I have a computer that deals the Illustrator oddly. My student records his file, he shut up and quit unexpectedly on Illustrator. The next day, back in the classroom, she opens his folder and is absent from work since the day before. What happened to 4 - 5 times this year. It's happened on other computers as well, but students may have screwed up. This student's attention and I'm starting to think that there might be a glitch in Illustrator.

  We are working on the iMac with Yosemite and the latest version of Illustrator CC

  I worked with Illustrator since 1988 on a daily basis. The few times where that has happened was the operator error of savings under the same name of file to another folder and once was a problem of the server (using a mac on a windows server) cache and the file showed correct within a few hours. Servers are a lot better now and if you waited 24 hours and the file appeared correct then you know you have a rare server problem (the distribution and duplication of the RAID were to catch up).

  If you had to open the file and the layers have been flattened and embedded images, it is a technical problem that opens the .pdf half the file rather than half when registering with pdf compatible with .ai.

  I can understand how someone who takes care of that you would trust their file management skills more than other students, I don't know any of them so am impartial. Rather than seeking a glitch in Illustrator, I recommend that you search the problem completely. Not to incriminate a student, but to show them the steps you would take in the professional world.

  1. Search the entire disk, server, shuttles USB drive connected to the same or similar file name.
  2. Check the file modification date against when the student says that they have saved the file. Make sure they know all about this region.
     
  3. Check the server the day following the date of modification, and if the contents of the file have changed.
  4. Teach students effective world real file naming conventions, so who have backups incase their file is corrupted or power failure. Most of the agencies only have to register with a 01 to the and increments for each revision, dragging old versions in a folder named previous or similar.

  The printing industry is very competitive and saturated. Giving students of file management and troubleshooting skills are essential to their ability to find a job in this industry.

  Feel free to come back, but please provide some screenshots or variables to use, than without and the facts will be difficult to help you know what is happening.

  Have faith well, Illustrator is not perfect, but save and do not open with updates files are very rare and I find a positive attitude and cool head is important to have.

• I have a script that ended up saving a file under a new name whenever I generate the script.

  I have a script that ended up saving a file under a new name whenever I generate the script on the same image.

  Moving to Scripting Photoshop

• Hello, I have a major concern, indeed saving my file, all those who exceed lost in the background becomes white and therefore the size of my file changes. What should I do?

  Hello, I have a major concern, indeed saving my file, all who are lost in the background becomes white and therefore the size of my file change (I said that I have create menu UN pour un client, so he must put this file in a usb key to display it on his TV). What should I do?

  What file format do you export?

  In the case there is the possibility of "Clip for work plan" or "Use the work plan", check that.

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• Why when saving a file already existing AI cs6 is acting like I am registering for the first time?

  Why when saving a file already existing AI cs6 is acting like I am registering for the first time? Assume that the file is called file.ai - when I'm working on that and go: Cmmand record - he said: ' replace file1.ai? I don't want to replace - simply record. What happens to me every few weeks in artificial intelligence. And it is a file that was NOT an older file - as I posted this Q once first before - and got no answer. Someone suggested that it might be that my file was from an older file. But no - this file is completely new. Work on it for a few days. Thank you very much!

  Applications > utilities > disk utility > repair permissions

• Inconsistency of saturation according to the Treaty and saved the file.

  I have PSE12 and CS5.  When I adjust an image in two I can achieve a level of Nice saturation however when I view the image you saved my file to the computer, the saturation is very much exaggerated. That is what it is? What other version see if I enter a contest?

  OK, that's as I thought, a range wide screen.

  It is normal and just how to work these units. Applications without full color just not usable management and trust - they display saturated and there is nothing you can do. It's just the case that you agree implicitly when you buy a model from the range.

  Always use fully managed color requests if there is (like most Adobe applications). They will display correctly, as long as you have a valid monitor for these applications to use profile.

  It also means you need to calibrate and profile the unit with a stallion. If you use the generic Dell profile that installed from the CD that is not very reliable. As far as I know you can download the software of calibration of Dell, but you still need a screen i1 sensor to go with it.

  Working with a range of large screen is no problem at all, as long as you are aware of the implications and use accordingly.