Saving data [need dot]
Hi all
Inside of my VI (I'm the machine with LIBRARY CALL FUNCTION. data acquisition after that I table of Index for trying to channel and after that I use "fractional number string" so I can "Concatenate" string and write to the file) I save my data in. TXT file. The problem is that the recorded data are in form:
-0,021362
-0,022278
but I need:
-0.021362
-0.022278
So is there any parameter to define the record of data with point and not the comma?
You do not have context-sensitive help on? Do that and read the help for the function of fractional channel number. Read what all the entries are and what they do.
Tags: NI Software
Similar Questions
-
I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore
Do you still have the MBP? If so you can manually copy and paste the files you need.
If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.
-
First fall of 12 elements, all saved data lost on a new project.
I was working on a short project that had many video and audio clips. About 3 hours in the first project elements 12 crashed. Now, it will not open the saved data. He simply said "an unknown error has occurred during the opening of the project" Am I GROUND? What should I expect as a regular from Adobe? More importantly, is there a method to recover the project? I am a new user of Adobe Elements and video editing in general.
Thank you
Jordan M-
jordanmoorman84
Thanks for the update and glad you are moving in your project of first Elements. But...
Remember... you use first items 12/12.1 on Windows 7 32-bit. Under this condition, first elements 12 or 12.1 runs as an application 32 bit with all the limitations of a 32-bit system, namely maximum supported installed RAM = 4 GB which usually 3.2 to 3.0 GB or less available. This has major implications related to the chance for the greater realization of a project. First 12 elements is a 64-bit application in Windows ONLY when it is run on Windows 7, 8 or 8.1 64-bit. Under this condition, first 12 elements can take advantage of the 64-bit like application resources for these most important project at a greater frequency of success.
Initially, you said that you were able to complete with success similar to the problem project projects under the existing conditions. At any time you mention no memory low message.
The difficulty that seems to work for you involves virtual memory not physical memory (RAM). Virtual memory is disk space allocated for purposes of memory. In view of recent developments, it would seem that the real difficulty for you is to install your first items 12/12.1 on Windows 7 64 bit with about 8 GB installed RAM. I'll go in a further analysis of virtual and physical memory and the/3 GB switch if necessary.
Nice that you found a way forward in your projects (this is fine), please review and consider the foregoing.
RTA
-
Problem of saving data on the form
Hello
In my ranks on dataform that I try to save the data for a member and it dosent record. There are three levels for the Member
A-> level 2
B > level 1
C > Level0
I chose A on the form IDescendants, and if I save data on members C it common record. However when I select only C in the selection of members on dataform data is saved.
The only thing that comes to mind is that Member C is implicit sharing member (as a member of level 0) and A, B and C all three stored property outline.
Should I choose member B like never share and select Idescendants would be saved data?
Please help its urgent!
Thank you in advanceThen, it is almost certainly a problem of implicit sharing.
-
Saving data in the database Access by using VB 2010. Need of lots of codes
I created a database using Microsoft access file for my Application created using VB 2010. then it was installing on another computer, it displays an error saving file. I need complete codes for data stored in the database.
Error message:
unhandled exception has occurred in your application.if you click continue.the application will ignore this error and attempt to continue. If you click on leave. the application immediately quits the operation should use an update query.Details of Error Msg:
See the end of this message for details on the call
just-in-time (JIT) debugging instead of this dialog box.The exception text *.
System.Data.OleDb.OleDbException (0x80004005): Operation must use an update query.
to Material_Searching_System.MATERIAL_DATASHEETDataSetTableAdapters.TableAdapterManager.UpdateAll (dataSet MATERIAL_DATASHEETDataSet) in C:\Users\Sanjeewa Dissanayake\Desktop\kk\Material System\Material research System\MATERIAL_DATASHEETDataSet.Designer.vb:line 1511
at Material_Searching_System.Form2.Button1_Click (Object sender, EventArgs e) C:\Users\Sanjeewa Dissanayake\Desktop\kk\Material research System\Material research System\Form2.vb:line 29
at System.Windows.Forms.Control.OnClick (EventArgs e)
at System.Windows.Forms.Button.OnClick (EventArgs e)
at System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
at System.Windows.Forms.Control.WndProc (Message & m)
at System.Windows.Forms.ButtonBase.WndProc (Message & m)
at System.Windows.Forms.Button.WndProc (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Loading assemblies *.
