Saving data to database access string result

Similar Questions

• Create a batch to send data to an Access database

  Is it possible to create a batch process that sends data to an Access database-specific form?

  The forms are received by e-mail and have been extended so that users with Adobe Reader software can fill them.  The batch would be processed on my computer.  I have Adobe Acrobat Professional 9.

  I'm trying to FND out how best to collect data from these forms.  If you have any other suggestions, please let me know.  The forms that are submitted are coming from all of our vendors and some of our installers - just to give you an idea of the forms how this could be, we have more than 150 vendors.

  You can provide any assistance would be greatly appreciated.

  You can add multiple files to the window of fusion...

• Access the results of the dynamic query database...

  CF colleagues:

  I need to execute a loop of 4 times, to access the four distinct values a data offline in a test results table (tbl_results), where all four are in line with the student (WHERE studentid = etc.).

  It looks like this...

  < cfset variables. TimeTotals = 0 >

  < cfloop from '1' to step "4" = = = '1' index = "timrec" >

  < cfquery datasource = "MyDSN" name = "rs_time" >

  SELECT Btime #timrec #.

  OF tbl_results

  WHERE studentid = 'jack '.

  < / cfquery >

  < cfset variables. TimeTotals = variable. TimeTotals + (? rs_time.) BTime #timrec # value?) >

  < / cfloop >

  QUESTION: How should I address this #timrec # value Btime? Not that way, I know, but how?

  Looking forward to your wisdom, with gratitude,

  Hans

  There are two ways to attack this, but you're close enough.  One way is to simply include a column alias in the query, and then use it to make reference to results:

  SELECT Btime #timrec # LIKE feeling

  OF tbl_results

  WHERE studentid = 'jack '.

• HOW TO FILTER DATA IN MICROSOFT ACCESS

  HOW TO FILTER DATA IN MICROSOFT ACCESS BASED ON THE DATE AND TIME AND GIVE THE RESULT IN A TABLE?

  I need a few examples of files, can someone help me please?

  Fix your keyboard. If it has not been broken, be a little more polite and stop screaming.

  Research, are thousands of examples on the web related to the jet and sql database. This is a very basic select statement. Access to a query wizard that can then show the sql code. If you don't know how to design a query in access, you need a Basic for this tutorial. No question of LabVIEW here.

• Unable to display data from database using persistence mobile A-team

  Hello

  We use the accelerator of persistence for Mobile A-team with application of the MAF. We built the REST services based for CRUD operations on a table. We are unable to use the POST CREATE service by application of the MAF. We tried using saveTask and addTask data control methods it generates automatically. Although it is saved locally to the iterator of data control, it doesn't push the data from database. We tried to test the service REMAINS independent and works well.

  Can anyone help regarding if lack us measures in the same?

  Thank you

  Vignesh

  Vignesh,

  Indeed, there are two issues here:

  -the attributes of the payload are different

  -the structure of the payload is different, the GET request has an attribute "Task" that returns an array, the POST request submitting a single object through the attribute "taskDetails.

  By default, the accelerator of persistence assumes that the POST request has the same payload structure and attributes as the GET request that you used to 'discover' the data objects.

  However, you can easily change this as follows:

  -To add additional attributes required in the POST, you should restart the wizard REST-JSON directly access the data object attributes screen and click on the button 'add an attribute '. Add each attribute you need in the POST request and the attribute name to the value required in the POST request payload. No matter that this attribute of the payload does not exist in the payload GET, it will be ignored during extraction of the tasks.

  -To fix the second issue, you must change the persistence - mapping.xml:

  -go to the createMethod task

  -Remove the payloadElementName attribute

  -Add the payloadRowElementName attribute and set the value to "TaskDetails.

  It's a little strange that you post in order to get other attributes, it is there another resource GET that returns all attributes for a task?

  In addition, you cannot derive columns audit as created_by on the server-side? It's a bit unusual set these values at the level of the customer.

  Steven.

