Similar Questions

• Amount of saved contacts blackBerry Smartphones

  Please help me: How do I know the amount of contacts stored in my BB Torch 9800? Seems that they are different from the saved in Outlook. In fact, I was not able to match the two of them. I am retired from my company and myself.

  Look at the Options > device > Service status.

  On this screen, press the Menu key > database sizes and you'll scroll through address book and numbers to the right will be the number of contacts in your address book.

  So, what is the difference in your BlackBerry contacts and those in Outlook? How much is not synchronization more?

• BlackBerry smartphones can not find any application that opens saved contacts

  I backed up my contacts from blackberry "BOLD" from my mac. They are saved in the folder my documents, although when I try to open the file I get an error message saying that I don't have an app to open the file. When I try to find an application to open the file such as Word doc, I got another message tells me that the file is corrupted and cannot be opened. What can I do to make sure that the contacts on the phone are actually in my mac?

  Yes, it's a backup file, in its own format, not something that you can open in your Mac. It is for the restoration of your contacts to your BlackBerry.

  If you want to view your contacts on the Mac, you have to 'sync' of your contact data to some Mac Organizer app like Entourage.

• BlackBerry smartphones, I don't see the name of the saved contacts

  
  

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.

  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.

  • In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.

  • For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.

  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• How to transfer contacts from iphone 5 sec to 6 sec without restoring backups?

  I have iphone 5s which has 1800 more contacts, (icloud + google contacts). now I have another iphone 6s I planed to use with iphone 5s together.

  I installed my iphone 6s as a new iphone and use the same apple ID, now the problem is when two phones Internet access incoming calls received on two phones at a time, and a second my all contacts are not displayed in new iphone 6 s 320 icloud saved contacts out of 1800 are the shows What to do I can use two iphones.

  For simultaneous calls

  Settings - phone - calls on other devices - OFF toggle

  With regard to contacts - one option is to import your contacts into Outlook or Gmail and then set that upward on the new phone - contacts will come with the e-mail account

  Another option

  Use a free application like FullContact

  FullContact - synchronize, manage and back up Contacts with multiple devices

  https://iTunes.Apple.com/us/app/fullcontact-sync-manage-backup/id579616837?Mt=8

• When is it safe to delete Contacts from "on my Mac"?

  Earlier today, I discovered that I had a lot of contacts (more than 100) that have been "on my Mac", rather than in the cloud. I have no idea why these contacts have been added on my Mac, rather than directly to the cloud. I tried to add a new contact, and it has been added to iCloud and on my Mac.

  I believe that all new contacts have been added to Apple Mail. I guess I got on my Mac, selected in the Contacts. I have now selected iCloud and it seems to work as I want it.

  I think delete all my contacts on my Mac so that if someone gets added here by mistake, they will stand out.

  I have my saved contacts. Is there a risk to the removal of all contacts on my Mac?

  If you have a back up and you are sure you have a back up then a massive deletion is no problem, but you should spend 15 minutes through the contacts on my Mac one and really confirm you are remove the useless and be the guardians of the past to iCloud.

• problem Manager p1a42 vibe p1 Contact save contacts in Arabic

  I am facing some problems with the contract manager
  1. when to use sim card to save contacts in Arabic only except 8 figures, workes .it smoothly until the first reboot then contact show that 8 Arabic numerals
  2 numbers are dublicted in a single contact
  3. very slow in the call log to update of last call
  4. the search option carried over from their efforts to limit the search looking for spasfic counts o all accounts, - contacts for search-

  Note from the admin; edited to be more descriptive subject

  After the update contacts don't open details if less 500m.b of ram
  When I open the contact it showing white screen
  Call log still takes time to think about the last call
  Saved contacts a delay to appear in future calls
  All contacts a dublicted he numbers auto

• Z10 blackBerry not recognized in text messaging contacts

  I noticed that when I receive text messages on my Z10, my saved contacts are not recognized. the sender comes in the form of number with the prefix of the country. However when I tried to save my numbers of contacts with the country code, when I recievce calls, they come there in the form of numbers and not the name of the person/people.

  I have a way around this problem.

  I just saved my 2This contact numbers. Since I was the opiton to save more than one number, I save the number with and witoout the prefix of the country. so now, I can see touch when I get SMS and calls.

  swill Thi do until the issue is reolved by blackberry. It is KB33685

• Add Contact OS10

  Published by oros: moved blocks of code to code for readablity.

   

  At the following example of the API doc

  function onSaveSuccess(contact)
   {
      //console.log("Contact with id=" + contact.id + " is saved!");
      alert("Contact with id=" + contact.id + " is saved!");
   }
  
  function onSaveError(error) {
     // console.log("Error saving contact: " + error.code);
  
     alert("Error saving contact: " + error.code);
  }
  
  function createContact() {
      var contacts = blackberry.pim.contacts,
          ContactField = contacts.ContactField,
          name = {},
          workPhone = { type: ContactField.WORK, value: "0046856400500" },
          workEmail = { type: ContactField.WORK, value: "[email protected]" },
          homeEmail = { type: ContactField.HOME, value: "[email protected]" },
          contact;
  
      name.familyName = "Engelbrecht";
      name.givenName = "Ingvar";
      contact = contacts.create({
           "displayName": "ingvar_e",
           "name": name,
           "phoneNumbers": [workPhone],
           "emails": [workEmail, homeEmail]
      });
      contact.save(onSaveSuccess, onSaveError);
  }
  

  added to the config

      
  
      
          read_geolocation
          access_shared
          access_pimdomain_contacts
      
  

  received the message:

  Eception type error: cannot read property 'contact' undefined

  additional

  When I first studied for more information, I ended on the next page, which contained no information at all, but that looked exactly like the normal API documentation. Please delete!