mscorlib
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
Code: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
System for material
Assembly version: 1.0.0.0
Win32 Version: 1.0.0.0
Code: file:///C:/Program%20Files/Material%20Searching%20System/Material%20Searching%20System.exe
----------------------------------------
Microsoft.VisualBasic
Assembly version: 10.0.0.0
Win32 Version: 10.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Data
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data.DataSetExtensions
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
----------------------------------------
System.Numerics
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 built by: RTMRel
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.Configuration
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Transactions
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
Assembly version: 4.0.0.0
Win32 Version: 4.0.30319.1 (RTMRel.030319 - 0100)
Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------JIT debugging *.
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
permit.For example:
When JIT debugging is enabled, an unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.Hello
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
MSDN Forum (Visual Basic)
http://social.msdn.Microsoft.com/forums/en/vbgeneral/threads
Hope this information helps.
-
Saving data to the Buffer for reading
Hello
I'm new to LabVIEW has really need help here. So, I have problem on the registration of data about from the buffer (string) until I have push the Boolean stop. What I get is the data has been saved one line and not all data leave I run the program until I click on the Boolean stop. Can someone help me with this, I have already attached .vi and txt files what txt file shows what the result that I want to.
Thanks T_T
What you need to do is open the file before the start of the loop, write several times in the file inside of the loop and then close the file after the loop.
-
Is it possible to save data to the reader? I spent the last four hours to change a document and, in all likelihood, it appeared to save my data and everything was OK When I open my file - none of my changes have been saved. What gives? Please do not tell me to spend $1 300 for acrobat. Thank you.
You need only $299.
-
Saving data of damaged water Macbook Pro
So, yesterday, a little water was poured on my macbook pro. He thought first of all, it was just a dribble on the outside, (computer had been sitting firm and on the side in my backpack at the time) don't think all obtained through the keyboard... wiped it and everything worked fine. Of course in the later site I must have just turned it off, but was late, put in my backpack and went about my day. When I tried subsequently, the trackpad was goofy. I rebooted and it was fine. Later in the evening the trackpad was once again. I plugged in a wireless mouse (I needed to print something) and it worked fine, but I was nervous that there was more damage than I thought, so I stopped and left to dry overnight. This morning I tried and there are specific problems... it's just jumping around, switching windows, open applications on its own. Not good!! I closed it and put in a request to my COMPUTER technician that certainly will not respond me everyday. :-( It is currently open with a fan blowing on it.
Right now, my biggest concern is not lose my data. I have not backed up my computer in some time, irony of fate which was my plan this weekend because I'm in the middle of buying a new macbook. What is the probability of losing my data or get this computer again? I'm so angry at myself for not thinking this through as soon as possible. Other than leaving power off and waiting for news of THIS, anything else can / should I do?
Thank you!
Generally, a HARD drive will survive a 'baptism' so take out the HARD drive and install ins a speaker. Connect the USB HARD drive to another Mac and hope for the best.
Ciao.
-
I use TrueCrypt encrypt a portable hard drive. Essentially, I would like to be able to move data from my profile on this disc. Then, whenever Firefox is started on my computer without the mounted disk, it is not bookmarks/passwords / cookies saved. When I drive, I wish I could tell Firefox to consult about it and find the data in profile automatically.
Hello iffotun, you can use the Profile Manager to create a profile (which stores all your personal data) on the encrypted drive...
-
Hello
I have to save some data in some files.
The files are selected by the user using a dialog box. However, when the dialog box appears, it is unclear when the file is saved. Is it possible for the user to perform ideally what file it saves? In my program, the user has the option to save / add data to different files separately. Therefore, it becomes very confusing to remember the order in which appear the dialog boxes. Please suggest a solution to this.
Also, can you please advice how to tie the timestamps for the recorded data?
Thank you
P.S. all the data is saved in a cycle in the loop.
Dheeraj salvation,
I understand that during the recording of the user will have to choose two files? To save one and the other to add data?
If this is the case, you can tell the user which files that they save to the title of the dialog box (the file dialog box has a property named "Speedy" in which you can plug a name/text customized for your dialog window).Looked at,.
Mariana.