• How to migrate A database data to database B

  Hello world

  I have 1 year of work, now I want to transfer data from database A to B data database (database B is including structure only) but the database A and B have some differences between the tables.

  some tables have less column and some more.second question is the B database structure may be normalized (resulting for more tables) in the database, one all fields are stored in the same table.

  How can I migrate the data from database A to B?

  Thank you

  The entire table with the same structure with datapump expport and import. The table that aren't the same struture with link of database and "insert into"table B"in select...;

• Date field - allows any string?

  I use a date and time standard on LC form field, data format = date.  However, it allows users to enter any string and am need it being only date.  I'll put a schema validation, but before adjustment, want to be sure everything first, is - it normal, that a date field allows any string type to be entered manually (they used 30 September 2014 as their answer, and when I imported the answer in Access, of course, it is not passed on the side of the access of gathering in a date field).

  One thing I noticed, is that you must put your cursor in the date fields before the datePicker drop-down menu will appear.  Is there a future plan to have the spectacle of the down arrow even if there is no cursor in the field?  Just a request for 'improvement', as someone can not notice that and keep typing.  I had assumed wrongly a date field would only accept the date in the format data, then by way of solution, put validation schemas, but it has been the hope of a better understanding of this area for the future.  Thank you!

  Post edited by: sparrowce Information - when I test validation, have put all the necessary model date, in tests, it will give the error message if I get a string, and then the field always accepts the string.  I need to know how to correctly validate the date field, thank you!

  Hi, this is the standard behavior and is the same for a decimal field when you add a format of edition as num {$zzzz9.99} you can type what you want.  So, you'll need validate the value yourself.  If the value entered corresponds to the model to edit then it will be converted to the format YYYY-MM-DD in-house, then the invalid value will be copied as it through.  This means that as long as your display template is YYYY-MM-DD an invalid date will be one who possesses a formattedValue == rawValue.  You may need to change multiple formats as well allow different formats to enter.

  These messages my help;

  http://cookbooks.Adobe.com/post_An_alternative_Date_Picker_for_LiveCycle_Designer-18455.ht ml

  http://cookbooks.Adobe.com/post_Date_handling_in_Livecycle_Designer_ES_forms-19697.html

  Concerning

  Bruce

• I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

  Do you still have the MBP? If so you can manually copy and paste the files you need.

  If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

• RunState.ProcessModelClient. how to access the results of markets located in the loops?

  Hello

  In my sequence, I have to perform an analysis of the results before I have the MainSequence and return to the process template. Basically, I need to check made some steps has passed.

  I access the results using RunState.ProcessModelClient. Using what I have access to the list of results. I would like to write that I have access to each result but I can't because I spotted the results of steps which are curly are not accessible (they are not there); However, they are on the report.

  How is it possible? How do I access results in a loop? Where are they?

  K.

  Hello

  not too painful:

  the loop results in the usual place online, it's just the layout that will look like a little confusing:

  You use some revisions of my TestStand (you are in 3.1)

  

  The Runstate.ProcessModelClient is actually a copy of the space of time edit, not space running - it's the SequenceFile type, which means that even if you can see the layout of the result containers that belong to each step, they are there permanently, and not filled in this place from the moment of execution.

  At the level of the mainsequence, you're still in your client, then you can go to Locals.ResultList directly.

  In there, you have the singular element that is the result of the first and the only stage of your Mainsequence of your.

  Inside there is the. TS. SequenceCall container. It is effectivey the resultlist gait that calls (always Mainsequence) seq1 so inside that, there is an another ResultList.

  It's the ResultList for sequence "Seq1".

  Which has a single item since this sequence has only one step inside of type SequenceCall.

  [0]. TS. SequenceCall.ResultList.

  From there you can see a lot of results even if you have only 4 effective steps in this sequence.

  12 results covers:

  3 iterations of ('for' 'Test2' 'end').

  and then the last 3 items are "Test1" loop 2 times more.