  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.PIM.contact.html

  This problem happens on the device or in the ripple? If the ripple, please note that blackberry.pim is not actually set / available here.

  BB10 Documentation: https://developer.blackberry.com/html5/apis/blackberry.pim.contacts.contact.html

  EDIT: Note that your link to documentation is BBOS PIM API: https://developer.blackberry.com/html5/apis/blackberry.pim.contact.html

  You need to test a physical Simulator / device. If it's not training, if you run the following three lines of code before the identified error line, can you please confirm the exit?

  console.log(blackberry);
  console.log(blackberry.pim);
  console.log(blackberry.pim.contacts);
  

  I expect that you will get:

  (1) an object.

  (2) undefind.

  (3) the thrown error simliar to the original.

  If this is the case, the question will be how the API is included (and I have a few additional questions.)

• not compatible with incredimail how to get saved emails Windows8

  Windows8 updated but cannot get my old emails that I recorded on my Incredimail account.  How can I get my old information (saved, contacts, emails) on Incredimail turn it on for Windows 8?

  Hello
  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you are not able to get your old emails that I have saved on the account to Incredimail.

  In order to help you better, please provide us with the following information:

  (1) do you have configured Incredimail account to the Mail application?

  IncrediMail is compatible with windows 8, please refer to this link:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=incredimail&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Check from your emails on the Internet and see if you can find all the old information like contacts and emails.

  I ask that post you your query on the Forums of Incredimail:

  Refer to this link:
  http://forums.IncrediMail.com/viewtopic.php?f=7&t=8408&start=0

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• BlackBerry Leap Leap not ringing or vibration after 10.3.2

  No ring or vibrate all other sounds are very well all help result even profiles!

  everything that was tried all... do you have a security wipe (because all the already saved contacts the Exchange if no backups) quickly turned off auto update after and everything is ok.

• BlackBerry Smartphones that jump BBLink password?

  Hello

  So far, I used a BB Z10 and saved contacts etcetera with BB link installed on the PC (Win7).

  Now received a BB bond and plugged into link BB to transfer contacts.

  When Leap connecting via USB to BB link a password is requested. Now, I stopped after the third attempt (of only five possible!) and ask for help:

  Which security password is necessary? Section of the business or the private party or what else, because I know it is not the BB ID? Do not want to exclude typo so far, but you must know the password on target before burning the last two attempts.

  Thank you very much in advance to!

  HD

  What password is requested? It's either the BlackBerry ID password (and also user name) or password locking device (only the password, no user name).

  Whatever it is, you will need the locking password (if in use) and the powers of BlackBerry ID (username and password) that are used on the Z10. In addition, if you restore a backup to the jump, you must use the same BlackBerry ID... It's the BlackBerry ID on the jump may be different.

• Windows live mail file location, backup,

  I need to reinstall windows 7 and I need be sure that I get my emails from windows live mail and saved contacts client.   I can't find the location of the file to copy to an external source.

  Where can I find the e-mail files and contacts?

  What is the best way to save and import when I set up the reinstallation?

  If you want to back up all aspects of Windows Live Mail, including settings of the account, rules, etc. use this third-party utility:

   

  http://www.StaticBackup.com/Windows-Live-Mail-Backup/

   

  It does not transfer the contacts, but you can easily re - sync those if you used the option to connect to Windows Live Mail.

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "gunnu42" wrote in the new message: * e-mail address is removed from the privacy... *

  Thank you, I remember trying to use this program, the last time. its impossible to understand unless you're super irritable and I ended up finding hostage and not be able to use it.

  Gary van, Microsoft MVP (Mail)

• In bulk subscribe you to the secure area?

  I have a few hundred users registered on a site already in the CRM and I want to create a new free secure space for only registered users.  It's easy for new users, such as the registration form can automatically add the new safe zone.  But is there a way to to bulk follow those who have previously applied?  Will be a pain to go and manage subscriptions individually.  Thank you very much.

  HI Mel,

  Have you tried to generate a report of these saved contacts customer and subscription then results in the new "free zone"?

  

  It would be the only possible workaround solution I can think outside of the application manually individually.

  Kind regards

  -Sidney

• Mass emails to customers

  Hi guys,.

  What is the best way to send notifications of system change or web to all registered customers.

  I took a look at e-mail marketing, but don't believe that it would provide the right solution (subscription to a newsletter / opt-in etc.)

  It is more a process of Directors, so I would like to know how you would do that? -any suggestions?

  Hello

  Only way I see is to create an email campaign to all your saved contacts (update notification).

  You can produce a list of all saved contacts then have to do to move the Group of contacts in a mailing list.  Next, you create the notification e-mail campaign to send to these specific contacts.

  Kind regards

  -Sidney