-
I log every 0.5 seconds in a txt file. When I need to store more values that I have in this VI structure will be very little claire. Is there a better way for the logging of data?
Yes. The 'table in spreadsheet string' function is your friend. It is in the palette 'strings '.
You have a lot of unnecessary manipulations in your code. You don't need to go from a 1 d array (you resized unnecessarily to a 1 d table... why?) to a cluster that unbundle you then, in order to get your data. You can simply use the table functions.
In addition, this case structure you - one that contains the "select" functions - is simply ridiculous.
This
Is exactly the same as it
He had a few other things in there also has no sense. I have tidied up a bit of your code, eliminated most of your useless operations, etc. Take a look.
Hope this helps,
d
-
Saving data to database access string result
I have problems when I try to save the string result data (or data additional.) to a database.
I think I need to change the schema of the database but don't know how.
I have attached a simple VI, a sequence and a database to illustrate the problem.
Appendix is a screenshot of the error message this test bench throws up.
I use TestStand 4.1.1
Can someone tell me how to overcome this problem.
Thank you
Doogle-
The DATA field in the PROP_RESULT in the PLAY.mdb table is defined as a data type of 'Number' instead of the type of data 'Text' as in the default database file included in TestStand. Somehow this type of data has changed. If restore you, it must record the channel. I noticed that the string value that you connect is binary, so TestStand will record this in a binary encoded format that might not be what you want.
-
A Microsoft Tech asked I have install "Windows Anytime Upgrade" The Tech Assurred me that I will not lose data or files. This update wipe my system completely. System Restore does not restore at the time at the beginning. Why give bad Microsoft Tech advises. You need to restore my emergency system. "Microsoft to Charge 100.00 to get Technical Support for their mistakes" (why?)
Microsoft will charge for assistance if YOU contact.
This is why I need more information from you before I can give you good advice.
A repair upgrade installation is the advice that is given to solve problems in Vista.
I would like to know where Anytime Upgrade came in things.
See you soon.
-
Plan of blackBerry Smartphones O2 PAYG - cards to access/activate BB - data needed?
Hi all, I am a beginner full and continuous gray... quickly!
I have read that I need a "data Plan" in order to download/activate/sort the cards of the BB. At the moment I have not even an icon on my BB. If I add a "bolt it ' my distribution to internet usage will be that meet the requirement of data Plan or I'm wasting my time and need to change my contract? Sorry if this seems a silly question, but I am a complete novice.
If I go to options / advanced options/applications - blackberry maps 4.7.0 is where
If I go to options / advanced options/cards it says "default service: no '"
SE cofuddled really this!
Thanxs much
Thank you. Just spoke to O2 and bolt on does NOT blackberry. I updated to a contact for only a couple more that I was paying on PAYG quid.
BlackBerry Services are only available on contract.
-
Saving data on Android and iOS?
I use AIR for Android and iOS and I need the game to save some data for things like: facebook, current level, life, last login time, ID etc...
What is the best way to do it for Android and iOS?
Use XML? The code would be as if I had to do for the standard Flash Player?
Use the sharedobject:
var so:SharedObject = SharedObject.getLocal ('yourgame','/ ');
{if (SO. Data.lastcompletedlevel)}
do all that...
}
.
.
After completing a level:
so. Data .lastcompletedlevel = levelNum;
so. Flush();
Maybe you are looking for
-
It is simply slow and freezes. I looked at the items of assistance but does not and is on all 4 of our computers. He never used to do this. All started about 4 months ago. I'm so frustrated and so is my husband. I turn on Thunderbird and go and make
-
For about two weeks, were unable to open the games on Pogo site; the home page opens but cannot open any games.Everything works fine on IE9.Any work on 8.0.1; not installed to 9.0.1 - still no such work as described above.
-
In recent days, Skype is duplication groups with a rate that seems to be a time of each connection. Please find more details in the attached screenshot, it shows how the 'friends' group appears more than once. The same problem occurs with other group
-
Satellite Pro L20: WLan connection is limited to 5 meters
HelloMy Satelite Pro L20 is connected to the Orange livebox, but cannot go further than 5 meters and disconnected. Any help?
-
Hello I control my physical robot with labview and my rio. I also have a matlab (m.file) code that uses it the Robotics Toolbox in Matlab. I would like to add this m.file to my labview program. Can I create a matlab script in the program labview and