  When you set a stage of the loop and include you the results of each iteration, you get these results (2 in your case) more a global success-failure based on the criteria (your care ot 100% must pass in order to study the step successful when all iterations are complete.)

  Note in your pre Expression where you change the name of the step on the fly, your labeled Test2 incremental changes the name from 'Test1' + Str (Locals.LI), and the Test1 marked step uses the same expression for this will look slightly confused that you cross your results.

  Hope that helps.

  Thank you

  Sacha

• Can I set up custody of data between databases already available on two different servers?

  Hi, people

  Can I set up custody of data between databases already available on two different servers? If Yes please can you share the links.

  Host operating system: business Red hat Linux 6.5, 64-bit

  The two DB: Oracle 11.2.0.1

  Thank you

  But my question is that I have already two databases running on two different servers that have different data as well.

  In this case we can able to configuration data guard on these two databases.

  The answer may well be yes or no depending on what exactly you mean. Let me explain... Suppose that my Setup matches your description. I have two database servers, we will call them HOST01 and HOST02. HOST01, I have a database named ORCL1 and HOST02 I have a totally different database named ORCL2. Two databases... two hosts.

  Can I do ORCL2 a physical database ensures for ORCL1? The answer is no, I can't. I can't use another existing database to be one physical standby of another. ORCL2 must be destroyed and ORCL1 copied to HOST02 so that I have a database of duplicate.

  Can I use ORCL2 logical waiting for ORCL1? Yes. However, it would be a rare configuration.

  Can I copy ORCL1 to HOST02 and create a physical standby of ORCL1 on HOST02? And then can copy ORCL2 to HOST01 and HOST01 to provide a physical standby for ORCL2? The answer to both is Yes. You can have the other provide a standby for the guests of the database have sufficient resources to support the primary one and the expectation of the other.

  HTH,

  Brian

• Ask about the segregation of database access by using the authentication of the os in the windows environment

  Hello

  I have a question about the segragation of database access using authentication of the os (like sqlplus "/ as sysdba") in the windows environment. Let me briefly explain my requirement: -.

  Assume that you have two DBA viz DBA1 and DBA2 and 4 resideds of databases in a windows server say A, B, C and D.Now I want to configure it in a way if DBA1 opens a session on the server then it may connect to the database A and B using only OS and DBA2 authentication can connect to database C and D only use OS authentication.

  Please let me know how to configure for this requirement.

  Version of the database is 11.2.0.3

  Hello

  This doc is 11.1 but I guess it's the same in 11.2 roles on Windows and administering external users

  You create a group ORA_SID_DBA and doing it this way - in recent years I have done but it used to work ok...

  See you soon,.

  Harry

• First fall of 12 elements, all saved data lost on a new project.

  I was working on a short project that had many video and audio clips. About 3 hours in the first project elements 12 crashed. Now, it will not open the saved data. He simply said "an unknown error has occurred during the opening of the project" Am I GROUND? What should I expect as a regular from Adobe? More importantly, is there a method to recover the project? I am a new user of Adobe Elements and video editing in general.

  Thank you

  Jordan M-

  jordanmoorman84

  Thanks for the update and glad you are moving in your project of first Elements. But...

  Remember... you use first items 12/12.1 on Windows 7 32-bit. Under this condition, first elements 12 or 12.1 runs as an application 32 bit with all the limitations of a 32-bit system, namely maximum supported installed RAM = 4 GB which usually 3.2 to 3.0 GB or less available. This has major implications related to the chance for the greater realization of a project. First 12 elements is a 64-bit application in Windows ONLY when it is run on Windows 7, 8 or 8.1 64-bit. Under this condition, first 12 elements can take advantage of the 64-bit like application resources for these most important project at a greater frequency of success.

  Initially, you said that you were able to complete with success similar to the problem project projects under the existing conditions. At any time you mention no memory low message.

  The difficulty that seems to work for you involves virtual memory not physical memory (RAM). Virtual memory is disk space allocated for purposes of memory.  In view of recent developments, it would seem that the real difficulty for you is to install your first items 12/12.1 on Windows 7 64 bit with about 8 GB installed RAM. I'll go in a further analysis of virtual and physical memory and the/3 GB switch if necessary.

  Nice that you found a way forward in your projects (this is fine), please review and consider the foregoing.

  RTA

• import data from database 8i to 11 g R2

  Hi all
  
  I try to import the exported data from database 8i to Oracle 11 g server. I find in the import log.
  
  Export file created by EXPORT: V08.01.07 by conventional means
  import in WE8MSWIN1252 and AL16UTF16 NCHAR character set
  import server uses WE8ISO8859P1 (possible character set conversion) character set
  Customer export uses WE8ISO8859P1 (possible character set conversion) character set
  export server uses WE8ISO8859P1 NCHAR (possible ncharset conversion) character set
  
  is this normal?
  
  I have several version of the client installed on the client computer.
  
  I find in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > NLS_LANG = AMERICAN_AMERICA. WE8ISO8859P1
  in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > KEY_OraClient11g_home1 > NLS_LANG = AMERICAN_AMERICA. WE8MSWIN1252
  
  Is it normal that the the NLS_LANG on the same client have different values?
  
  Thank you

  YES, you can check the compatibility of * compatibility matrix for export and import between different Versions, Oracle [Video] [132904.1 ID] *.

• No data in the table of results?

  I developed a page that will load data from database in a table on the screen. No updates, no insertion.
  
  My problem is, when I test run the page (without error), no data is loaded into the table on the screen.
  Please advice on where I might be incorrect or missing.
  
  Here is the Basic for my OAF page menu...
  
  I've created AM, EO, VO with query that works into a TOAD. It returns 2 rows of data into a TOAD.
  
  PG xml structure has been installing as follows...
  
  SalHistPG
  -> PageLayoutRN (Style: pageLayout)
  -> ResultTable (Style: table)
  -> Attributes...
  
  Thank you!

  Run the query in the processRequest() as shown below.

  OAViewObject vo = applicationModule.getXXXViewObject ((OAViewObject));
  If (! vo.isPreparedForExecution ())
  vo.executeQuery ();

  If you had already done that, debug the query using jdeveloper newspapers.

  Prasanna-

• determine if my database access code is formatted

  When I zoomed in a my text field of database access by shift + F2, the text seems to be several lines. I don't know if it's supposed to be the vertical tabs, carriage returns or new lines of text as the replacement of the second function which refers to this text of database, the following code does not work:
  
  < %
  Dim memo
  Note Sun
  Dim text
  Memo = (products. Fields.Item ("CustomMemo01"). Value)
  Note = (replace (Memo, ":" ","< table > < td >""))
  text = (replace (note, "\r","< table > < /tr > < tr > < td >" "))
  % >
  
  I tried the code in the function replace with all these: / r, / n and /v but no work.
  
  Displaying this field of database on the Web page without using any function replace, the text appears on a single line with no carriage returns the formatting.
  
  How can I determine the new line formatting of my database field or if there is a problem with the replacement above code.

  > < %=""> < br=""> > Sun memo < br=""> > note dim < br=""> > dim text < br=""> > = (products. memo Fields.Item("CustomMemo01"). Value) < br=""> > note = (replace (Memo, ":","))")) < br=""> > text = (replace (note,"\r","")) < br=""> > %>
  >
  > I tried the function code replace with all these: / r, / n and /v but
  > nor work.
  >
  > Displaying this field of database on the Web page without using any
  > replace
  > function, the text will appear on one line with no carriage returns
  > formatting.
  >
  > How can I determine the new line formatting of my database field or if
  > there is
  > a problem with the replacement above code.

  http://www.Google.com/search?q=replace+vbCrLf&RLS=com.Microsoft: * & ie = UTF-8 & oe = UTF-8 & startI ndex = & startPage = 1

  text = Replace (note, + "\n",")
  ")